What did you buy your 991 today thread
 

A little surprised there is not one of these... I'm 30 days into ownership and finally made some decisions on Mods.

Today:

Sport front lip Spoiler
Tech Art Rear diffuser
3rd radiator ket from Rennline (was 50 bucks less than Suncoast and free shipping)
3Piece bumper mesh grill in Black
LED Clear Markers
IPE F1 exhaust
scheduled for full front plus full quarter panel Exel clear

Considering the DC2 suspension hockus pockus

Great thread idea :thumbup:

I bought it insurance. And gas.

- Changed glove box and interior door lights to LEDs
- Clear LED front markers
- Full front end wrapped with Xpel
- Carbotech 1521 brake pads (Fr & R)

A couple kWh and a few therms. I'm still in winter storage. Will be -3 tomorrow. Hopefully driving by mid March.

About $1.27 in electricity through the trickle charger.

Today I bought a black, thin 991 GTS engine cover grill for my 991 GTS, which came with the standard 991S grill because I ordered mine with ducktail and Porsche used to only supply that with standard grill, although now they have shipped a GTS Rennsport Reunion Edition with duck and black grill, as detailed elsewhere.

Wish mine had come that way -- on the other hand, it's also nice to get something new after a year, so you keep the thrill alive. Helps keep the "gotta have a new and different car" thought from crossing my mind.

Next up: refinishing black GTS wheels to a lighter shade, and 380mm rotors, and rebadging to

P O R S C H E
..911 GTS

Whoa...mother load...

For mine (not necessarily bought today, but...)

Rennline front mesh grills
CTEK trickle charger
Front clear LED indicators
Rodifix Maxi Cosi booster seat
Frunk lid protector

Definitely went all in. Nice.

I bought my car a full tank of 93 octane gas today.

Not purchased today but recently... and pending installation tomorrow. :D

Cargraphic X-Pipe (used but new to me)
BMC Air Filters

Next Week: Rebadging rear to 'Porsche GTS'.

Future: Investigating DSC V2 Controller. We'll see.


Interesting, is this the rotor upgrade option available via Racing Brake?

Ja.

http://www.racingbrake.com/RB-Iron-R...por-irk-15.htm

Very nice... it looks quite interesting and have been waiting for someone to take the plunge.

Look forward to your review and pics... :thumbsup:

Clear LED corners. They look so much better than the standard yellow ones.

I filled mine with 97 Octane today, as I always do. Does this mean the fuel we are using in the UK is a higher grade to US or is it measured differently.

Yes.

Just like your... ummm... shift levers.

I realize this won't be to everyone's taste, but a friend of mine had this Cup car at his shop and I couldn't stop thinking about how cool the sponsorship decals looked on the tires so I had to track them down.

Again, you may not like it, but I think it looks awesome.


https://cimg9.ibsrv.net/gimg/rennlis...9982e2c47d.jpg


https://cimg0.ibsrv.net/gimg/rennlis...9ee4fec5b8.jpg


https://cimg1.ibsrv.net/gimg/rennlis...5213228e93.jpg


https://cimg2.ibsrv.net/gimg/rennlis...acb67d0533.jpg

How do you like the inferior LEDs"

Love the tire stickers!

The tire stickers actually look pretty nice... certainly a bit more low key than some others I've seen.

But please, please tell me you're not running Michelin stickers on the stock Pirelli P-Zeros. :eek:

Much better than the incandescent bulb. What's so ironic is that my vehicle has the interior Lighting Package option. I discovered the glove box and interior doors courtesy lights were not LEDs and didn't care for the yellow hue light. Here is a picture of the before and after converted light in the glove box.

I had the factory wheels and tires removed prior to delivery and the GT4 set installed. They are a perfect replacement provided you install a 10mm spacer in the front.

Please post pictures!

Edit: never mind, you already did.

https://cimg1.ibsrv.net/gimg/rennlis...0b792ab354.png

Got some Fabspeed chrome exhaust tips since I do not have PSE and I skipped the X51 install kit. The Porsche factory ones were $300 more than these.

2 years ago today I picked up my 2013 CPO C4S. :)


https://cimg2.ibsrv.net/gimg/rennlis...0873df2748.jpg

I also bought some new rubbers this week. :P

One year ago today (Valentines Day!) I ordered my current 991. (Arrived in early April.)

Installed the LED clear lights today... If anyone is on the fence... A.) do it and B.) get the LEDs. It is not a subtle difference. Pictures will not do this justice.

I wish I could always "gift" my GTS with ethanol-free gasoline............

:roflmao: Haha

8 quarts of mobile 1, a filter and a crush washer. =$85
2000 mile DIY break-in oil change = priceless

Grill came in yesterday! I set it in place atop the existing grill just to get a visual. Wow, it's gorgeous! Leaving town for a little R&R today, so I won't get to install it till next week. :( Spoiler alert: (get it?) This is going to look GREAT with ducktail and the black accent grill right beneath the ducktail.

Haven't gotten to any of this yet; been chasing the perfect color for the refinish. And I'm just too lazy to replace the letters -- meticulousness is not my forte. May take it to a bodyshop.

Updated Euro Maps and got Online Services software retrofitted. This enables the new Real Time traffic via INRIX. Pick up the car tomorrow and we'll see how it works. Apparently I'm the first guy in the Stuttgart area to get Real-time traffic added. It's a must here. Interested to see if INRIX is better than Waze.

Also did the Annual service with oil/filter change and both cabin air filters and two-year brake fluid flush.

Please paste before & after pics, preferably taken from the same angle. I'm on the fence about this mod...

:bigbye:

Got the car back today and am very impressed with the Aha App functionality in conjunction with Online Services. The real time traffic is light years ahead of the standard blue triangles we get in Europe. The Software Version was updated to 4.76. The map update looks cleaner.

As soon as I started the car and plugged in my iPhone to the glove box USB, Aha started on its own and showed a Porsche to Aha link and took about 30 seconds to connect and talk. It automatically toggled "Traffic Data" On in the Vehicle Settings page. Subsequent starts did not need the 30 second handshake.

Real time traffic displays almost immediately after starting the car and PCM recognizes the iPhone. From the source menu, just select Aha. The search function for POI is much easier and immediately interfaces with the Nav function so there is no more hunting and pecking to find a POI through the PCM Navi function. I have had a mount for my iPhone so I could see Waze as it was light years ahead of the traffic receiver prior to integrating online services and Aha. I don't think I need Waze anymore so this will clean up the cockpit immensely.

We streamed some 80s radio channels through Aha. We haven't had Satellite Radio for almost five years being overseas, so this is awesome to now have. Tons of channels, so I have some research to do.

I'll be figuring out more of the benefits of adding Online Services and Aha functionality in the next few weeks.

I should try Aha again... I had it installed but noticed that when driving it completely killed my phone battery. Like wiped out 50% in an hour of driving. Crazy.

Can anyone in the US/Canada confirm Real Time Traffic info works here via Aha?

Was it plugged into USB in the glove box? It has to be for Aha and PCM to talk to each other...you can't bluetooth it.

No, it was connected via Bluetooth and it did work no problems. I got the Aha/Porsche screen on my phone and was able to stream music from the (limited) selection of stations. I also got local weather info and some other stuff.

I cannot however recall if the RTT worked or not...

If you don't plug in via USB you will not get RTT. RTT just got released in the last few weeks over here, so you need to see your dealer to get the map update and install online services if you didn't get it as an option. If you have Sirius/XM traffic option and a subscription, you may get RTT, but someone in the US would have to confirm that. Bluetooth streaming and Waze killed my iPhone battery inside of 30 minutes so I always plug into USB which keeps you at 100% all day long.

replaced plastic key cover with carbon fiber...very cool...

Confirmed, I have Sirum/XM traffic and get real time updates. MUCH better than google or anything else I can pull up on my iPhone. This is almost a necessity in the DC area if you have business meetings during the day.

Getting my front Aerokit lip painted - should be ready sometime next week!

SPASM front spoiler.

Just ordered sport design steering wheel, blind spot driver's mirror and led interior light kit for my 2013 C4.

