993/964 distributor bearing needed
#31
Rennlist Member
Dieter, you show an INA NX 12-Z-XL bearing in that photo. That one does not have the necessary oiling holes that the stock bearing has. That one is meant for grease application.
The one I bought is the INA NX 12-XL as shown below and is also the same as the ones I have removed from original 993 distributors. It has the necessary oiling holes in the body of the bearing.
The one I bought is the INA NX 12-XL as shown below and is also the same as the ones I have removed from original 993 distributors. It has the necessary oiling holes in the body of the bearing.
#33
Rennlist Member
I just ordered the correct bearings from Dirk, including the oil version as recommended by Alex a few posts above, now branded as NX12-XL (Xlife).
Cheers
Matt
Cheers
Matt
#35
Rennlist Member
Hello, I need complete bearing set for 2005 993 duistibutor, 3 (7210) and 1(NX12-XL)
Do you have them, how much shipped to Kansas City, 64106, USA.
Thanks
John
joc.systems@gmail.com
Do you have them, how much shipped to Kansas City, 64106, USA.
Thanks
John
joc.systems@gmail.com
#36
Rennlist Member
Ask the shop and verify if they are stripping the whole dual distributor down, cleaning every bit and then greasing what needs to be greased, or are they just installing a belt and new drive pin.
These are twenty years old now and most of the bearings I have come across are rusty in color and at the very least, the grease has turned to wax.
Matt's 993 Dual Distributor Rebuild
These are twenty years old now and most of the bearings I have come across are rusty in color and at the very least, the grease has turned to wax.
Matt's 993 Dual Distributor Rebuild
#38
Technical Guru
Rennlist Member
Rennlist Member
#39
Rennlist Member