Vacuum line diagram or ID please!
10-11-2010, 09:12 PM
#1
Nordschleife Master
Thread Starter
Vacuum line diagram or ID please!
I've run into a broken vent line that I cannot figure out where it goes.. anyy help would be appreciated. Post #41 in other thread...
https://rennlist.com/forums/996-foru...nge-out-2.html
https://rennlist.com/forums/996-foru...nge-out-2.html
OK I've got a problem. I was going to spend an hour putting this back together today, but I found a vacuum line that appears broken.
It's connected to a "X" connection(blue arrow), one line leads to a rubber sleeve connecting the the plenum to the intake. (light blue arrows)
One connection leads to a control valve that then goes to the resonance tube (the tube behind the plenum) (magenta arrows)
Mystery connection, it's not connected at the "X" I'm assuming I pulled it off of somewhere. (Yellow arrow)
And a broken vent line that I can't find a mate to. (green arrow)
Please help!
It's connected to a "X" connection(blue arrow), one line leads to a rubber sleeve connecting the the plenum to the intake. (light blue arrows)
One connection leads to a control valve that then goes to the resonance tube (the tube behind the plenum) (magenta arrows)
Mystery connection, it's not connected at the "X" I'm assuming I pulled it off of somewhere. (Yellow arrow)
And a broken vent line that I can't find a mate to. (green arrow)
Please help!
Last edited by Eharrison; 10-12-2010 at 01:23 PM.
