9m93RS Clubsport #5 from USA origin Carrera 4
#33
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Wiring loom removal - 9m style.
Mark took a break from his usual engine building duties today to enjoy the satisfaction of pulling the loom out of the shell and finishing the glue removal. If only the cars go back together as easily as they come apart....
Mark took a break from his usual engine building duties today to enjoy the satisfaction of pulling the loom out of the shell and finishing the glue removal. If only the cars go back together as easily as they come apart....
#34
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
And the result is the complete wiring harness on the workshop floor ready to be stripped and converted to RS specification.
#35
#41
I really admire you folks at Ninemeister. However, it also comes with a healthy dose of frustration since I cannot afford your magic without a nice bank heist as a part of my plan
#42
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
That's fine, just include not getting caught into the scheme and I'm sure we would be soon talking to each other! The alternative strategy is to keep buying lottery tickets, but that seems not to be working quite as well as expected.
#43
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Glue, glue, Barney McGlue, Cuthbert, Dibble and Grub.....
The quest continues, the lads dropping onto the shell in between other jobs to continue with the quest for a non-stick interior. Before anyone asks, yes, the lads completely hate this job but they would rather be employed than not. There is no immediate pressure to complete since the jig is currently tied up with another fabrication project and the cage tubing is yet to arrive, however once everything is here we will be more than ready for the welding phase to begin.
The quest continues, the lads dropping onto the shell in between other jobs to continue with the quest for a non-stick interior. Before anyone asks, yes, the lads completely hate this job but they would rather be employed than not. There is no immediate pressure to complete since the jig is currently tied up with another fabrication project and the cage tubing is yet to arrive, however once everything is here we will be more than ready for the welding phase to begin.