Dundon Motorsports 992 GT3 Development Thread
#32
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
__________________
Dundon Motorsports
Gig Harbor, WA
253-200-4454
jamie@dundonmotorsports.com
www.dundonmotorsports.com
Facebook.com/dundonmotorsports
Instagram @dundon_motorsports
Dundon Motorsports
Gig Harbor, WA
253-200-4454
jamie@dundonmotorsports.com
www.dundonmotorsports.com
Facebook.com/dundonmotorsports
Instagram @dundon_motorsports
#33
The following users liked this post:
rosenbergendo (06-01-2022)
#35
Rennlist Member
Are you alluding to reduced scavenging because of that expansion? And is that why the OPFs won't work with your 991 quiet muffler (from a performance standpoint)? Since OEM still makes good power, I wonder if a muffler could be engineered that is a bit quieter and still plays nice with the OPFs?
#36
On a related note I called Dundon about this yesterday and they were beyond accommodating with answering all my questions. Really nice guys who seem well versed in our crazy world!
The following 3 users liked this post by rosenbergendo:
#37
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Are you alluding to reduced scavenging because of that expansion? And is that why the OPFs won't work with your 991 quiet muffler (from a performance standpoint)? Since OEM still makes good power, I wonder if a muffler could be engineered that is a bit quieter and still plays nice with the OPFs?
We do have a quiet muffler system that works with the stock headers/OPF's. This system + Nurburgring tips is what Bohica Racing ran on their 992 GT3 with success at Mont Tremblant (with a 92dB limit).
Here's the link to the 992 Cat-Back with the Quiet Muffler: https://www.dundonmotorsports.com/pr...41074697273519
Thanks @rosenbergendo Appreciate the chat yesterday and the kind words!
Let me know if you have any other questions!
__________________
--
Ted Anthony
Sales & Marketing Manager
Ted@dundonmotorsports.com
Dundon Motorsports
+1.253.200.4454
www.dundonmotorsports.com
--
Ted Anthony
Sales & Marketing Manager
Ted@dundonmotorsports.com
Dundon Motorsports
+1.253.200.4454
www.dundonmotorsports.com
#38
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Most recent updated was added to the second post in the thread! I'll have another post up shortly with some data and video sharing the gains we've made.
The following users liked this post:
lockie (11-03-2022)
#39
So is this the exact product for the 478 WHP gains on the car ? Just to be sure. To my eye they don't look the same but can you verify this is the exact product ?
https://www.dundonmotorsports.com/pr...non-eu-version
Would the inconnel crack pipe produce more/less/same results rather then a muffler set up ?
Also that dyno of 478 whp was with a PDK car. Would the manual produce closer to 485-490 whp with the mods ?
Finally is this the max we can expect from your research or can we expect intake changes or tuning solutions to bring the power to over 500 whp ?
I hope others have the same m questions I do ! Selling my R8 so might want to use some of the sales proceeds to make the 992 more fruity lol
https://www.dundonmotorsports.com/pr...non-eu-version
Would the inconnel crack pipe produce more/less/same results rather then a muffler set up ?
Also that dyno of 478 whp was with a PDK car. Would the manual produce closer to 485-490 whp with the mods ?
Finally is this the max we can expect from your research or can we expect intake changes or tuning solutions to bring the power to over 500 whp ?
I hope others have the same m questions I do ! Selling my R8 so might want to use some of the sales proceeds to make the 992 more fruity lol
Last edited by Tcomegna; 10-31-2022 at 09:48 PM.
#40
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
So is this the exact product for the 478 WHP gains on the car ? Just to be sure. To my eye they don't look the same but can you verify this is the exact product ?
https://www.dundonmotorsports.com/pr...non-eu-version
Would the inconnel crack pipe produce more/less/same results rather then a muffler set up ?
Also that dyno of 478 whp was with a PDK car. Would the manual produce closer to 485-490 whp with the mods ?