Bought mine an oil change and a Porsche software update

Had the four year service done today. New plugs, filters and IPD plenum, really woke up my car. An ear to ear grin. The air filters were very dirty and the plugs showed signs of equal wear and coloration. Also, should have my new Carrera Classics from Suncoast by Monday. The previous owner lived in a rough area of the North Bay and the original Classics took a beating. I also replaced both headers to do away with a dented pipe. And replaced the twin tips, that were tar burnt pretty bad, with a pair of stock used tips from a dealer back east for $200. They're in like new condition. I sent back the X51 Kit because of the mileage ($$$) restrictions. Bearings and such needed to be replaced if engine had over 25,000 miles. That was disappointing.

Next. A really good wax job this weekend and conditioning the leather.

I took mine out of winter hibernation. First drive since Nov 1.

Stuffed the symposer full of foam to get rid of the PSE howl/drone. Haven't driven it yet to check but looking forward to it tomorrow.

Black Zunnsport grills for. 991 C4s right and left front openings. Now I just need to clean up some laser jammer wiring and I can install the grills. Photos, etc. forthcoming.

Worked my wheels over: ONR, Tarminator, clay, Opti GlossCoat -- about 1.5 hrs per and about $9 in materials per wheel. I'm surprised how many chips in the wheels there are after just 8k miles, geesh. Getting out for a ride today, first since mid-October. Bam!

I just got service and it updated from 4.73 to 4.76 last week. What is your SWV?

Ordered magnetic Stone Guards from MagnaGrafik

xpel/CQuartz Finest :jumper:

https://cimg5.ibsrv.net/gimg/rennlis...621407ac15.jpg


https://cimg1.ibsrv.net/gimg/rennlis...6a6c27d8e1.jpg

https://cimg5.ibsrv.net/gimg/rennlis...d4865bd06a.jpg


Sorry for the junkie phone pics tho :cool:

Door sill light Porsche crest projector
 

Crazy I know, but for a bid of $19.99 it may be fun install/effect Just ordered.

http://www.ebay.com/itm/321687077422

About 5 months before i get my PTS Targa arrives, so in the meantime...


https://cimg6.ibsrv.net/gimg/rennlis...1a9aa388be.jpg

Bought weather tech floor mats and installed my Proclip phone mount. Clear LED side markers on their way also! Hope for an easy install with those. Have driven it everyday I could lately with the mild winter we are having!

Sport Spoiler Lip
Mobil 1 Oil Bag

I'm getting the front spoiler painted black and my brakes painted red as well when it all gets here!

I wonder if I'm going to win 'most unusual present'...

Have had my driver's seat stuffed with memory foam to provide more lumbar support and cushioning behind the knees. I have had a fair few back problems and the 4-way sports plus seats I have left me aching after long journeys and just never felt quite supportive enough.

I went up to Autotrim in Manchester and spent an hour driving around with different numbers of foam slabs in different places. Once I settled on a configuration they rebuilt the seat for me. I'll post some photos tomorrow if it's dry enough to put the top down, but Autotrim's workmanship was first rate. The seat looks like it came 'enhanced' from the factory - they cut and stitched in new bits of alcantara and everything.

Anyway, it now feels unbelievably good. Kind of like sitting on a very supportive cloud, or like the car is giving me a hug each time I get in it. Which is nice. I really do recommend Autotrim for anyone in the UK. I made a 300-mile round trip to see them (I know poor me, right?) and it was totally worth it. They do all kinds of interior repairs and replacements and also offered to sell me the yellow seat belts I wanted for way less than Porsche charge (sadly, those had already arrived at the dealer).

I do hope this RTT functionality via the phone will be introduced in the US

http://www.total911.com/real-time-tr...ew-pcm-system/

Does this grill have the area removed in the slats for the third brake light? Or are all the slats complete and the same?

on your profit picture. is that a vorsteiner v-gt 2 piece front splitter? its on my shopping list.

Unusual, yes - but very creative. Thanks for the idea (being a southern boy I'll have to demonstrate restraint to not attempt a duct tape solution) {we need a redneck emoticon}

(.)(.)

My record collection reveals a redneck heart...


Photos as promised

Spot the difference:

https://cimg2.ibsrv.net/gimg/rennlis...3717029cf2.jpg


Closer up:

https://cimg7.ibsrv.net/gimg/rennlis...796158cdeb.jpg


And for the fans of serious detail:

https://cimg9.ibsrv.net/gimg/rennlis...4394846ff5.jpg

I need to clean the car...

Which ones did you get? I forgot that I had placed an order with Dan, last week, for the regular, non glossy version.

And move the steering wheel to the correct side :evilgrin:

They build em like that for socialists.... we'll soon have them here to...:icon107:

Maybe look up 'Jeremy Corbyn' before becoming too worried about that...

I went with the Carbon Fiber look. You might call him to check on your order. I have not received them yet. Web site says they will ship in 3-5 business days. I finally got a hold of him after 2 emails and a phone call. He said he was backed up with orders so I will give him the benefit of doubt.

I thought about the CF, but he sent me a pic of the regular one on a GT3, and I liked the looks of it. I got the same song and dance yesterday, about being backed up, due to racing season orders. It's going to be over two weeks, by the time they get here next week. I was really hoping to have them for an event this weekend.

I'm getting a little concerned. Dan told me mine would ship two days ago. As far as I know it has not shipped. My credit card has not been billed yet. If not here next week I will cancel the order.

If not shipped by Monday, I'm getting these instead.

http://www.suncoastparts.com/product/991STONE.html

I'll have my PPF guy install them, and be done with it.

Bought and installed CF FOB side blades

It's magnetic and installation is simply placing them were you want... No?

Pioneer AVIC-8000NEX Stereo Upgrade
 

A few guys commented on my original post about my stereo upgrade that I was planning soon after purchasing my 911 GTS. I have attached photos of the job. Custom Car Stereo in Houston did a fabulous job of making it look as stock as possible. For less than the Burmester, I was able to get my new stereo plus a few extra goodies. Currently, I had my Pioneer AVIC-8000NEX that I had in my Cayman GTS installed in this car. I am driving the stock speakers with a JL Audio XD/600/6 that produces 600 W of power. It is amazing how much better they sound with a clean amp. I am driving my JL Audio TW5v2 13" subwoofer with JL Audio XD600/1v2 600 W for a total of 1,200 W. My Pioneer can play FLAC (192/24) and ALAC (48/24). I took pictures with the rear seats up and down. As you can see, it does not impair my view through my rear window. I do not notice the sub through my rear view mirror unless I try to look for it. I also had them install my Valentine 1 with a concealed module and Bluetooth dongle. When you run custom sweeps on the V1 and I am Beta-testing a new iPhone app for the V1, it cuts down unnecessary beeps to a minimum. I also had them install AL Priority "Parking Sensors". Sorry for the dusty image on the concealed ALP module.

Pioneer AVIC-8000NEX Stereo Upgrade
 

Sorry, if you want to see pictures, I have a same thread going in Water Cooled 991.

Dropped off the car at my tint/film guy earlier to install paint protection film on the rockers (replacing the stock film on the fenders) including behind the rear wheels. Also doing a light smoke film on the taillights at the same time. Should have it back late tonight or in the morning. :thumbsup:

The ones from Suncoast are not magnetic. Need a film person to install.

Bought her a frunk liner from Suncoast.

http://suncoastparts.com/product/SKU991FLCL.html

I cancelled my order today. Dan never shipped the Stone Guards like he promised. I will place an order with Suncoast. Thanks for the link

Attachment 1026116Yesterday I got a detail with two stage paint correction fro Concours Auto Salon in San Antonio. Today full frontal wrap!

Several cases of Mobil 1 5W-50 at $5.99/quart from NAPA.........

You're welcome. Mine didn't ship either, but I'm a sucker for small businesses, so I gave Dan a chance to deliver. He's a pleasant fellow to speak to, and is a Porsche guy like us. He promised it would get shipped today, with a tracking number, or they would be free.

Sport Mode by default modification today. Www.tdesign9.com A very simple r&r to fix a regulatory nuisance. I also installed the clear LED turnsignals from Suncoast. It's amazing that a few minutes of work can make me more happy with the happy car.

Tdesign9 is new to me. How easy was the install?

Its super easy. 5 minutes. No tools
see disassembling instructions here http://www.planet-9.com/981-diy-disc...r-console.html

washed the ol' girl with a new power washer :)

Attachment 1357017

X2Board, did Dan ship the SGs?. Just wondering if Dan came through on his promise? I hated having to cancel my order.

