Recap of the SAI circuit
#211
If it's not too late, I would like the enclosure as well. Or whatever version of the kit that is the most complete possible. I'm not an electrician, so the less assembly for me the better. Many thanks again.
#212
Addict
Rennlist Member
Rennlist Member
Edit: Added 2nd List request from lizSter, added enclosures for TxnBluDvl (don't know if Lewis has ordered enclosures already or not)
This list for the first round of boards is now closed. I've started a Waiting/Back-up list below for those that missed this first run.
Quick reminders:
1) unless otherwise noted, it's assumed you are asking for an assembled unit.
2) enclosures are optional - feel free to update/ Post a reply/ PM and I'll update the list if you are looking for an enclosure.
Payment Info posted by Lewis (from post #147):
Once assembled, I will start sending PM's so folks can provide me their shipping addresses. Inside the package will be the unit, a hardcopy of the schematic, a hardcopy of the PCB layout and a return address envelope. When you get the unit and everything is OK, just use the envelope to send payment. I am a trusting person when it comes to RL members, so I have no problem sending out the units prior to receiving payment.
Backup/Waiting/2nd Round List
This list for the first round of boards is now closed. I've started a Waiting/Back-up list below for those that missed this first run.
Quick reminders:
1) unless otherwise noted, it's assumed you are asking for an assembled unit.
2) enclosures are optional - feel free to update/ Post a reply/ PM and I'll update the list if you are looking for an enclosure.
Payment Info posted by Lewis (from post #147):
Once assembled, I will start sending PM's so folks can provide me their shipping addresses. Inside the package will be the unit, a hardcopy of the schematic, a hardcopy of the PCB layout and a return address envelope. When you get the unit and everything is OK, just use the envelope to send payment. I am a trusting person when it comes to RL members, so I have no problem sending out the units prior to receiving payment.
- vincer77 - 1
- Rick Lee - 1
- Aircooled Dave - 1
- michaelh993 - 2
- tonypai - 1 + enclosure
- fullbooker - 1 + enclosure
- NP993 - 1 + enclosure
- flying low - 4
- ilko - 1 + enclosure
- 600RR - 2 + 1 enclosure only
- Shahrams - 2 + enclosures
- bw993 - 1
- tbil - 1 + enclosure
- Teddy2 - 1 + enclosure
- Ash - 1 + enclosure
- 993BillW - 1 + enclosure
- Dan V - 1 kit
- efong - 1 + enclosure
- AW21 - 2 + enclosures
- NC TRACKRAT - 1 assembled + 1 kit + 2 enclosures
- cabrio993 - 1
- Paul M - 1 + enclosure
- tropheus - 2 + enclosures
- C4SJOHN - 2 + enclosures
- MDamen - 1
- TheBen - 1
- JPS - 1
- air993 - 1 + enclosure
- alpinadvl - 1 + enclosure
- rsa964 - 1
- cdmdriver - 1
- Jeff96-993 - 1 + enclosure
- Kaefer - 2 + enclosures
- SimonM_98 - 1
- CarreraX - 2 + enclosures
- skypig - 1 + enclosure
- Don't lift - 1 + enclosure
- 2ndof2 - 1
- Richard W - 1 assembled + 1 kit + 1 enclosure
- Amfab - 1 + enclosure
- M Fig - 2
- e3photo - 1
- 911Dave - 1
- kraftsman - 1 + enclosure
- PNogC2S - 1
- CAHRERA - 1
- slapshot - 1 + enclosure
- bpras@msn.com - 2
- Blue TTop - 2 + enclosures
- rdevany - 1 kit + 1 enclosure
- earossi - 1 + enclosure
- sdrake - 1
- cmat - 1 kit + enclosure
- Teddy2 - 1 + enclosure
- jaguarandi - 1 + enclosure
- Biggdawg - 2 + enclosures
- mike cap - 1 + enclosure
- deekay911 - 1 + enclosure
- helmet993 - 1 + enclosure
- ppressle - 1 kit
- southsong - 1 + enclosure
- V33 - 2 + enclosures
- nels415 - 1 + enclosure
- vr416v - 1 + enclosure
- Don Plumley - 1
- Matt Lane -1 + enclosure
- Jim W - 1 + enclosure
- TxnBluDvl - 2 + enclosures
- mpgandco - 2 + enclosures
- GRINBOB - 1 kit + 1 enclosure
- beagling - 1 + enclosure
- Jscanavan - 2 kits + 2 enclosures
- Richard Lee - 1 + enclosure
- dbog - 1 + enclosure
- bootman30 - 1
- 77'3.6vram - 3 + enclosures
Backup/Waiting/2nd Round List
- DryFly - 1 + enclosure
- ESL - 1 + enclosure
- timothymoffat - 2 + enclosures
- suffi - 1 kit
- tom97c4s - 1 + enclosure
- lizSter - 1 + enclosure
Last edited by Ash; 10-30-2011 at 04:38 AM.
#215
Rennlist Member
Join Date: Apr 2006
Location: Rainforest (Vancouver, BC)
Posts: 7,512
Received 979 Likes
on
433 Posts
Note to self: READ THE DAMNED STICKIES!
Can I be put on a list if this goes two rounds? I'd like 2 fully assembled with the enclosures and anything else to make it complete.
Lewis, this is more than generous.
Can I be put on a list if this goes two rounds? I'd like 2 fully assembled with the enclosures and anything else to make it complete.
Lewis, this is more than generous.
#216
Super Moderator
Needs More Cowbell
Lifetime Rennlist
Member
Needs More Cowbell
Lifetime Rennlist
Member
Here is the PCB pricing from post #107 ....
$28.26 each for qty 10
$11.94 each for qty 25
$6.50 each for qty 50
$3.78 each for qty 100
Again, I don't mind doing a second round. If there aren't 100, they will just cost a bit more than the first round.
Or if someone would like to go it "on their own" , I will gladly provide the schematic and artwork files.
$28.26 each for qty 10
$11.94 each for qty 25
$6.50 each for qty 50
$3.78 each for qty 100
Again, I don't mind doing a second round. If there aren't 100, they will just cost a bit more than the first round.
Or if someone would like to go it "on their own" , I will gladly provide the schematic and artwork files.
#218
Race Director
#219
Super Moderator
Needs More Cowbell
Lifetime Rennlist
Member
Needs More Cowbell
Lifetime Rennlist
Member
Again, I don't mind a second round.
I just want to avoid confusion or issues regarding the possibility for the 2nd round units to be more expensive than the 1st round units, simply due to the number ordered.
I am charging exactly what these cost, I post the actual prices for the parts + shipping.
#221
Round 2 List: See Ash's current list at post #212
Yes Lewis, we understand that the cost is greater this round. Thats just the way it goes for us that are slow at the switch! It is still cheap at this price.
Lets get to at least 10! $28.26/ each (or so)
Thank You, this is very generous of you.
Lets get to at least 10! $28.26/ each (or so)
Thank You, this is very generous of you.
#222
Super Moderator
Needs More Cowbell
Lifetime Rennlist
Member
Needs More Cowbell
Lifetime Rennlist
Member
So the major cost of a second round (less than 100) will be the PCB.