Getting my fan and shroud refurbished and need help identifying color
02-22-2017, 09:30 PM
Pro
Thread Starter
Join Date: Jan 2010
Posts: 739
Quote:
Cerakote is absolutely compatible with magnesium with no change in temperature stability.
Absolutely, this was a concern I had but was told it's fine.
02-23-2017, 05:55 PM
Pro
Join Date: Jan 2010
Location: Bolton UK
Posts: 634
Quote:
Originally Posted by
P-daddy
A local Shadetree Speedshop recommended this color for my last shroud paint job. It turned out terrific!
How did you prep it before painting? I have a lot of chalky deposit on the interior of the shroud.
11-02-2018, 12:58 PM
7th Gear
Join Date: Sep 2018
Location: Boise, ID
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Satin Mag is the cerakote color.
11-05-2018, 10:52 AM
Pro
Join Date: Jan 2017
Location: CT
Posts: 701
I'd like to do this as well. Do the shroud and fan come off easily?
11-05-2018, 07:27 PM
Rennlist Member
Join Date: Nov 2010
Location: MD
Posts: 6,973
Quote:
Originally Posted by
Endoman
How did you prep it before painting? I have a lot of chalky deposit on the interior of the shroud.
Oops... pardon the delay. Bead blast
Quote:
Originally Posted by
Jay777
I'd like to do this as well. Do the shroud and fan come off easily?
If you’re handy with tools, not bad at all. The only special tool you’ll need is a 3-prong puller to extract the fan from the fan bearing/alt shaft.