Yes, it was shipped yesterday. I'm hoping it will be here by Friday!

I bought my car 2 cases of Mobil 1.

Sport design front bumper and Rennline mesh grill cover.

The MagnaGrafik stone guards arrived today. They are not the same size as the OEM protection, but I just placed them over the OEM anyway. I just hope they don't blow off on the highway.

<a href="http://smg.photobucket.com/user/mcmitchell/media/Mobile%20Uploads/2016-03/C5853E6B-04FA-4802-8B1B-A835B018DD0D_zpsgfbemo1s.jpg.html" target="_blank"><img src="http://img.photobucket.com/albums/v316/mcmitchell/Mobile%20Uploads/2016-03/C5853E6B-04FA-4802-8B1B-A835B018DD0D_zpsgfbemo1s.jpg" border="0" alt=" photo C5853E6B-04FA-4802-8B1B-A835B018DD0D_zpsgfbemo1s.jpg"/></a>

<a href="http://smg.photobucket.com/user/mcmitchell/media/Mobile%20Uploads/2016-03/E164C7BB-DAD7-4F22-A82B-8867D0B96C21_zpsmvbhnmoc.jpg.html" target="_blank"><img src="http://img.photobucket.com/albums/v316/mcmitchell/Mobile%20Uploads/2016-03/E164C7BB-DAD7-4F22-A82B-8867D0B96C21_zpsmvbhnmoc.jpg" border="0" alt=" photo E164C7BB-DAD7-4F22-A82B-8867D0B96C21_zpsmvbhnmoc.jpg"/></a>

Attachment 1202316

Attachment 1202317

Attachment 1202318

^^^ This intrigues me. How do you use it? Just oil storage? Do you have one of their spouts, too?

Super easy 5-7 second install. T
http://t-design9.com/phone_mount_981.html

I have been using 1 Gallon jars for disposing the oil at my neighborhood auto parts store. I decided to invest in a real oil container that I know it won't come open in my trunk when transporting. I don't need the spout because this is for disposal only. I can fit up to 10 quarts of oil on this. Also, the big opening makes it easier for transferring from oil pan.

Very cool. Sure beats my kitty litter containers!

Inatalled some Porsche Chrome tips on my C4s w/o PSE. Also a road emergency triangle for the boot.
https://cimg5.ibsrv.net/gimg/rennlis...fdccd55f4.jpeg



https://cimg7.ibsrv.net/gimg/rennlis...a4600c56a.jpeg

Bought my car 3+ hours of expensive labor today... ie. me giving it a thorough top to bottom wash + quick detail. :D

Posted elsewhere but my wheels arrived this week too, Forgline GE1 in satin graphite. Had Opticoat Pro applied by my detailer and will have them mounted by end of March.

https://cimg9.ibsrv.net/gimg/rennlis...a7bbc2012a.jpg


Nice one, I've been considering that myself. Assume it the OEM Porsche part? On a related note I was trying to find the OEM Porsche first aid kit for the frunk but gave up. Not sure if it is still a factory item on 991's in Germany but would be interested if anyone has insight.

"Nice one, I've been considering that myself. Assume it the OEM Porsche"

Yes OEM from Suncoast. The carpet pulls back to expose two slots and holes for bolts to hold the brackets. Cut small slits and holes in the carpet and it is a cinch!

AWE wind foils. Like a new car with windows down. Buffeting a thing of the past.

Kline Exhaust
 

Finally a little Porsche noise....

Vise, I just love those wheels :thumbup:

You got a Kline! Sweet. More pics. Find a good deal?

Yellow belts for the front. Rears on the way, as is smokers' storage compartment (they managed to forget to install it this time...)


https://cimg3.ibsrv.net/gimg/rennlis...739cf31c1.jpeg



https://cimg5.ibsrv.net/gimg/rennlis...2acbc59bb.jpeg

AWE Tuning Porsche 991 SwitchPath™ Exhaust

ready to pick up monday!

You will love it. I have one on my GTS and its amazing.

Pls do post up, are you going to DIY? I am very interested in this exhaust also.

My car isn't here yet, but I ordered clear LED side markers and the RHO plate v2 mount for my front license plate.

having dealer do it as computer needs to be flashed to add the button to console Will let you know how it sounds when pick up...

Installed the clear LED sidelight.

clear LED side markers and a alcantara center console cover.

Installed Blackmill wind stoppers..

added a PSE to the buy list....gets installed next Tuesday. ;)

I had PSE before my AWE and if you like an aggressive exhaust, the PSE isn't it. PSE sounds super tame.

thank you but i don't want AWE but rather the OEM PSE kit....i've heard the AWE live and had PSE on my last Carrera 991 and absolutely loved it. keeping it stock was most important to me. ;)

Air filters!

https://www.fototime.com/9A0A01374EF4456/standard.jpg

https://www.fototime.com/07AC43EC3D36775/standard.jpg

https://www.fototime.com/91B87DD604717C6/standard.jpg

Did it make a difference?

BradB your car needs to stop smoking. It has black lung.

Do you live on a dirt road or something? After 40K mine were not that bad.

So off-roading is bad? ;) It looks worse in pictures, but I am glad I changed them. Car has only 11k miles.

I don't normally mod or add to my cars but this one...
SunTek Clear bra
Colored key fob
Magnetic iPhone mount
2 Sunglass holsters from T9 designs
Lloyds mats
Probable ALP laser shifters

Installed my painted aero splitter

Few more...

Did that this week too.

Just ordered mine up as well and set up install appointment for March 28th. The PSE was the only option I wish my CPO had on it and didn't, but got a good deal on the car and knew I could add this later, and later is now. ;-)

Who knew spending money could be this much fun!!!

So did you car come w/out PSE and you're adding the exhaust button to the center console to operate the AWE switchpath? Didn't know that was an option? How does AWE work with the sound symposium on the 991?

So how does the AWE compare to the PSE? Any drone? Fit/Finish? I had one on my 997.1 but that was a 2005 997 base. Liked it a lot though. PSE was on my last 997 C4S and liked it also. Decisions.

Congrats, Aspir8......nice get. :thumbup:

Installed my ultimatecupholder that arrived in the mail. It truly is the best cup holder for our cars, and as mine is my daily driver it had to have one. I forgot to remove my last one from the car prior to selling it. :crying:

Suncoast just listed these. Thoughts?

https://cimg5.ibsrv.net/gimg/rennlis...96613dd28f.png

http://www.suncoastparts.com/pdf/996997FFMOUNT.pdf

http://www.suncoastparts.com/product/FF199XTM.html

Nice job! Curious on how your jammers are mounted. Can you take close up pics and from underneath too? Thanks

Would have to drive a car with them installed to be able to have a better opinion but at $129 why not. It does read as though they add noise and vibration (" all while transmitting minimal added noise and vibration.") but maybe I'm not reading it right.

I've got them in the nifty but not required camp.

I noticed in the description and option selection (all 991 transmissions) that there isn't any mention of the dynamic engine mounts that SC provides. Makes me wonder how these work in conjunction with the SC mounts.

I'll be at my indy shop tomorrow, I'll ask them if they've seen any transmission sag.

:thumbup:

I had an expensive week...
Rennen R55

https://cimg3.ibsrv.net/gimg/rennlis...580187b9a.jpeg

And KW adjustable springs, both to be installed once the wheels are built.


https://cimg5.ibsrv.net/gimg/rennlis...fb7a19950.jpeg

Sexy. Post pics

3 versions.


https://cimg1.ibsrv.net/gimg/rennlis...10a876d8b.jpeg

https://cimg2.ibsrv.net/gimg/rennlis...cefc6b156.jpeg

http://www.function-first.com/produc...s-mount-insert

Gee, I didn't think my car felt numb, sloppy or imprecise. :( I'd be interested to hear some feedback from folks that buy this.

^ kinda what i thought.....after how many decades of building 911s and now they need those things? hmmm..... :corn:

Clear LED reflectors. I can't wait to install them because they look so much better than the orange ones.

I installed my track wheels with new MPSS tires, installed new OEM rotors and FVD stainless brake lines.

https://www.fototime.com/4C00F83192118DE/standard.jpg

https://www.fototime.com/75CA03A5755C34D/standard.jpg

https://www.fototime.com/AD99C06F104B418/standard.jpg

https://www.fototime.com/82B1C620EA7CFBF/standard.jpg

https://www.fototime.com/321CAA334471F6C/standard.jpg

Brad,

Tell us more about the lift you're using.