Finally is this the max we can expect from your research or can we expect intake changes or tuning solutions to being the power to over 500 whp ?
I hope others have the same m questions I do ! Selling my R8 so might want to use some of the sales proceeds to make the 992 more fruity lol
https://www.dundonmotorsports.com/pr...non-eu-version
Would the inconnel crack pipe produce more/less/same results rather then a muffler set up ?
Also that dyno of 478 whp was with a PDK car. Would the manual produce closer to 485-490 whp with the mods ?
Finally is this the max we can expect from your research or can we expect intake changes or tuning solutions to being the power to over 500 whp ?
I hope others have the same m questions I do ! Selling my R8 so might want to use some of the sales proceeds to make the 992 more fruity lol
So the production parts will likely make a few more ponies...
We tested a 100mm TB on the car and the 992 GT3 ecu put the kibosh on it. It will require a tune... Since it will require a tune we've pushed our 991/992 GT3 intake runner project up and will be working on that between now and the end of the year. We're using our already potent 991.2 Cup car with a motorsports ecu so we can ensure the physics of the parts are not impeded by torque limiters or the like from the ECU.
Manual cars will have a little more power yes as a little less frictional losses, but they also don't have the gearing the PDK cars have, so YMMV.
Mini crack will make a bit more, but is loud so be ready for that... Ultralight Ti muffler is the best sounding all around...
Will never say never on where we'll stop... Enlarged ITB's have been discussed, but more testing needed on the Cup with the intake runners first...
We have all of this in stock, best to jump on it before the Black Friday
#41
Thanks for the reply!!
So for max power, mini crack pipe and a manual Tranny technically will make the most power to the wheels and be the least amount of weight ?
Also I like the sounds of Black Friday and being patient for product to come 😂
So for max power, mini crack pipe and a manual Tranny technically will make the most power to the wheels and be the least amount of weight ?
Also I like the sounds of Black Friday and being patient for product to come 😂
#43
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Hey gang, got a couple of updates on the 992 project!
Our car had to leave to make way for the 781 GT4RS, but we were fortunate to partner with a local 992 owner to finalize development on a few other pieces.
First up, 992 GT3 adjustable sway bar end links! To our knowledge, we are the first folks on the market with these.
When we installed the MCS 3-way dampers on the car last year, we realized we had some pre-load in the sway bars because the stock end links are not adjustable. To fix that, we designed our own! We built these using the best rod-ends and spherical bearings in the industry (FK) alongside proper motorsport design concepts (like pinch bolts). When you remove the pre-load on the sway bars, you ensure the car remains balanced and predictable on the road and the track.
The most recent addition to the car is our Carbon Splitter. This rounds out our full aero package and turns the 992 GT3 into a proper track weapon. This kit makes 885lbs of downforce at 120mph!
We have some track testing coming up in the next few weeks, so we will update you with results from testing the whole package!
Our car had to leave to make way for the 781 GT4RS, but we were fortunate to partner with a local 992 owner to finalize development on a few other pieces.
First up, 992 GT3 adjustable sway bar end links! To our knowledge, we are the first folks on the market with these.
When we installed the MCS 3-way dampers on the car last year, we realized we had some pre-load in the sway bars because the stock end links are not adjustable. To fix that, we designed our own! We built these using the best rod-ends and spherical bearings in the industry (FK) alongside proper motorsport design concepts (like pinch bolts). When you remove the pre-load on the sway bars, you ensure the car remains balanced and predictable on the road and the track.
The most recent addition to the car is our Carbon Splitter. This rounds out our full aero package and turns the 992 GT3 into a proper track weapon. This kit makes 885lbs of downforce at 120mph!
We have some track testing coming up in the next few weeks, so we will update you with results from testing the whole package!
The following 2 users liked this post by Ted@dundonmotorsports:
Captain P (11-04-2023),
M-AlTerkait (03-04-2023)