* 996 GT2/3 REPLACEMENT discs - GiroDiscs. Comprehensive information & pictures*
07-04-2010, 08:38 PM
#32
Burning Brakes
07-15-2011, 11:37 AM
#38
Instructor
I installed new Girodisc rotors front and rear on my 996 GT3 this week. This was a very straightforward and clean install with one exception. When converting from the stock 330 mm rear rotors to the Girodisc 350 mm rotors, the spacers provided move the caliper out 12 mm. The brake line to the caliper is rigid, and mounted via a bracket on the side of the caliper. This bracket also holds the wiring for the ABS sensor and the worn brake pad sensor. When spacing the caliper out, the brake line is fine, but the wire between the bracket and the hub gets stretched very tight. It isn't obvious how Girodisc could have solved this problem; perhaps a bracket extender to move the original bracket back in? Bending the bracket up helps, but this is a concern. Craig at Rennstore was a big help in getting this all done.
12-14-2011, 04:19 PM
#41
Rennlist Member
Craig,
Can you PM me a price for the giro disc set up fir the front and rear for an 04' GT3, also can you add prices for pagid orange for front and pagid black for the rear.
Thank You,
Stephen
Can you PM me a price for the giro disc set up fir the front and rear for an 04' GT3, also can you add prices for pagid orange for front and pagid black for the rear.
Thank You,
Stephen
12-23-2011, 04:04 AM
#43
Rennlist Member