DaveGee

I have to say this little guy is pretty awesome.

LEDs are nice, but I can't get over the fact that someone actually has GLOVES in their glovebox :bowdown:

A Bend Pak 6000lb Mid Rise. Wonderful tool.

https://www.fototime.com/60C3BA457EEB90F/standard.jpg

Love that illuminated Porsche sign in your garage. Where did you get it from?

I've seen those on ebay occasionally from China. Always wanted to get one too

smartTop
 

Bought a smartTop for my new to me 991.1 cabriolet. Just in time for spring. For anyone interested, Pelican parts (no affiliation) seems to have the best price for it. I went through their entire vendor list.

Where do you install the cup holder? On the driver or passenger side footwell?

bdschet - Do you plan on doing the install yourself?

Yep, I had one on my 997 that I just traded in. Literally took less than 10 minutes to install. One of my favorite mods for the cabriolet. Wish the features were just standard...

We use the "Ultimate Cup Holders" all the time in older P cars and BMWs... Great location

Thanks. It's made by a guy in Las Vegas. Great quality, very well made. You can designate where you want the switch and cord to be located. He makes them for many brands. Shipping and packing is excellent. Contact Ron. signguylv@hotmail.com He has products on eBay. You can find more info there.

https://www.fototime.com/F67268A72D8EED7/standard.jpg

Bought my 991 GTS a spa treatment package:

Gilmour Foammaster Gun
Chemical Guys Max Suds II
Grit Gaurd 2 bucket system
Sheepskin mitt
P21S Wheel gel cleaner
3 pack of Wheel Woolies
P21S Paint Cleanser
P21S 100% carnauba wax
Griot's garage glass cleaner
Griot's garage Speed Shine
Various MF cloths

Here is the finished result :burnout:

Nice! Looks great!

Looks great. Now, by the looks of the items on the ground behind your GTS, you've got some more work to do!! ;-)

Shiny! :thumbsup:

Well I put off the Spring yard work for another day. Instead I applied a second application of Carnauba wax :thumbsup:

Thanks Porsche_nuts and Reuben :cheers:

Picked up some BMC air filters...

https://cimg8.ibsrv.net/gimg/rennlis...c9b6ca8084.jpg


I de-tinted yesterday.

I bought the car in Utah, and it had very dark tint on the back 3 windows, and about 30% on the sides. It was a little much for Minnesota (and illegal, not that I cared much).

Pretty psyched about going to a more stock look.

SmartTop purchased, cant wait!

Couple of ?s:

1) Does that BendPak just store flat--can it simply be stored under your car?

2) You mean our 991's don't have stainless braided lines as standard?

^^^^ You can keep your car parked over Bendpak.

Correct, Dr...as you say. Helps keep the container much more still and secure than the oem ones. You can see pics on their website.

I wish I never saw the BendPak lift....what a great tool to have. :thumbup:

Escort Passport Max360.
Blendmount
HardTap (to wire rader to fusebox)

Though I've bought several items for the car (fusion dock, cup holders, tires, etc.) I just made my most fun purchase. Number stickers for the track - now THAT'S exciting :cool:

It is :thumbsup:

1)replaced my tailpipe trim to a sharkwerks slash cut item
2)replaced the seat belts for a set in yellow
3)also the clocks, now read mph and are yellow.

Just waiting for my rs steering wheel to arrive and my new pccb brake setup.

Exhaust tip
Attachment 1202141

Clocks
Attachment 1202142

Yellow belts
Attachment 1202143

Just been cleaned and laid out to dry.

Also had a minion on my head for my lads birthday
Attachment 1202144

Carl

Posted elsewhere earlier... not purchased today but finally mounted this morning. Forgeline GE1 in satin graphite finish. More pics to come. :thumbsup:

https://cimg6.ibsrv.net/gimg/rennlis...742e2af73d.jpg

T-design iPhone holder. Like how,it mounts higher up....and sturdy enough. Installation/removal takes a second. Smart design, wish they were offered for a Cayenne too.

SmartTop
T-design iPhone 6 holder.

Replaced "PORSCHE 911 Carrera GTS" badge to "PORSCHE GTS"
Clear LED side markers
Frunk Liner
Hood protector

Looking into Smart Top.

Hey Oalvaez, with the T-Design iPhone holder installed (assuming you placed it to the right of the PCM?), can you still use the driver cup holder or does that block it?

Thanks

Depending on how high you place it, it blocks the cup holder. I'm able to place mine low enough to use the cup holder; however, you need to make sure the drink will not produce a lot of condensation to prevent it from dripping on your phone.

Perfect, thanks DrCGuerra

I bought it a track day at NCM Motorsports Park in Bowling a Green, KY.

https://www.fototime.com/72F7AC3E632122B/standard.jpg

Took mine to brands hatch race circuit today and emptied the fuel tank in no time, also got my rave licence.

Carl

Is the frunk liner secure. I was concerned about it rattling

Thanks

i use a "ultimate cupholder" which uses the side of the console and floorboard to lend support as i find the oem cupholders to be on the flimsy side. ;)

Today I ordered my 991 GTS:

1) T-Design phone holder
2) A pair of Ultimate Cupholders

Although I don't drink coffee in my car on the way to the office, I will be doing some long road trips, so I need to be prepared!

Thanks for the suggestion Oalvarez :-)

you betcha! :bigbye:

Beautiful looking. Love the cheeky Rho-Plate. I'm going to order mine soon. Waiting for my personalized plates to arrive :-)

Perfect fit....no rattles.

I will let you know when I receive it from Suncoast.

Brian, I have the hood protector, but not frunk liner. Let me know if it reduces space in any meaningful way. Thx brah!

This was my concern as well but after getting rained on at AX I knew I needed a removable bin to stache my wife's sandwiches and snacks. I will PM you and Larry about this weekend. :/

I was thinking the same thing. Does it reduce space much


Thanks

The Ultimate Cupholders arrived.

The photo is portrait, no idea why Rennlist flipped it!

Yes they are secure. And about 1/3 the size in that picture above. That's the 997 liner. The 991 are much smaller. From Das Schield.

Sorry if I missed it. Where do you get the cup holders?

http://www.ultimatecupholders.com/

Thanks. Just ordered a pair.

It's arrived, an rs steering wheel. All the way over the pond from you guys.

Attachment 1202098

Carl

Fast D: about an inch reduction on all sides at its thickest which is around the top rim. But it tapers down quickly and is flush with the sides at the bottom. I really like it. Very secure to the point where I thought they had sent me the incorrect part as it was difficult to get it into place. Here are some pics.

Just ordered this to protect my painted CL wheels. Hoping they are unobtrusive and efficacious.

http://wheelbands.com

Are these installed with double sided tape? Any picts of the finished product?

Exhaust Tips (Thanks 77Tony)
 

Many months ago Tony put up for sale a pair of aftermarket exhaust tips, then he found Gudrun and decided to wait to see if he wanted to keep the GTS black tips or swap out. He decided to stay with the black tips so I benefited from a good deal. They arrived over the weekend and I got them installed today. Look to be very good quality - and I don't know the offshore source (Tony?). Installation was 5 minutes with a 12-point ⅜ socket (and some help from a rubber mallet). Then another 20-25 minutes fussing with adjusting the tips relative to the car and to each other. Worth it in the end. Thanks Tony!

Here are a couple of pics with the old ones resting on the plastic bubble wrap - sorry, I forgot to snap a "before" shot. ghl


https://cimg5.ibsrv.net/gimg/rennlis...0f5737940c.jpg

https://cimg6.ibsrv.net/gimg/rennlis...d61c884b3c.jpg

This

[QUOTE=beaverlake;13251920]Many months ago Tony put up for sale a pair of aftermarket exhaust tips, then he found Gudrun and decided to wait to see if he wanted to keep the GTS black tips or swap out. He decided to stay with the black tips so I benefited from a good deal. They arrived over the weekend and I got them installed today. Look to be very good quality - and I don't know the offshore source (Tony?). Installation was 5 minutes with a 12-point ⅜ socket (and some help from a rubber mallet). Then another 20-25 minutes fussing with adjusting the tips relative to the car and to each other. Worth it in the end. Thanks Tony!

