show us your 996
#2071
Burning Brakes
wasn't aware Porsche had factory 17mm spacers? I always thought 5mm was factory spec.
I am putting 15mm all around, but it looks like I could have done 17mm depending on tire size.
I'll be watching for paint chips along side.
I am putting 15mm all around, but it looks like I could have done 17mm depending on tire size.
I'll be watching for paint chips along side.
#2074
Anyway, back to the thread. Some very nice cars in here.
#2075
#2076
Race Car
If you do any "spirited" driving the chips come in thick and fast haha
#2077
I don't do any driving on gravel roads, but spirited driving on tarmac - no significant chipping so far
The following users liked this post:
EVOMMM (05-31-2021)
#2081
Had a bunch of maintenance done at The RennShop in Mountain View, CA. Cleaned up the engine bay while they were at it. Love this car.
I also replaced the previous owner's garish Alpine head unit with a Continental TR7412UB-OR. Very happy with it. Looks nearly OEM and the bluetooth works great with my iPhone.
I also replaced the previous owner's garish Alpine head unit with a Continental TR7412UB-OR. Very happy with it. Looks nearly OEM and the bluetooth works great with my iPhone.
#2082
#2085
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Sorry about the rather late answer, I hadn't noticed your question. Front splitter, side sill extensions and rear bumper skirts are locally made in vacuum bagged CF. I made models out of MDF and the fabricator then did moulds. Looks are for show (clear coated CF), but they're really for GO, flat floor from the tip of the splitter until front end of the engine. A "diffuser" is in plans.
__________________
Pete
Power. Lots is good, more is better, too much is just right...
'87 951, RIP
'00 996 C2 L92U AQ / IXAA IXRB IX54 M96/7.xx G96/7.88 M030 M375 M376 M436 M476 M601 M983 ... + 991 GT3 brakes, 997 GT3 sway bars, fully monoball'd suspension, Bilstein Cup Car coilovers, do88 Big Pack ICs. 10 & 12 x 19" BBS CH-R wheels with 265/30 & 325 /30 -19 MPSC2s.
Pete
Power. Lots is good, more is better, too much is just right...
'87 951, RIP
'00 996 C2 L92U AQ / IXAA IXRB IX54 M96/7.xx G96/7.88 M030 M375 M376 M436 M476 M601 M983 ... + 991 GT3 brakes, 997 GT3 sway bars, fully monoball'd suspension, Bilstein Cup Car coilovers, do88 Big Pack ICs. 10 & 12 x 19" BBS CH-R wheels with 265/30 & 325 /30 -19 MPSC2s.