When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
OZ Alleggerita HLT powdercoated satin black. 18x8.5 et53 front and 18x12 et68 rear with 245/40 and 315/30. I had Carrera 2s on there previously which are now for sale
worm i noticed these alleggeritas come in 9” +43. You think you could fot those up front on an NB? Im on ohlins and fine with a roll if required.
Just saw this response. So basically 7 mm delta on the offset and 12.7 mm delta on the difference between the 8.5 and 9” rim? The 9” oz would therefore net poke out 7mm more than your setup? Am i looking at this correctly?
Cargraphic 3 piece racing wheels
18"×9" & 18"×11"
The rears were recently rebuilt with new barrels that we had manufactured by Cargraphic in Germany and shipped here (Thanks Speed Sport Tuning).
There were not many sets of these sent to USA, there is another member here that has a similar set.
I really like the polished outer barrel.
Hey! I never saw this question until this thread got called back from the dead. It's holding up really well, save for the gash I put on the right rear rim.
I take really good care of the paint because with all the dust in the air here it can really etch hard if left to roost. Thanks for reminding me that I need to order some hypersilver touch-up to fix my curb rash... Still loving these wheels!
Quick question.... I picked these 19" Avant Garde wheels from a P car owner who had them on his 2005 997. I'm hoping they will fit on my 04 996 but it looks like its going to be close (I realize just lining them up next to the car isnt the correct way to tell). My question is will I need spacers? I have some time as I have the stock wheels with winter tires on them on the vehicle now. The vehicle currently has Bridgestone Potenzas 235/35/19 and 295/30/19 that I'll probably switch out when I put the wheels on in the summer.
I just put a deposit on 2004 C4S Coupe with what I'm told are 18" GT3 wheels (option code 416). But they have 4S wheel centers. Are these really GT3 wheels? Anyway, I'm going to see the car Monday.
Originally Posted by parris
Yes, that was an option on latest 2004 C4S
The C4S wheels have different offsets and widths than the GT3 wheels.
Quick question.... I picked these 19" Avant Garde wheels from a P car owner who had them on his 2005 997. I'm hoping they will fit on my 04 996 but it looks like its going to be close (I realize just lining them up next to the car isnt the correct way to tell). My question is will I need spacers? I have some time as I have the stock wheels with winter tires on them on the vehicle now. The vehicle currently has Bridgestone Potenzas 235/35/19 and 295/30/19 that I'll probably switch out when I put the wheels on in the summer.
the only way to really know is by determining the offsets/widths of the AG wheels you’re installing. Figure that out and report back and we can advise further. Lookin good though!
11-21-2018, 02:42 PM