Here are a couple of pics with the old ones resting on the plastic bubble wrap - sorry, I forgot to snap a "before" shot. ghl

Reply: Look great Gordon :thumbup: Almost kept those double wall tips and had powedercoated black. IMHO nicer to look at and beefier than the stock tips. Gave all reciepts to new owner of the 50th, maybe he will chime in on where to source them. T

^^^ Yes, please, we want to know where those tips came from! They look great!

Do the bigger tips make it significantly louder, or is it more a visual thing?

Wow! Super cool. I'd love to know if this is a straight swap for a standard Sport steering wheel with paddles. Expensive with the airbag? Source?

Thanks!
Alec

Blendmount installed with Escort Max 360. The first Blendmount did not have enough vertical adjustment. They shipped a replacement extension section. If you order one, make sure you let them know that you need the longer extension, otherwise the radar will be jammed against the mirror and even then not horizontal! Looks good now. Just got to get it wired to the fusebox :-)

VBOX Sport. I can't wait to try it out at TWS in 2-weeks.

Tell me more; what is the VBOX Sport all about, also TWS??

Taken from VBOX Motorsports website, the VBOX Sport is "A light-weight, portable data logger that can be used in any vehicle and environment to measure performance or lap times".

http://www.vboxmotorsport.com/images...apTimerApp.jpg

Here's a great thread to read about it from FergusH:

https://rennlist.com/forums/data-acq...precision.html

TWS is Texas World Speedway. TWS is one of only seven Super Speedways in the USA and is the only Super Speedway in the Southwest. TWS's oval became known as "The World's Fastest Speedway" when Mario Andretti set a world closed course speed record of 214.158 mph on October 6, 1973 while qualifying for an Indy car race. Many clubs track their cars there. It will be my first time at this course. Everyone that has tracked their cars there have raved about it. The track needs repair and many rumors about its closing so I am trying to get out there before that happens.

Cheers for the info. Looks like a nifty device! Enjoy the TWS track.

Okay we need to know if this works straight up retrofit on a 991 or not! Please fill us in. I see Suncoast is now noting on their site that folks are ordering these to retrofit and adding a disclaimer that if they don't work then they may not be returned. So info please.

Rob

PS..oh yeah I pulled the trigger in motion for a new exhaust. Loved the Akra but my wife vetoed that idea and got an AWE instead. The Art of the Deal and staying married! LOL :thumbup:

I got them for the look - but I recall reading that some folks thought the shape did slightly change the sound. I kinda doubt it, but I'll put the top down tomorrow and see if I notice any difference.

Clocks
Attachment 1202022

Hi Mechanicalrepair,
I also plan to exchange the instrument dials. Do you have some DIY guidelines? Or do you take it to a garage?

No more spots
 

Griot's portable water deionizer.

Because black car and well water don't mix.
https://cimg7.ibsrv.net/gimg/rennlis...a4bc801006.jpg

Regarding any impact on exhaust sound as a result of changing exhaust tips: It's hard to separate a "placebo effect" from reality, but I think that the new exhaust tips didn't have much impact on the sound. If they did, and this is of course highly subjective (with the top down) - the effect was a bit more mellow sound, a little less raspy. I'm not sure if that 's a good thing or not. In any case, the impact, if anything good or bad, is far outweighed by the appearance.

g

I'm seeing Suncoast offering this wheel with an orange marker. Does anyone offer it in yellow?

Just popped in a Mods4Cars SmartTop module for my Targa.

Great little mod. Easy install....took about a half hour. Now I can raise or lower top with a single button click from inside the car (leaving windows up at the end), double click (to leave windows down), or via the key fob (3 clicks of unlock to leave windows up....or 4 clicks of unlock to leave windows down).

Works like a champ!!!

It's a direct swop, literally takes ten minutes to do.


Carl

My baby's first diaper change!
 

Rennline tow hook & GoPro mount. I hope to get some great video at TWS the next few days.

Some touch up paint and a proclip phone mount. I know benign but useful.

Well, didn't buy these today, but recently. 19" Porsche Sport Classic wheels. Had them refinished with polished spokes. Love.

Alec

Sorry for stating the obvious but those are really nice especially with the stripe.

What wheel did you come from? How much and any other parts needed?

Finally picked it up today, if all goes according to plan will be installing tomorrow. :D

https://cimg2.ibsrv.net/gimg/rennlis...35d77d09de.jpg

Looking good. I'll have to get one of those oil jugs with the spout.
What's the 1/4" tubing for?

Do you retain the multi-functionality of the buttons from the OEM wheel with the new 991.2 multifxn one? Or do you need a stalk added like with the Sport Design retrofit?

Yeah let us know about how that goes too! Interested in how it compares with GIAC and others.

sent in my really, really old V1 for the latest

http://www.valentine1.com/

Looking forward to your review. What map are you installing, 0 or 1?

Upgraded the keys to match our Racing Yellow. GTS.
Factory option - 500 per key
Suncoast - 120 per key
eBay - $28 for 2 sets! OEM parts too!

Had the ALP jammers and the Navtv installed on the rear.

Detailing supplies!
And picked the worst day to wash it, rained 2 hours after I was done.

https://cimg7.ibsrv.net/gimg/rennlis...092ffc8d97.jpg

https://cimg2.ibsrv.net/gimg/rennlis...be3e0574fb.jpg

https://cimg7.ibsrv.net/gimg/rennlis...c8571b1596.jpg

How old was your V1 and what are the upgrade benefits?

My was very early generation, approximately 1997, it had the old taller case. A ton of upgrades since, they don't upgrade that old of a unit, they sell you the latest at a discount. It was 289.

Great info. Thanks. Certainly money well spent :burnout:

https://cimg6.ibsrv.net/gimg/rennlis...f4187893b.jpeg

The Porsche Carrera lettering!!!

Here's a better picture of letters....http://www.customgaragedecor.com/

Thanks Gary!

https://cimg3.ibsrv.net/gimg/rennlis...d1e2e6459.jpeg

Upgrades...picking up tomorrow
 

After 2600 miles I decided to add a little....

IPD plenum
Cobb tune
BMC filters....

Looking forward to picking it up in the morning after today's work

Precision Instruments torque wrench & Suncoast center lock removal nut.

Really looking forward to seeing your results.

Are you doing a before and after dyno?

300 miles in and I just had to.......wow has the smile expanded on my face :rockon:

I know Suntek paint protection has been chatted about quick ask, were does the car chip the most ?

Local person using Suntek will do bumper, hood, fenders, headlights, wing mirrors, rockers and splash guard (in front of rear wheels at the bottom) for 1500 total.

- do I need to do the rear quarter panel complete ? Will it chip in the back of the rear wheel ?
- do I need to do the front fenders behind the front wheels at the bottom ?
- just do partial front fenders and hood ?

Any help would be grateful, of were you get the most chipping and debris, so I know were the value add is and not .

Thank you

Great call!

I don't want to make anyone jealous, but...

https://cimg9.ibsrv.net/gimg/rennlis...6465626f66.jpg

Too late! My two are plain purple... :roflmao::roflmao:

Jackpoint jackstands!

Have one black and one purple, but the purple one has the more complicated (original design) belt retainers on the sides and I decided to switch over to the pink with the newer, easier-to-use (though possibly a little less secure) design. All the purple ones at my local WalMarts have the older retainers, and WalMart doesn't seem to carry pink, so I had to go to Amazon.

Note when I say "complicated" I mean "complicated for a 5 y/o girl", and I want the girl in question to be able to get in and out without help... :D Besides, she has bought the "pink = girl stuff" thing hook, line and sinker so she thinks the pink one is just fabulous. And she's tickled, uhhh, 'pink' that the engine is in the back of the car and loves to ride in it, so this "upgrade" should be a home run. The Boy is happy to have basic black.

Experience may vary; I have a wide body. Apart from normal stone chips on the front surfaces, the parts of my car that have gotten most beaten up are: the bottom of plastic side skirts, the painted area in front of rear wheel arches, the painted surfaces inside of the rear wheel arches and the painted bottom of rear skirt behind rear wheels.

