Cargraphic Valve Control Unit
#331
Rennlist Member
I have to say...I've put about 310 miles on Athena after the simultaneous install of the JCR valved exhaust and Cargraphic valve control, and I was able to drive her today all by myself with the top down. Wow. It's gotten to the point where I feel like a kid again every time I get in the car, like I've found something as an adult(some may argue) that makes me as happy as I was as a kid chasing bubbles. The sound is amazing to me now...I can't even imagine what it'll be like WOT to redline. I was planning to follow break in protocol by the book, but all bets are off for rn. What a treat.
Last edited by Shogunade; 05-04-2023 at 09:52 PM.
The following 3 users liked this post by Shogunade:
#332
has anyone here had their dealer install it and can recall how much labor time was charged ?
Thank you !
Thank you !
#333
Race Director
Just finished installed the module. It makes a HUGE difference in sound and I highly recommend it. Shout to @TPLSM3 for the video tutorial. One key thing to remember, as others have pointed out, is that the gray locking clip needs to not only be pull out, but then needs to be pressed in to release the plug.
Also, while taking the car out for a quick joyride, I got a message saying "reduced engine power, driving permitted, visit workshop". I promptly pulled over and turned the car off and powered it back on. I did not have this issue again for the rest of the ~10 minutes of driving. Has this happened to anyone else? I was toggling the valve controller on and off quite a bit. Could that have caused this message to appear?
One potential cause - I didn't fully tighten coolant cap, it was about a half turn too loose. Not sure if this had anything to do with it
Also, while taking the car out for a quick joyride, I got a message saying "reduced engine power, driving permitted, visit workshop". I promptly pulled over and turned the car off and powered it back on. I did not have this issue again for the rest of the ~10 minutes of driving. Has this happened to anyone else? I was toggling the valve controller on and off quite a bit. Could that have caused this message to appear?
One potential cause - I didn't fully tighten coolant cap, it was about a half turn too loose. Not sure if this had anything to do with it
#334
Race Car
#335
My head isn't too big @shrimp money . Thanks for the info. the cargraphic controller arrivers tomorrow! likely will install this weekend !
The following users liked this post:
shrimp money (05-09-2023)
#336
Three Wheelin'
I was going to wait for a tune after my T was broken in but you guys are swaying me. How much and who do we buy the controller from?!
The following users liked this post:
SupremePower (05-09-2023)
#337
#338
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
__________________
SupremePOWER Inc
1562 Kimberly Ave - Fullerton CA 92831
Contact: sales@supremepower.com - Shop# (714)632-1951
World's Largest Retailer/Distributor of BBS Motorsport & Street Wheels from 2015-2023
Huge Inventory: BBS, Kline, Brembo, Soul, Recaro, KW, Akrapovic & 200+ brands. Installation available
** Retail & Wholesale ** Global Delivery ** We match/beat any authorized dealer's price **
SupremePower.com // SupremeForged.com // Follow SupremePower on IG
SupremePOWER Inc
1562 Kimberly Ave - Fullerton CA 92831
Contact: sales@supremepower.com - Shop# (714)632-1951
World's Largest Retailer/Distributor of BBS Motorsport & Street Wheels from 2015-2023
Huge Inventory: BBS, Kline, Brembo, Soul, Recaro, KW, Akrapovic & 200+ brands. Installation available
** Retail & Wholesale ** Global Delivery ** We match/beat any authorized dealer's price **
SupremePower.com // SupremeForged.com // Follow SupremePower on IG
The following 2 users liked this post by SupremePower:
shrimp money (05-09-2023),
tourenwagen (05-10-2023)
#339
Race Car
My head isn't too big @shrimp money . Thanks for the info. the cargraphic controller arrivers tomorrow! likely will install this weekend !
#340
Three Wheelin'
I did my whole exhaust install using them
The following 4 users liked this post by tourenwagen:
#341
Instructor
Get yourself a set of these for $50 off Amazon: https://www.amazon.com/RhinoGear-119...3685824&sr=8-4
I did my whole exhaust install using them
I did my whole exhaust install using them
These are exactly the ones I have and used for my valve controller install. Even got my fat head underneath.
The following users liked this post:
tourenwagen (05-10-2023)
#343
Installed my kit today. I would say get the ramps!! I have a big head and that was a tight fit. What does the second remote with no buttons do?? I didn't receive a manual. thanks E
#344
Race Car
#345
Remotes should be identical. There is a slider that covers the buttons. Slide it down to reveal.