996 Cup Car wing specs?
01-08-2018, 04:00 PM
#1
Intermediate
Thread Starter
996 Cup Car wing specs?
Would anyone have a link to the spec's on this wing? I'm looking for overall width and the mounting bracket location on the wing plane itself. Going to install on a 997.
01-08-2018, 06:53 PM
#2
Rennlist Member
Here's the rules for the SP996 which is based on the 996 Cup wing. Might try some of the other forums if that's not what you are looking for.
"Rear wings may be stock, year appropriate factory Aero wing, or Getty Design 996 Spec Wing and decklid
assembly. The approved Getty Design 996 Spec Wing may be raised four inches to gain better rear vision, but may
not otherwise be altered or repositioned. No carbon fiber is allowed. A Gurney flap on the Getty Design 996 Spec
wing with a height not to exceed 1" is allowed. The "optional top scoop" on the Getty design 996 Spec wing is no
longer allowed. "
"Rear wings may be stock, year appropriate factory Aero wing, or Getty Design 996 Spec Wing and decklid
assembly. The approved Getty Design 996 Spec Wing may be raised four inches to gain better rear vision, but may
not otherwise be altered or repositioned. No carbon fiber is allowed. A Gurney flap on the Getty Design 996 Spec
wing with a height not to exceed 1" is allowed. The "optional top scoop" on the Getty design 996 Spec wing is no
longer allowed. "