MY02 Hose Reel...
#1
Seared
Rennlist Member
Rennlist Member
Thread Starter
MY02 Hose Reel...
I've wanted to make a garden hose reel/holder for quite some time - yet I lacked a key ingredient. A welder.
I settled on an 8" wheel and used 1/4" steel plate and 1/4" wall, schedule 40, 3.5" O.D. steel pipe. For studs, I simply shortened a handful of 18mm x 1.25 bolts.
I think the project turned out pretty well. My welding skillz are abysmal, but my beads will hold. No question. The wheel is held on with a set of used 993 lug nuts, torqued to whatever felt right.
Enjoy the pics:
Andreas
I settled on an 8" wheel and used 1/4" steel plate and 1/4" wall, schedule 40, 3.5" O.D. steel pipe. For studs, I simply shortened a handful of 18mm x 1.25 bolts.
I think the project turned out pretty well. My welding skillz are abysmal, but my beads will hold. No question. The wheel is held on with a set of used 993 lug nuts, torqued to whatever felt right.
Enjoy the pics:
Andreas
Last edited by AOW162435; 05-12-2008 at 10:54 PM.
Trending Topics
#9
Seared
Rennlist Member
Rennlist Member
Thread Starter
#11
Rennlist Member
Aaaah, nothing like a Porsche wheel on the side of the house to tell thieves: Porsche Enthusiast Here! Cool Car For You To Steal In Garage!
Your car does have the immobilizer, right?
j/k Nice work, AOW.
Your car does have the immobilizer, right?
j/k Nice work, AOW.