What did you do to your 996 today?
#3841
Three Wheelin'
Back on the road. 997 shift kit feels nice, pretty close to stock 996, slightly less travel. Not notchy like the Schnell kit. Going to keep it for now, maybe try something else down the road.
#3842
Nordschleife Master
Havent done a c4 but on the c2 u can pull the bushings out and just replace them with the correct tool. It all looks the similar so im guessing it can be done. This will save u a fair amount of money but u will have to rent the tool from someone.
#3843
Rennlist Member
Yep, there are a couple of good 'how to's over on the 996TT forum - same box and mount
or this.... https://www.6speedonline.com/forums/...nt-w-pics.html
or this.... https://www.6speedonline.com/forums/...nt-w-pics.html
#3844
Rennlist Member
Enabled the outside temperature display below the tach.
I never really cared about it because it's either a nice day for a drive or it isn't - no dash display required .
I recently saw in another thread how easy it is to do, so I figured what the hay? It took less than 60 seconds.
Before
Durametric hooked up
After
I never really cared about it because it's either a nice day for a drive or it isn't - no dash display required .
I recently saw in another thread how easy it is to do, so I figured what the hay? It took less than 60 seconds.
Before
Durametric hooked up
After
#3845
Three Wheelin'
Enabled the outside temperature display below the tach.
I never really cared about it because it's either a nice day for a drive or it isn't - no dash display required .
I recently saw in another thread how easy it is to do, so I figured what the hay? It took less than 60 seconds.
I never really cared about it because it's either a nice day for a drive or it isn't - no dash display required .
I recently saw in another thread how easy it is to do, so I figured what the hay? It took less than 60 seconds.
You can also wire switches to the back of the cluster and access some of the other OBC information like distance to empty, MPG's, and things like that. I'm replacing the "dummy" buttons to the left of the climate unit with switches from Pelican and there's a guy somewhere on here that makes the wiring harness for relatively cheap.
#3846
#3848
Rennlist Member
#3849
Rennlist Member
The following 2 users liked this post by R324U:
Cityfisher (09-04-2020),
Mike Murphy (09-04-2020)
#3851
Computer activation wasn't an option. OBC with the fourth stalk was the option. From the factory, everything was in place except that.
The following users liked this post:
Billup (09-04-2020)
#3852
I did this, er, had this done.
The following 3 users liked this post by JBSL:
#3853
Rennlist Member
The following 2 users liked this post by az968gpw:
JBSL (09-05-2020),
Mike Murphy (09-06-2020)
#3854
RL Community Team
Rennlist Member
Rennlist Member
The following 2 users liked this post by TexSquirrel:
JBSL (09-06-2020),
Mike Murphy (09-06-2020)
#3855
RL Community Team
Rennlist Member
Rennlist Member
Today @Z996Z, my son, a co-worker and I went on a drive down to the coast and back.(with a quick detour into Mexico. )
We took mostly backroads.
It was a VERY fun (and fast) drive, just us 2 996s and my co-worker in his manual Mustang GT.
We kept having to slow down to let the Mustang catch up.
We also stopped at Buc-ees for some ethanol free fuel!
Here's Z996Z's car:
Here's mine:
...and the Mustang GT:
We took mostly backroads.
It was a VERY fun (and fast) drive, just us 2 996s and my co-worker in his manual Mustang GT.
We kept having to slow down to let the Mustang catch up.
We also stopped at Buc-ees for some ethanol free fuel!
Here's Z996Z's car:
Here's mine:
...and the Mustang GT:
Last edited by TexSquirrel; 09-05-2020 at 05:02 PM.
The following 7 users liked this post by TexSquirrel:
Billup (09-06-2020),
golock911 (09-05-2020),
Mike Murphy (09-06-2020),
paddlefoot64 (09-05-2020),
Porschetech3 (09-06-2020),
and 2 others liked this post.