Rennlist - Porsche Discussion Forums

Rennlist - Porsche Discussion Forums (https://rennlist.com/forums/)
-   993 Forum (https://rennlist.com/forums/993-forum-58/)
-   -   FS 993 TRG suspension and Fabspeed exhaust set (https://rennlist.com/forums/993-forum/720595-fs-993-trg-suspension-and-fabspeed-exhaust-set.html)

RP993 10-08-2012 03:27 AM

FS 993 TRG suspension and Fabspeed exhaust set
 
hello to everybody!

i have just listed some special sport/race parts for N/A 993's which were removed from my new-to-me 993 C2. The previous owner used the car as a track toy but it was too hard as a street car, so i degraded the car with factory parts.

TRG suspension kit:

https://rennlist.com/forums/parts-ma...uspension.html

Fabspeed exhaust kit:

https://rennlist.com/forums/parts-ma...haust-set.html

the parts are located at 95404 Northern California. Local pick-up or shipping

if you have any question, feel free to ask.

Maris66ol 10-08-2012 04:00 AM

Fabspeed exhaust kit:
http://www.qmku.info/3.jpg

Bill Verburg 10-08-2012 11:26 AM

The suspension is very desirable and the shocksare getting very difficult to come by, It took me a couple of months to get the shocks this spring

bdf 10-08-2012 06:43 PM

Sorry for the hijack.

Bill

What spring rates do you have? Reason I ask is I have the same suspension listed custom valved for 600/800. At the time the set up was for primarily track work so a little too stiff for street. I am doing less track these days so I would like to soften it up a bit for street drives and to keep my kidneys a little longer. I was considering going to a Motion Control or similar adjustable set up but have not yet made up my mind.

Thanks

Brian

bobt993 10-08-2012 06:49 PM


Originally Posted by Bill Verburg (Post 9901407)
The suspension is very desirable and the shocksare getting very difficult to come by, It took me a couple of months to get the shocks this spring


Bill,

I did not know this. I still have a set sitting in my garage when I went to Motons. :banghead:

Bill Verburg 10-08-2012 06:58 PM


Originally Posted by bdf (Post 9902592)
Sorry for the hijack.

Bill

What spring rates do you have? Reason I ask is I have the same suspension listed custom valved for 600/800. At the time the set up was for primarily track work so a little too stiff for street. I am doing less track these days so I would like to soften it up a bit for street drives and to keep my kidneys a little longer. I was considering going to a Motion Control or similar adjustable set up but have not yet made up my mind.

Thanks

Brian

600/750

Bill Verburg 10-08-2012 06:58 PM


Originally Posted by bobt993 (Post 9902598)
Bill,

I did not know this. I still have a set sitting in my garage when I went to Motons. :banghead:

wish i had known, it would have saved a lot of grief


All times are GMT -3. The time now is 02:40 AM.


© 2024 MH Sub I, LLC dba Internet Brands