C4S with a GT2 front bumper
 

I need help, fellas.

I have searched the board and wasn't able to find pics of a C4S with a GT2 front bumper conversion. Has anyone done this mod?

03-C4S : Did you ever proceed with this? I found a discussion thread where it appeared you were contemplating it, but no pics. I have started to toy with the idea and thought I would start with the enthusiasts on this board before raising the idea with my dealer and/or tech.

Thanks in advance.

No I have not done it yet. I just got my car back from the shop last week as I had done a GT2 wing, installed 19" Champion wheels, painted the bottom of the front lip and inserted TechArt grill inserts. Also short shifter, clear side lights, and aluminum pieces for the interior. Still more to come...

Got some Photos???

The proper conversion, requires fitting the the GT-2 brackets, air ducts, and spacer pins. Under the bumper looks alot different, and is a fairly involved conversion. (trust me, i just went through it). You will need the following:

996 504 195 30 console upper
996 504 679 31 spacer sleeve
996 504 413 30 console lower
996 575 141 30 center air duct
996 505 563 01c air inlet
996 505 564 01c air inlet
996 505 561 01c air inlet

996 106 538 72 hose GT2 center radiator hose
996 106 439 72 hose GT2 center radiator hose

As well you will need the two large air boxes, for the side vents, and one additional spacer sleeve

Approx $2K in additional parts.

Hope this helps,

03-C42 / Lyndon -

Thanks for your responses. Would love to see pics if available.

I have plenty of pictures of it..e mail me ETSMotorsports@aol.com if you care to see more. <img src="http://www.bmwm5.com/photo/data/501/5883DSC01024.JPG" alt=" - " />