Supercharger Install finished! Feel like I'm driving a beast! (Better pics this time)
03-19-2004, 12:13 AM
#62
Rennlist Member
BEAUTIFUL, INSTALL---- WAY COOL. So does your heater still work? Compared to stock, how well? Between MN and CO I've gotta have heat! I to would like info on your installer as this is turning into a must have 
03-19-2004, 06:14 PM
#65
Lifetime Rennlist
Member
Sachin
If you are taking it over to the Exchange, let us know. I'd like to see it up close and personal.
Also, see if Shawn Young, a salesman, is there. He's quite active in PCA and a great guy.
Have fun with it. (Will that involve the track?)
If you are taking it over to the Exchange, let us know. I'd like to see it up close and personal.
Also, see if Shawn Young, a salesman, is there. He's quite active in PCA and a great guy.
Have fun with it. (Will that involve the track?)
03-19-2004, 07:30 PM
#66
Addict
Rennlist Member
Rennlist Member
Thread Starter
Heater works great. It doesn't blow hot air as quickly, but when it's warmed up its fine. Still less time than a water cooled engine!
Originally posted by PD2FLY
BEAUTIFUL, INSTALL---- WAY COOL. So does your heater still work? Compared to stock, how well? Between MN and CO I've gotta have heat! I to would like info on your installer as this is turning into a must have
BEAUTIFUL, INSTALL---- WAY COOL. So does your heater still work? Compared to stock, how well? Between MN and CO I've gotta have heat! I to would like info on your installer as this is turning into a must have
03-19-2004, 07:31 PM
#67
Addict
Rennlist Member
Rennlist Member
Thread Starter
Re: Filter Cover
Nate,
The filter guard is actually a piece from a Ducati bike. Don't know what the PN is but I'm sure if you walk into a Ducati dealer with a pic, they'll know exactly what it is.
The filter guard is actually a piece from a Ducati bike. Don't know what the PN is but I'm sure if you walk into a Ducati dealer with a pic, they'll know exactly what it is.
Originally posted by nateweiss
Nice Filter cover/guard!
Where can I order one???
Nice Filter cover/guard!
Where can I order one???
03-19-2004, 07:34 PM
#68
Addict
Rennlist Member
Rennlist Member
Thread Starter
Install was done by Euroquipe . These guys are very good. and would recommend them to anyone. They have templates of every bracket they had to fabricate and they make sure its done right the first time.
Originally posted by PD2FLY
Sachin, WAY-COOL!! Question: Hows your heater working with out the blower? And, I too need to know, who did the install?
Sachin, WAY-COOL!! Question: Hows your heater working with out the blower? And, I too need to know, who did the install?
03-19-2004, 07:36 PM
#69
Addict
Rennlist Member
Rennlist Member
Thread Starter
Mike,
I'll give them a call this week. And yes, the track is is very much in the future. Probably Gingerman, as it's the safest for beginners like me. I think the Euroquipe guys are trying to sponsor a day in May. I'll keep you posted.
I'll give them a call this week. And yes, the track is is very much in the future. Probably Gingerman, as it's the safest for beginners like me. I think the Euroquipe guys are trying to sponsor a day in May. I'll keep you posted.
Originally posted by Mike in Chi
Sachin
If you are taking it over to the Exchange, let us know. I'd like to see it up close and personal.
Also, see if Shawn Young, a salesman, is there. He's quite active in PCA and a great guy.
Have fun with it. (Will that involve the track?)
Sachin
If you are taking it over to the Exchange, let us know. I'd like to see it up close and personal.
Also, see if Shawn Young, a salesman, is there. He's quite active in PCA and a great guy.
Have fun with it. (Will that involve the track?)
03-19-2004, 09:12 PM
#70
Lifetime Rennlist
Member
Putnam is wide open as well except for one turn.
If you don't press too hard, you'd be fine at Blackhawk also.
Finally, that engine bay looks sweet.
If you don't press too hard, you'd be fine at Blackhawk also.
Finally, that engine bay looks sweet.
03-23-2004, 01:56 AM
#71
Addict
Rennlist Member
Rennlist Member
Thread Starter
Originally posted by Richard
Sachin, welcome to the TPC club. Funny, I do not know anyone unhappy with the TPC set up. I see you didn't go the GT3 injector route, but if it works IT WORKS!! Go for it !!
One question: Yours is a 1996 car. Did that mean you had to fit the earlier throttle body ?
Sachin, welcome to the TPC club. Funny, I do not know anyone unhappy with the TPC set up. I see you didn't go the GT3 injector route, but if it works IT WORKS!! Go for it !!
One question: Yours is a 1996 car. Did that mean you had to fit the earlier throttle body ?
08-16-2004, 09:47 PM
#72
Three Wheelin'
Sachin,
Thanks for your efforts for the quest to more power. Great pictures! Top notch install! I too will have Euroquipe, of St. Charles, IL do my 1996 C2 early October. I will be picking up my SC kit this Saturday from TPC. I am ready and can't wait. My car is also areana red.
Thanks for your efforts for the quest to more power. Great pictures! Top notch install! I too will have Euroquipe, of St. Charles, IL do my 1996 C2 early October. I will be picking up my SC kit this Saturday from TPC. I am ready and can't wait. My car is also areana red.
08-17-2004, 10:51 AM
#74
Pro
Join Date: Jan 2004
Location: NYC
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
WHo makes just the charger? Why would I need toi buy a 9000 kit when the charger is around $3000K? What did the kit include? Why cant I substitute my own parts for better performance, especially since the kit does not get rid of ECU errors.
