Cargraphic Valve Control Unit
#346
Installed mine today. Big “Tip of the Hat” to 22992 and shrimp money for install instructions with photos and TPLM3 for install video tutorial on YouTube. Quick Jack made it quite easy to work in engine bay and underneath…..back and forth.
Last edited by Fullyield; 05-11-2023 at 01:11 PM.
The following users liked this post:
shrimp money (05-11-2023)
#347
Race Car
We are still waiting on our rebate checks.
#348
Spent 3 hours today driving the car with the kit installed!! LOVE IT!!
#349
Getting it installed tomorrow morning, I just want to be able to start the car up with the valves fully open. It's really silly that this is restricted on a sports car honestly.
This will be the last mod I think (until the next one haha). Kept it simple, clear markers, tint, gt3 side skirts and now the valve control unit.
This will be the last mod I think (until the next one haha). Kept it simple, clear markers, tint, gt3 side skirts and now the valve control unit.
#350
Getting it installed tomorrow morning, I just want to be able to start the car up with the valves fully open. It's really silly that this is restricted on a sports car honestly.
This will be the last mod I think (until the next one haha). Kept it simple, clear markers, tint, gt3 side skirts and now the valve control unit.
This will be the last mod I think (until the next one haha). Kept it simple, clear markers, tint, gt3 side skirts and now the valve control unit.
The following users liked this post:
tourenwagen (05-13-2023)
#351
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Hey all, I wanted to post a video we did recently on a 992 Carrera with the Cargraphic Valve Control Unit. We also show step by step the install instructions. While installing we developed a non-invasive controller mount for the Cargraphic unit to make install easier and eliminate the need to cut or drill anything. We ship these free when ordering through us. If you already ordered from us, just email info@flat6motorsports.com and we'll ship one out to you.
__________________
Flat 6 Motorsports
Porsche Aftermarket Specialists
www.flat6motorsports.com
Instagram / Facebook / YouTube
Flat 6 Motorsports
Porsche Aftermarket Specialists
www.flat6motorsports.com
Instagram / Facebook / YouTube
The following 11 users liked this post by Flat6Motorsports:
355Shawn (05-13-2023),
AdamIsAdam (05-12-2023),
Char1982 (05-20-2023),
Diablo Dude (06-01-2023),
DocM (05-14-2023),
and 6 others liked this post.
#352
Thank you Jon for another great installation video. Mount is a great idea and your location should have less heat soak than alternative mounting locations.
The following users liked this post:
Flat6Motorsports (05-12-2023)
The following users liked this post:
iso87 (05-16-2023)
#354
Rennlist Member
Join Date: Sep 2011
Location: Long Island, NY; South Florida
Posts: 4,114
Received 4,075 Likes
on
1,769 Posts
That video is super informative. Also the best example of stock exhaust valves opening and closing as it launched. You can hear the stupid valves open and close. Then compare to Cargraphic opened valves.
I'm happy to support them.
I'm happy to support them.
The following 2 users liked this post by AdamIsAdam:
Flat6Motorsports (05-12-2023),
tourenwagen (05-13-2023)
#355
Race Car
#356
Flat 6 mount looks cool. Alternator cover is $19.00 at my local dealer for those concerned about drilling into it.
#357
I ordered from flat6, I'm getting the mount!!
The following users liked this post:
Flat6Motorsports (05-14-2023)
#358
Not concerned at all about the alternator cover which is a good solution for install without a mount. If drilling is a concern, just zip tie it. But I think the location of the Flat 6 mount is an area with less heat so better overall for the electronics in the box.
The following users liked this post:
AdamIsAdam (05-13-2023)
#359
Race Car
That's a nice video, but I'd like to know why he's assuming the gender of the plugs.
#360