cgfen

image taken from P-Car.com DIY.

http://p-car.com/diy/motormount/

What is so special about the washer shown as part #15 999.025.074.02 Washer (qty 4).

List price = $12.06
Sunset price = $7.21

That seems pricey for what looks like a flat washer.
Is it hardened, or is it a bushing or????

thanks

Craig

chris walrod

Its just very large with a small ID. Doubtful you will find it locally.

AOW162435

+1. Very thick. Go with the Porsche washers.


Andreas

MarkD

+2 or is it 3?

Anyhow, yeah, stupid price but necessary... unfortunately.

KMASS993

They also have a slight concave shape to them that makes them fit over the bushing better. When it comes to genuine parts in important areas on my car I don't screw around with stuff like that, the extra cost is worth the peace of mind in my book.

MarkD

yes, one of them has a curve to it... he was asking about the smaller, thick, way overpriced flat washer that sits on the outside of those larger washers. (#15 in PET diagram above)

Van1

Like everybody else has stated, it's pricey but necessary. For what it's worth, I paid $7.27 ea three years ago from Sunset. List was $12.15. So not all Pcar parts have gone up in price. You are getting a bargain.

KMASS993

Ahh, my bad (rennlisting in between work!), that washer is pretty plain, no real argument there, but it does have the pressure of the entire engine on it.

kjr914

It goes on a Porsche.


Pay up Cheapskate! errr, I mean, pay up Craig!
I just did! All the parts for the RS mount conversion are on order from Sunset!

ps. Good to see you and Maya Sat night! Even better to sit in a CGT and blip the throttle...

Flying Finn

+1

Another one of these occasions when I wish Ray Calvo was still around , I miss him...

cgfen

Thanks for info Chris and Mark.

You bet your a$$ I'm cheap.
We should have combined the orders so YOU paid the shipping.

"Even better to sit in a CGT and blip the throttle... "
name dropper......................

cheers

Craig

Jay J

Anyone know what the dimensions are of PN #15. I bought #13 from the dealer but I'm certain I can get better grade washers and bolts that aren't just Zinc coated from McMaster

rg0115

I just bought my motor mounts from Gert. The washer is 1 1/8 inches. Here are some pictures of the instruction and parts that came with my kit. Hope this help.

Jay J

Would I be able to trouble you to the length of the smaller bolts..I found the bigger bolt size.

rg0115

I didn't get the small bolt with my kit. Gert's instructions say to reuse the ones from the OEM mounts.