993 Project: The Analysis
#138
Burning Brakes
#145
Banned
Join Date: Aug 2011
Location: 6feet under snow of CANADA
Posts: 3,665
Likes: 0
Received 0 Likes
on
0 Posts
great thread, I enjoyed re reading thru the whole build this morning, what are your plans for the front seat belt lower covers?
the new wheels are nice and fitment looks great. where did you buy the rear carpet set?
Have you fitted the RSR uprights and bearings / Tierods? Any issues with bump stear?
the new wheels are nice and fitment looks great. where did you buy the rear carpet set?
Have you fitted the RSR uprights and bearings / Tierods? Any issues with bump stear?
#146
Thanks! I'm glad you enjoyed the whole thread
The front seat brackets will either be done in black or will be ordered as stock from Recaro. The reason belt covers stand a bit further is for comfort for street use. Over here, we don't usually get many track days as we hope.
The rear carpet was done with the complete interior being reupholstered. However, I have talked with Porsche Motorsports and they have the rear wall with the GT script in 3 colors, however I don't think its right to label the car as such since its just a Tribute
And funny enough, I haven't bought the RSR uprights/bearings/tierods, and with the 19's, there isn't a single rub or anything We only managed to get -1.60 camber on the fronts and lowered the car accordingly (15mm front spacers) and the final result is more than satisfying. I was thinking of getting a set of camber plates/top mounts but we did the job correctly. So I thought it would have been too rough for the street use and I can live with a little bit of bumpsteer. It takes time and effort to get everything right but you know what they say, it's the journey...
The front seat brackets will either be done in black or will be ordered as stock from Recaro. The reason belt covers stand a bit further is for comfort for street use. Over here, we don't usually get many track days as we hope.
The rear carpet was done with the complete interior being reupholstered. However, I have talked with Porsche Motorsports and they have the rear wall with the GT script in 3 colors, however I don't think its right to label the car as such since its just a Tribute
And funny enough, I haven't bought the RSR uprights/bearings/tierods, and with the 19's, there isn't a single rub or anything We only managed to get -1.60 camber on the fronts and lowered the car accordingly (15mm front spacers) and the final result is more than satisfying. I was thinking of getting a set of camber plates/top mounts but we did the job correctly. So I thought it would have been too rough for the street use and I can live with a little bit of bumpsteer. It takes time and effort to get everything right but you know what they say, it's the journey...
great thread, I enjoyed re reading thru the whole build this morning, what are your plans for the front seat belt lower covers?
the new wheels are nice and fitment looks great. where did you buy the rear carpet set?
Have you fitted the RSR uprights and bearings / Tierods? Any issues with bump stear?
the new wheels are nice and fitment looks great. where did you buy the rear carpet set?
Have you fitted the RSR uprights and bearings / Tierods? Any issues with bump stear?