Rennlist - Porsche Discussion Forums

Rennlist - Porsche Discussion Forums (https://rennlist.com/forums/)
-   993 Forum (https://rennlist.com/forums/993-forum-58/)
-   -   Cracked Fan Cover? (https://rennlist.com/forums/993-forum/936449-cracked-fan-cover.html)

Arrwin 05-27-2016 01:50 AM

Cracked Fan Cover?
 
2 Attachment(s)
Has this ever happened to anyone? What is this part called?

myflat6 05-27-2016 02:10 AM

Very common failure and easy to replace. Part # 993.106.403.00

Arrwin 05-31-2016 03:02 PM


Originally Posted by myflat6 (Post 13324261)
Very common failure and easy to replace. Part # 993.106.403.00

Good to hear! Thanks for the quick reference. :thumbup:

phoneyman 05-31-2016 03:09 PM

There are 2 versions of that part. Might be worth a check to see which part you have before ordering a new one.

Arrwin 05-31-2016 03:32 PM


Originally Posted by phoneyman (Post 13335136)
There are 2 versions of that part. Might be worth a check to see which part you have before ordering a new one.

Thanks for the tip. Anything in particular I should look for?

Also...looks like a very simple swap and replace....even I can handle??! :)

phoneyman 05-31-2016 04:20 PM

I think the two versions are split between MY '94-'95 and MY '96+. Since you have a 1996 I'm guessing youll have the second version, but if its been replaced in the past it could be the early version. The part number is stamped on the shroud somewhere, but I think its on the inside.

Swapping it is pretty easy. Some of the fasteners are a little tricky to reach, but if you have a good tool chest it shouldnt be bad. Also youll probably want to remove the blower box, or loosen it enough. Good luck.

Arrwin 05-31-2016 04:27 PM


Originally Posted by phoneyman (Post 13335317)
I think the two versions are split between MY '94-'95 and MY '96+. Since you have a 1996 I'm guessing youll have the second version, but if its been replaced in the past it could be the early version. The part number is stamped on the shroud somewhere, but I think its on the inside.

Swapping it is pretty easy. Some of the fasteners are a little tricky to reach, but if you have a good tool chest it shouldnt be bad. Also youll probably want to remove the blower box, or loosen it enough. Good luck.

Great thanks again. I will have a look.

doublecabmel 05-31-2016 07:28 PM

I replaced mine

vincer77 05-31-2016 07:54 PM

This failure seems to be the most common failure on 993s and finding it is almost an initiation rite into 993-ownership. Your heart sinks when you see it.

jwduncan 10-08-2016 03:33 PM

Replaced mine today. Easy job thanks to all the info on this forum.

Ed Hughes 10-08-2016 03:57 PM

For future reference, if anyone were to actually do a search on this-It's not that tough to determine the proper part. The upward facing air vent with the grid in the top pic's LH side dictates the 993 part. If you don't have that, it's the 964 part.

nine9six 10-09-2016 08:45 PM


Originally Posted by Ed Hughes (Post 13661361)
For future reference, if anyone were to actually do a search on this-It's not that tough to determine the proper part. The upward facing air vent with the grid in the top pic's LH side dictates the 993 part. If you don't have that, it's the 964 part.

What Ed said! ;)


All times are GMT -3. The time now is 07:14 AM.


© 2024 MH Sub I, LLC dba Internet Brands