Porsche hood crest fail...
#1
Super Moderator
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: May 1998
Location: Northern New Jersey
Posts: 16,142
Likes: 0
Received 23 Likes
on
19 Posts
Porsche hood crest fail...
I open my trunk today and hear a horrible...clunk...thunk...
The hood Crest just fell sort of...off! right down the hood.
Never seen that happen before, the pins on the back just broke off.
Too bad, it was in perfect shape.
Steeeenkin badges!
Hello Suncoast!
The hood Crest just fell sort of...off! right down the hood.
Never seen that happen before, the pins on the back just broke off.
Too bad, it was in perfect shape.
Steeeenkin badges!
Hello Suncoast!
#3
Poseur
Rennlist Member
Rennlist Member
This happens occasionally. The best solution is JB Weld. Weld back on the tabs and let it cure for at least two days. Then reinstall--DO NOT overtorque the nuts. (It can also warp the badge).
#4
Super Moderator
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: May 1998
Location: Northern New Jersey
Posts: 16,142
Likes: 0
Received 23 Likes
on
19 Posts
And I never overtorque my nuts.
Had to buff out some scratches from the slide but no harm done.
Trending Topics
#12
Rennlist Member