993 Clutch Disk Specificiations?
09-23-2021, 03:58 PM
#1
993 Clutch Disk Specificiations?
Hi All,
Does anyone know what the correct 993 clutch specs are (trying to see if an alternative solution will work).
I believe its a 240mm disk (9.4")? (Outer Diamater)
23 splines
1" Spline Diameter
(Factory Contact Patch of the disk itself a is a 30.15mm), but you can go up to 40.17mm?
Does anyone know what the correct offset should be?
(I think Sachs list it as 23,3x26,3-23N)
Does anyone know what the correct 993 clutch specs are (trying to see if an alternative solution will work).
I believe its a 240mm disk (9.4")? (Outer Diamater)
23 splines
1" Spline Diameter
(Factory Contact Patch of the disk itself a is a 30.15mm), but you can go up to 40.17mm?
Does anyone know what the correct offset should be?
(I think Sachs list it as 23,3x26,3-23N)
Last edited by Jay J; 09-23-2021 at 04:05 PM.
09-23-2021, 05:09 PM
#2
RL Community Team
Rennlist Member
Rennlist Member
Hi Jay,
Why do you ask as replacement clutches are generally sold by application, not physical specification?
Andy
Why do you ask as replacement clutches are generally sold by application, not physical specification?
Andy