When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Is this something new? A year ago, maybe a year and a half, I tried building my own ciruit board based on some info here on Rennlist. I never could get my home-made scantool to work, but at that time, I thought the only alternative was a very expensive "hammer".
Is this something new? A year ago, maybe a year and a half, I tried building my own ciruit board based on some info here on Rennlist. I never could get my home-made scantool to work, but at that time, I thought the only alternative was a very expensive "hammer".
I don't know when it came out, but it has been discussed here, on Pelican Parts and at renntech.org before.
Is this something new? A year ago, maybe a year and a half, I tried building my own ciruit board based on some info here on Rennlist. I never could get my home-made scantool to work, but at that time, I thought the only alternative was a very expensive "hammer".
+1, Based on this Post. I realize that it was a bit old and then raycm designed a circuit and cowtown had some PCB's made, so I jumped on it. Well, I got about 90% of the way done and then lost interest because I didn't really have a need for it yet. So there it sits on my workbench needing to be completed. Maybe if I actually have the need, it will get finished. . . or maybe not, now that I know the Durametric tool is available !!!