Charge-o-mat pro question
#1
Race Car
Thread Starter
Charge-o-mat pro question
I just bought the latest model, since my old one stopped working. Funny thing is I plugged it in as usual, selected the correct mode, but none of the battery state lamps lit up. Do not know if it is functioning properly. The old model was simpler: you just plugged it in and selected car battery and you had two lights: loading and loaded. The newer model has different levels of loading. These do not light up at all. Any ideas? Also, after some time the power indicator blinks. thanks
#2
Rennlist Member
I just bought the latest model, since my old one stopped working. Funny thing is I plugged it in as usual, selected the correct mode, but none of the battery state lamps lit up. Do not know if it is functioning properly. The old model was simpler: you just plugged it in and selected car battery and you had two lights: loading and loaded. The newer model has different levels of loading. These do not light up at all. Any ideas? Also, after some time the power indicator blinks. thanks
Slop in the hole is not a good thing -
Here is a picture of the adapter sleeve. I've done this and it works well. If your light blinks after a while it usually means you have no connection which is where the sleeve comes in.
The part number shown is for O'rileys here in the states.
Regards,
.
#4
Rennlist Member
@cemoto This is a great hack! Thank you.
I was going ghetto style with electrical tape around the cig adapter so it would stay in. Would have to replace it every few times before it would stop working by getting chewed up as I switch between my google phone charger and v1...
I was going ghetto style with electrical tape around the cig adapter so it would stay in. Would have to replace it every few times before it would stop working by getting chewed up as I switch between my google phone charger and v1...
Last edited by samurai_k; 12-26-2017 at 08:15 PM.
#7
Rennlist Member
Thanks, Cemoto. Great info. I just ordered one.
Trending Topics
#8
Rennlist Member
Thanks but I cannot take credit for this, someone else did their homework, I just saved the photo. there is another thread on this somewhere.
Here is a shot of one of mine to show the cut size - make sure you file down any burrs after cutting.
Regards,
.
#10
I need to attach Porsche Charge-o-mat Pro to my 2023 911 battery, since using the 12v socket will not allow charger to work. Please tell me the sequence for connecting to and disconnecting from the battery terminals that works for you. Is it red and then black for connecting and black and then red for disconnecting, all of course done after the charger is unplugged, I presume. Also, do you leave the Charge-O-Mat adapter with the clamps connected and in the car all the time? Danke.
#11
I need to attach Porsche Charge-o-mat Pro to my 2023 911 battery using the cable adapter with clamps, since using the 12v socket will not allow charger to work. Please tell me the sequence for connecting to and disconnecting from the battery terminals that works for you. Is it red and then black for connecting and black and then red for disconnecting, all of course done after the charger is unplugged, I presume. Also, do you leave the Charge-O-Mat adapter with the clamps connected and in the car all the time? Danke.