I would thus advise getting a race kit (front bumper, full hood, all of front fenders, mirrors) rockers and side skirts, rear fenders in front of rear wheel, painted surface inside of rear wheel arches, and the painted bottom of the rear skirt behind the rear wheels.

My windshield is also pretty pitted, so you may want to think about options to protect that too.

2 more oil filters and the oil bottle holder from Suncoast...

About to pull the trigger on a set of Michelin Pilot Sport Cup 2s for my 991 GTS. The stock P Zeros have been ok but I know that the Cup 2s will give me more grip for my upcoming track days.

Two new tow hooks from Rennline for my GT3.

I installed the extended height center console in black to add to my two tone interior. I followed the dIY thread found here on RL. Excellent info too but I did find the seatbelt trim pieces (see pics) a bit challenging to release. All other info was excellent! I really like the look and the comfort of this "mod"! Is it worth $355? Idk, but it was my bday! And there is definitely more room under the lid now (holds a LC9 mm nicely)!

https://cimg5.ibsrv.net/gimg/rennlis...e10bab7a5.jpeg

https://cimg9.ibsrv.net/gimg/rennlis...b3c28ff1d.jpeg

Tow hook, what tow hook...I'm still drooling over this beautiful GT3. Oh yes found the tow hook :-)

Thomas, where did you get it done?

https://cimg7.ibsrv.net/gimg/rennlis...5c9fea888.jpeg

Just finished installing new steering wheel from shadow993... so much better than the base wheel! No more stupid shift buttons! Install was super easy, I'm glad I did it myself.

Please post results of this. I am Very interested in results!

Mine goes in this week for similar upgrades.
IPD plenum
BMC filters
PSE retrofit w/Akrapovic install
Rennlist grilles
GT (991.2) steering wheel retrofit

Need to find a place to do a flash upgrade at some point also. Looking to hear the results from Mdftx1's update also.

Dewinator, that new wheel looks fab! Nice job.

Got a little excited with the foam gun....

https://cimg6.ibsrv.net/gimg/rennlis...4d7b9b1712.jpg

Neat list... 991.2 price?

I added a Charactre Exclusive rear wing!

Neat! How about more photos?

Cool pic..

Setup?

2nd on the foam gun--what car wash and foam gun did you use? Must be a high pressure system to get that degree of foam!

Chemical Guys Torq Foam Gun + SIMPSON Cleaning MS60763-S

Type of suds you use is also important. I use Honeydew Snow Foam Car Wash Soap and add WARM water to the foam cannon. I think this helps to get the most suds+foam per buck.

Thanks! I'm buying the Torq nozzle and Honeydew soap to use with an electric power washer and I'll report!

Arrived today. Great looking. Nice balance. Direct from Germany via Suncoast. $895 plus additional cost of brand new 991.2 air bag.

iCarsoft POR-II

Ill be doing a full review on this and a couple of other tools soon.

http://www.diagnostic-world.com/page...5&p=111381.cfm

Works on the engine, ABS, airbags, transmission systems to read & reset fault codes, and also takes 20 seconds to reset the oil service message interval.

Cheers..

Brake pads and fluid. Again. $$$$$
https://www.fototime.com/A86D26BA577DB1C/standard.jpg

Air filters. $$$
https://www.fototime.com/E24BA25BFC3988A/standard.jpg

New juice. $$
https://www.fototime.com/CE0373AADE2E093/standard.jpg

Valve caps. Because it's the only thing I'll really see!
https://www.fototime.com/B011AAB3EB0020E/standard.jpg

^juice is LexVan approved!:)

Are those the Pagid RS29 yellow pads? If so how do you like them and more importantly do you use them daily beyond track duty?

I've started tracking a bit more this year and thinking it might be time to move to better pads and fluid... but given my car is a daily driver wondering if the Pagid yellows might be overkill. Any thoughts would be appreciated!

Yes, those are the RS29's. For track they are the best I've found. I used them on my Cayman S and now my 991S. No fade, very long lasting, easy to modulate, relatively easy on rotors. Pricey stuff, though.

I drive them to the track, which in my case can be up to 8-10 hours away, but I don't daily drive them. It would be possible but they will get noisy and they work best when hot, which is rarely the case on the street.

I just got a new Alcantara steering wheel to replace the leather one for my C4 GTS Cab. I bought the car as a demo from a Porsche dealer so didn't have the option to configure it.

I wanted the Alcantara steering wheel for two reasons. Firstly, my GT3 has an Alcantara steering wheel and I have grown to love it. Secondly, during the first couple if days of ownership, I briefly left the car in my driveway with the top down. When I hoped in the car, the leather steering wheel was so hot, I could not touch it. Alcantara wheel solves this problem. Not sure what I will do with the leather steering wheel now.

I was looking at carbon fiber options like you have for my next car and was considering the CF steering wheel. When I saw an image of it and realized the CF was on the top of the rim I decided no way. In So Cal that would make the car undrivable without gloves.

Got Xpel Ultimate for the full front! Not happy with a couple things thought, hopefully they get straighten out.

https://cimg6.ibsrv.net/gimg/rennlis...898e5dd1e.jpeg

Hi, care to share your dissatisfaction with the xpel? I'm thinking about getting mine done. Was it the installer? or the product itself?

Hi, I'll send you a PM, happened in the weekend and Xpel was closed so I'd like to try to resolve it first.

Hi Giuseppe, First, love the GT3.

Interested to know about your Xpel story too. Currently I have the front and half hood protected (unknown brand - done by dealer/previous owner). I am planning on replacing the half hood with full hood. Also looking into the rear fenders. I noticed a uniform collection of minor rock chips appearing on both sides above the P factory installed shark fin rear wheel protection.

Planning to use Xpel. Installed has 3M too

Thanks

Hi Paul, I'll write you in private, whatever you decide though make sure you see the installer work on the exact same model as your car.

GiuseppeM, did you get a chance to speak with the installer?

Thanks, I got the PM. Much appreciated.

Valentine V1, Blendmount, and eBay mirror tap.


https://cimg4.ibsrv.net/gimg/rennlis...0a6dc7f0ad.jpg

Nice photography. I have the Max360 and Blendmount. Very impressed. Check the mount height parts included. Blendmount sent a short section and this caused the radar to be jammed against the mirror. A quick call to Blendmount and a longer section was shipped. Perfect now.

Just an FYI - if you plan to install the Porsche sunshade, just note that it will come in contact with the radar, so will not sit flush to the window. It still works fine as the 2 sun visors lock it in place. Just something to be aware of.

Thanks for the info, Paul. I'll install it when I get back from my business trip. Please share a photo of your setup. :D

Ultimate Cupholders (outstanding design, handy location but out of the way and super easy install) and iCarsoft PORII to reset service reminders.

Got this for my existing Passport MAX 2 RD and Blend-Mount:

Awesome. I ordered a mirror tap replica on eBay for $10. Great quality and no wire cutting/running.

The issue with hard tap from the fuse box is you have to manually turn the device off, right?

I hope not. I bought it online and will be having it installed. Let me look into that. Which one did you get? I had one before, don't remember which one, which one are you using?

If you find a fuse that will turn off when the ignition is turned off (i.e. radio, wipers) and tap into that fuse, the RD will turn off when the car is turned off.

I will soon be doing a C2s to GT3 front bumper conversion. So i received the plastic mounting parts for the bumper today. Was also expecting the bumper to arrive but it did not turn up.


https://cimg4.ibsrv.net/gimg/rennlis...a3bc5e0b13.jpg

To avoid these issues (and the very remote possibility that tapping into the electrical system could screw everything up and void my warranty) and save a few bucks, I simply plugged my V1 into the 12V outlet in the glovebox, ran the wire out of a hole in the bottom right-hand side of the glovebox, and used a pry tool to tuck the wire in through the pillars and headliner. You absolutely cannot see any wire.

The only issue is that I've used 1 of 2 12V outlets, but if I wanted an extra one I could just purchase a 12V outlet splitter...

Ha Ha... I used to do it this way in my older let's say lesser Non Porsche Cars...Mitsubishi Eclipse GSX AWD, Nissan 350Z, Infiniti G37.

Michelin Pilot Sport Cup 2 tires, KW Height Adjustable Springs, Pagid RS29 brake pads plus brake fluid flush. All confirmed/ordered and being installed next week Friday.

