Hard to choose 993 exhaust tips...input...
#18
Burning Brakes
I have Fabspeed wide ovals on my car too. I like them, they're good quality.
Brightness cranked up on the first picture so that you can see the inside of them.
Brightness cranked up on the first picture so that you can see the inside of them.
#19
These are great tips and very cost friendly. Great alternative.
#20
I purchased the Fabspeed oval in brushed alu with black inner powder coding. They looked great initially but I do have some quality issues with them. Only after a few good drives, the inner black powder coating wore off. Fabspeed did replace them with a set of new one as they said they have never seen this happen. Unfortunately, the second pair had the same problem. I voice my quality concerns with them, but they would not take them back. Had I known that, I probably would not have bought them. Just my 2 cents.
BTW, has anyone else experienced that with their Fabspeed ovals. Here are few pictures.
BTW, has anyone else experienced that with their Fabspeed ovals. Here are few pictures.
#22
Rennlist Member
Mine came off as well inside. Is this a quality issue? Mine were installed in July. I had my mechanic install these as he is a Fabspeed Dealer. He ordered them directly through Fabspeed.
#24
Powder coat will not stand up to exhaust temps. Needs to be ceramic coat. Fabspeed should know better.
#25
Racer
FWIW, I bought the FVD tips because to my eye they look very similar to the factory wide ovals, and they are of dual wall construction. At the time, factory wide ovals were much more expensive.
I'm not fond of the way that the fabspeed tips are constructed.
I'm not fond of the way that the fabspeed tips are constructed.
#27
Rennlist Member
Thread Starter
Thanks for the help guys ! Ordered a members oem Wide ovals
#28
Rennlist Member