Motor mount opinions needed!
#16
Rennlist Member
Thread Starter
Join Date: Feb 2012
Location: Seattle, Wa.
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
BTW Matt, what are your thoughts/experience with the combination of RSS mounts, and the Function First tranny mount? What order did you install them, and what did you notice after each?
#17
Rennlist Member
I did the RSS mount first. The trany mount about a year later. I recommend doing the engine mount first. There is a little more vibration (very little) with the RSS mounts but with the trany mount there is a real increase in vibes (again still not too harsh) While I'm really happy with my updates and the additional performance they afford, I track my car and the additional harshness is okay with me.
#18
Three Wheelin'
I just got my RSS engine that are going in along with a Function-F1rst semi solid transmission insert. First thing I have to say is these things are almost too nice to actually install.
#20
Rennlist Member
Thread Starter
Join Date: Feb 2012
Location: Seattle, Wa.
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
I agree MiamiC70! The RSS mounts not only look well made, but are beautiful as well! The factory RS mounts look downright agricultural in comparison. I'd love to hear your thoughts with the combination of motor and transmission mounts.
Trj, I'd especially appreciate your experience, since you've done the motor mounts first. It sounds like the transmission insert creates a lot more vibration than the RSS motor mounts do once you combine them.
Trj, I'd especially appreciate your experience, since you've done the motor mounts first. It sounds like the transmission insert creates a lot more vibration than the RSS motor mounts do once you combine them.
#22
Don't understand this issue of apparently better shifting. The 996 has heavy cables as opposed to solid linkage for shifting. So given that the cables will move with the box while still maintaining solid connection to the gear lever assy, how does the new box mount effect this??
#25
Think of it as the librarian type that wears glasses and her hair up but has some wild tattoos down below. For your eyes only...
#26
Rennlist Member
I know this is an old post, but I recently bought the FunctionFirst yellow 70A insert and I love it. Seems like it's a perfect balance just a bit below the 80. Just a bit of rumble in the cabin, a touch of vibration through the console armrest. Shifts feel great.