Will probably need to add a new Aerokit front lip shortly as well depending on how much we drop it. Aiming for GT3 ride height. :D

I had the HardTap wire (from Blendmount) installed in my 991 GTS (by a local installer). No need to turn on or off. Just jump in, turn the key it it powers up (and down when you turn off). Not sure if the installer did something special at the fusebox - but they said that is the way they always set them up.

Pleased you explained all that! I thought you were planning a hiking vacation and getting all your tent rods and poles organized!!! :roflmao:

Buy this, no running wire and it will turn off when the ignition is off. Much cleaner install. https://www.ebay.com/itm/321669892746

Run it to the fuse box. Really easy for a pro (or non-pro). My installer said never run to the mirror!

Does your installer have a logical reason or proof on any issues of tapping into the mirror? The benefit of tapping into the mirror is the radar turns on/off automatically with the ignition. Mirrortap has sold many units and lots of happy Porsche customers (on this forum).

The installer makes more $$ :-) It's good to spread the wealth and help feed his/her family :thumbsup:

:corn:

Some "not-quite-OEM-though-they-came-in-'OEM'-boxes" colored center caps. Luckily they came with a set of valve stem caps with colored logos, too. I'm feeling rather cresty.

XPEL installed by Chris at "All in The Details" in Morristown NJ: http://www.allinthedetailsnj.com

When I purchased the car the front end and half the hood was covered. I got the full hood section replaced with XPEL. I also noticed some very light rocks chips appearing on the rear fender above the P Sharks Fin! Decided to get the rear fender and rocker section done also.

Very pleased with the quality of Chris' work. He even wraps the edges under the panel (where he can).

Don't buy this. The cable is 2" too short. 14-15" would be more ideal. :(

I've gone a bit bonkers as just getting my 911 CS back - after ED May/Jun - Mon. But in prep:

• Lava orange 'shells' for keys
• Lava ignition switch (can you guess my CS's colour? :D )
• Xpel - booked-in for all-front & fenders
• Frunk liner
• folding track tow hook w/ GoPro mount
• aluminium track mat
• Rear Shelf Mat - 911 Carrera orange/black
• Porsche sunshade
• indoor cover
• License plate frame black for rear - 'Carrera'

I'm also going to buy some new cleaning gear incl. dry wash. for quick spot cleaning.

Lava Orange!!! Do I win a prize? Interested to hear about the tow hook mount - Rennline?

Thanks. I already got the hardwire fuse kit in advance of going to the dealer for the install mainly to avoid any charge for parts. I am going to discuss with them about where to best tap it. They said they have their own parts. So if need be they will use their method. I am not sure, but I did previously have the wire tapped from either the mirror or other location near it. It was no problem. I appreciate your follow up.

Bingo! You also 'win' the prize. Truly, Rennline's array of tow hooks is bewildering!

Looks fantastic! What was the cost to do this job, I would like to do similar!

That is standard operation with the MirrorTap. It is powered by the rear view mirror, places minimal draw and goes on and off with the ignition. No special fuse box work.

15" is the min, at least for an escort.

Black/polished nickel hood crest, clear LED side markers, red S, indoor car cover, side wind diffusers, valve stem covers-silver w/ black crests, black crest wheel centers. Trying to find black chrome tips for PSE. All in anticipation of my new C4S coming in the first half of next month.

recent mods
 

2013 C2 black on black on black

mods to date (in order of acquisition)

clear LED side markers (had dealer replace before leaving the lot)
all-weather mats and frunk liner (Weather Tech)
hood protector (Suncoast)
30% 3M tint (Precision Tint, Philadelphia, PA)
AWE exhaust (AWE Tuning, Horsham, PA)
Ceramic Pro coating (Auto Obsessions NJ)
Autoflex dip for wheels, model delete (Kustom Dips, Philadelphia, PA)
carbon fiber interior trim (MA Carbon)
GT3 mirror housing
USB cord and magnetic vent phone holder (Amazon)

Mods to come:
Morel front ADMW woofers and rear hybrid 402 speakers
JL Audio 5 channel amp
Blackview dashcam (2 channel)
Escort 9500ci with LI laser blockers
Photo radar cam blocker

PHL, I'm in Center City. We should grab beers and talk shop after I pick up my GTS in Stuttgart.

TorqueChap,

That sounds like a great plan!! We should post this in the East Coast thread and see if we can get a group together. Which dealer is helping you out? I got mine thru Porsche of the Main Line.

UK std unleaded "95"octane = is what they call 90/91 octane in the USA

UK "super" "97/99"octane = is what they call 92 /93 octane in the USA

Porsche of Conshohocken had the last unlocked GTS Targa allocation in the country. (Ask me how I know lol).

Just started a thread here.
https://rennlist.com/forums/east-us-...y-members.html

Let's figure out something when I'm back stateside.

Thomas, where did you get them installed

Here's my story with Xpel: https://rennlist.com/forums/991/9450...l#post13466399

I got Fabspeed's Carbon Fiber Wall Art. Use promo code "SIGNHERE" for $20 off.

http://www.fabspeed.com/carbon-fiber-wall-art-porsche/

Check how it's made:

Finally pulled the trigger on the set of TPC Racing Sway Bars + Drop Links for sale in the marketplace (thanks Bob!). Talked to a few people including my local shop and they all confirmed the change will make a noticeable improvement so figured I would take the plunge. Already have the DSC V2 module and apparently the two work quite well together, we shall see! :D

Okay...I'll join the party....Planned this for a while every since I picked up my new to me CPO '13 Carrera S in trade for my '14 Cayman S both in Agate Gray. Car was nicely optioned with SPASM, PDK, and a few other goodies but lacked two things specifically I'd wanted. Those were PSE and the moonroof option. Thought the car was rather sedate with the OEM regular mufflers and kinda dark inside with the standard sunroof so after a bit of research and also quite a bit of Q&A between my dealer's Master Porsche Technician, Porsche, and a few aftermarket vendors...I added:

1) OEM Porsche Moonroof retrofit
2) PSE console and vaccum tube retrofit
3) PSE programming for #2
4) Rennline Front Bumper Grilles [black]
5) OEM Porsche Center Radiator kit
6) Akrapovic Ti Catback Sport Performance Exhaust
7) MACarbon CF interior trim retrofit (dash & center console)
8) IPD 991 Pleneum
9) 991.2 GT Multifunction Steering wheel
10) 991.2 Steering wheel Airbag

All of the above except item #7 were done by my dealer service dept while I handled the CF interior retrofit myself as a DIY (took me about 30 mins over an evening beef along with re-packing my OEM silver trim). The GT4 991.2 wheel does directly bolt on and work with the 991.1 generation cars...HOWEVER the multi-function controls do no code and the dealer couldn't get the new wheel controls to recognize and activate/work on the tester. So they replaced my old OEM wheel back on the car. Options include A) obtaining the 991.2 multi-function control module and seeing if that can be installed to control the wheel and also talk to the car's as well OR B) getting either a 991.1 Sports Design wheel + MF stalk or a 991.2 GT wheel minus controls and adding the MF stalk from the 991.1. Technician is not sure if option A) will work and I am willing to try IF the 991.2 module is returnable/refundable. Otherwise its likely option B as the OEM 991.1 MF wheel is just an eyesore to me. Not attractive at all. My old 981 Cayman S was ordered with the Sports Design wheel for a reason! If so will just sell the 991.2 MF wheel and airbag since they were special order items.

Must say MACarbon's quality and service was outstanding! Even included a tool kit to remove the parts and a CF cleaning kit also. Top notch parts and quality for all. My AZ dealer did a great job on the car and I was pleased with the result and even the overall cost...until the car was hit by an SUV driver 3 days later during a trip to Las Vegas while leaving a casino parking garage...but that's another story and post. Didn't get to take many pics post upgrade for you guys due to the trip then accident [vehicle is now at the body shop] but will do so when I get it back out of the body shop...hopefully soon.

WOW!!!

Those are some extensive and great mods. Way to make the car the way you want it.

Hope the damage wasn't too bad.

I agree with you, the .1 MF wheel should be killed with fire and to my eye, the .1 Sport Design wheel is one of the best looking steering wheels ever made. It was a must have for me.

