DIY: Removal of Intake Manifold (96+) and SAI pump fix (Pic intensive)
The following users liked this post:
Sagres74 (02-01-2022)
#32
Nice job. It's a good little project to knock off the list.
-Scott
-Scott
#33
Rennlist Member
Great time to also replace the engine sound pad and plug wires if its been awhile, among other things I'm sure. I replaced my sound pad when my intake manifold was out but unfortunately didn't repair these SAI pump wires. Time to jump back in.
The following 5 users liked this post by myfn993:
1997hmc993 (01-31-2022),
71-3.0-911 (01-31-2022),
m32 (05-04-2022),
rdad993 (01-31-2022),
tbil (05-25-2022)
#35
Curious as to why your intake assembly has hex heads instead of the normal allen cap head screws....
-Scott
-Scott
#37
Rennlist Member
My son and I made a few videos and sewed them together when we removed the intake and rewired the pump. Just an FYI, maybe it’ll help someone else. Thanks for all the help!
Removing the air intake & rewiring the SAI pump
Removing the air intake & rewiring the SAI pump
LOL at the fact that you threw my hair dryer comment in there...
#38
Interesting. Learn something every day. Wonder if that change was made at the same time they started putting the varioram casting on the top.