Post pics of your Fister Mufflers w/ Ceramic Coatings
#1
Rennlist Member
Thread Starter
Post pics of your Fister Mufflers w/ Ceramic Coatings
I'm probably going to send my stock mufflers up to Darin to convert to II's. They are in the shed gathering dust, while I run with my RSR's. I don't think I want III's, but I want more than RSR sound.
I wasn't going to coat them, but now I think I might. I'd like to see pics of mufflers with the various ceramic offerings available: Velvet Black, Titanium, Mag Silver and Cermachrome. Thanks in advance!
I wasn't going to coat them, but now I think I might. I'd like to see pics of mufflers with the various ceramic offerings available: Velvet Black, Titanium, Mag Silver and Cermachrome. Thanks in advance!
#7
RL Community Team
Rennlist Member
Rennlist Member
I have black II's and tips just like Jakob's pictures. I say go with the coating, it is supposed to lower the temps and that is always a good thing.
Trending Topics
#10
Rennlist Member
Ed- I had 3's and switched to 2's. I thought the 2's were perfect; a little spit and growl when you wanted to hear it and fairly docile, but not too docile otherwise. To me, the 3's were too loud at 3000-3500 rpm, which is freeway cruising range. Ymmv. I do miss that sound
#13
Rennlist Member
Thread Starter
There is no doubt I'm going with 2's.......OK, we have black and cermachrome well represented-thanks guys(!), I'd like to see the Titanium and Mag versions, if others have them?
#14
Rennlist Member
Ed- I had 3's and switched to 2's. I thought the 2's were perfect; a little spit and growl when you wanted to hear it and fairly docile, but not too docile otherwise. To me, the 3's were too loud at 3000-3500 rpm, which is freeway cruising range. Ymmv. I do miss that sound
--Michael
#15
Point of interest to me when speaking with Darin was that the black coating was the thickest of all of them there by have the best performance for heat. In case that matters to you , for the turbo it made sense