I see a number of folks looking to "upgrade" their .1 with the new .2 wheel but the only thing I am not in love with on the new .2 cars is the steering wheel. Wonder if I can do a down grade once I get my .2 CS? :cheers:

Keen to know when you get the 991.2 steering wheel mod working

Ok, I just took delivery of my 99.2 Targa 4S. I purchased the clear LED side markers from Suncoast. Dealer told me he would install at N/C for me. When I went to pick up my tags and get new markers installed the salesman informed me that because they are LED, there is a chance of them messing with the PCM, getting fault codes and making me responsible if anything happens. He said if I would replace those lights with regular bulb lights there would not be an issue. I looked at my current OEM orange markets and LOOK LIKE LED's!!! Does anyone know if the new 991.2 have stock LED side markers??

Hi guys-
Well it looks like I'm not the the only one that really wanted the new .2 steering wheel for my '13 CS2 Cab. I found this one on eBay. This one is the non-multifunction PDK version. These are "remanufactured" wheels. Meaning they are OEM parts that are re-wrapped to make them slightly thicker and with the 12 o'clock red ring on mine. They also used a nice light grey stitch that looks awesome. This is a real upgrade. One thing I didn't realize is how much quicker the paddles are. The travel is VERY short. Like probably half the travel of my standard sport wheel. It makes shifting gears even more fun. Just a slight pull changes gears. So cool. I also want to point out how much this changes the feel of the whole car. It's got a real premium chunkiness to it. Tough to describe. I bought this with the airbag and doing it myself was a snap. Just like the alcantara wheel I replaced. Also, I think it just looks EPIC.

Thanks-
Alec

BTW- I'll be putting my alcantara wheel, arm rest and shift lever in the classifieds soon. Great condition if you're interested. I will also have the original airbag for sale too.

Well, now I've got 2(!) sport Design wheels from the .1 version. One leather, one Alcantara. Happy to sell you one! The Alcantara version has a red ring and stitching. It's pretty sweet.

Alec

link to ebay site for steering wheel?

Here's a couple more shots of it.

alec

I bought it from this guy:

http://www.ebay.com/usr/911ava?_trksid=p2047675.l2559

He was great. No issues. Exactly as expected. Super not cheap though. What is with these cars?

alec

my MF 991.2 wheel may be up for sale soon on ebay too since it won't work with my 991.1 so far from a programming aspect. Adding it and the MF stalk just defeats the purpose. If anyone is interested in it...PM me.

Clear LED Sides to replace the Amber

Hardwired the Radar For Passport Max2 with Blend Mount

Rear Tire Driver Side Pirelli 305/30ZR/20

I bought my 991S some Motul 600 brake fluid, Pagid RS29 pads and new OEM rotors. My puppy was overwhelmed with excitement watching me bleed the brakes.

https://www.fototime.com/756819A0A29431F/standard.jpg

But then UPS delivered the rotors. FINALLY, something for Sox to do...eat the boxes! It was a good day for all.

https://www.fototime.com/01C2414E244A959/standard.jpg

https://www.fototime.com/40A9A4C8633C332/standard.jpg

That is one cute puppy. What kind of breed?

PF

A set of new Michelin PSS from Tirerack. So happy to get the Pirellis off of the car.

Thanks! My garage buddy is a Portugeuse Water Dog. She's a lot of "help". She hides lug nuts, steals shop towels and climbs under the car when I'm changing the oil to see what I'm doing. :) I wouldn't have it any other way.

https://www.fototime.com/F76B85945D3682E/standard.jpg

Great dog! Mine barely fits in the passenger seat:

https://cimg3.ibsrv.net/gimg/rennlis...e26b640fb.jpeg

^^^Awwww! What a great face! Kind of a "C'mon, you can go faster than that!" look!

Thanks! I love my dog. Her name is Luna and she had me at hello. I'm trying to figure out how I can make her more comfortable and thought of buying some custom made pillows to fill the floor in front of the seat so it's completely level and she can spread out. Has anyone done this? What does everyone do with their big dogs?

Look its duggo woof bork bork

Had my car corner balanced yesterday along with an adjustment to the alignment, made it slightly more aggressive to help on some upcoming track days. As part of the process had my shop adjust the ride height as well, since installing the KW HAS kit the car settled more than expected and was riding a bit too low... lower than GT3 ride height actually. Much better now and feels fully dialed in, big test will be Sat morning at the track. Can't wait.

Also Pagid yellow pads continue to squeak like a mother around town... hopefully with some hard work this weekend they will bed in and calm down a bit. :D

Sport steering wheel and front lip
 

Installed a front sport lip from suncoast and PDK sport steering wheel from shadow993
https://cimg9.ibsrv.net/gimg/rennlis...23b16a1f4.jpeg

Leather sport steering wheel<br/>

https://cimg0.ibsrv.net/gimg/rennlis...8d7207cf2.jpeg

Front sports lip

Sweet mods! Love the look.

How do you find the difference? I made that change recently and love the feel of the Michelins, but am not completely convinced they offer any more outright lateral grip.

custom full front clear bra from Suntek.

Custom GT Silver Porsche crest
Rennline grill kit (black)
LED clears
Precision Instruments CL wrench and alignment tool
Mods4Cars
Rimskins
Xpel Three-Quarter Wrap
Carnewal indoor car cover
Ultimate cup holders (two)
2016 Hardback GTS brochure
2016 Hardback Targa brochure
Country stickers: Switzerland and Monaco (bought on ED)
Switzerland toll pass sticker (bought at the Swiss-Italy border)
Full tank of Premium 100

And the car hasn't even landed in the States yet ;)

Gotta see some pics

At the risk of being redundant, here are pix of my AWE foilers, Clear LED sidemarkers, and my CTEK 4300 doing its job maintaining my battery (sits nicely on the base of the mirror). I use the CTEK any time my Porsche is going to sit for 4 days or more.

How do you like the painted spoiler? I was thinking of doing the same.

I like the painted spoiler lip. But I scuffed on a curb b4 I was used to parking it. I've got a quote to mask it off and paint for $150. I thought it could just b popped off without removing the entire bumper cover.
Does anybody know if it just clips in, or if the bumper cover needs to b removed?

It comes off easily by itself. I did the same thing.
https://cimg4.ibsrv.net/gimg/rennlis...8b1acd7d81.jpg

Suntek PPF for the front bumper
Opti Gloss coating for rest of car
Clear LED corner lights
Tint (20% back 3 windows, 5% sunroof, 50% side windows)

https://cimg8.ibsrv.net/gimg/rennlis...6a3f8608ae.jpg
https://cimg0.ibsrv.net/gimg/rennlis...1e0ae73e4b.jpg

Porsche Roof Transport system! Can't wait to take the bike to wine country and enjoy those back roads on 2 wheels and 4!

Recently picked up:
- OEM accordion style sunshade (got a local dealer to match suncoast, I usually get the covercraft from autoanything.com but this was the same price or cheaper and included P branding and a storage bag).

- License plate frame security caps (http://www.suncoastparts.com/product/SKUPFSC.html). Call me crazy, but one time while parked outside an old G35 coupe had its license plate stolen by car thieves who had stolen a different G35, which resulted in a long DMV line wait for me. The plate frame bolt caps on my OEM license plate frame pretty much instantly fell off and I replaced them with these.

- Porsche classic tire gauge (apparently this has a Bourdon mechanism. I plan to supplement my accutire with this, as I recently had a TPMS display issue that makes me question the accuracy of both my accutire and the PCM's TPMS).

I think at this point it's just an SSK and getting her Xpeled...

Roof rack and bike carriers
https://cimg9.ibsrv.net/gimg/rennlis...c73770fa5e.jpg

Race bike and standard bike carrier

https://cimg0.ibsrv.net/gimg/rennlis...8df9913106.jpg

Hanging out by the mansions in Fairmount Park

Damn!! Cool mod!

Not purchased today but finally installed earlier, TPC Racing Stage 1 Suspension kit aka sway bars + drop links. Only had a very brief test drive following install but very, very impressed with the change to turn in feel and overall stability during aggressive cornering.

The guy at my shop who runs a GT3 Cup program took it for a road test + shake down and he said he LOVES the feel of the car now with the KW HAS kit, DSC v2, Sport Cup 2 tires, and TPC sway bars. He said it now feels better than a 991 GT3 but he was likely just pumping up my tires given my recent investment with him. :D

Real test of course is next track day on Sept 13th, looking forward to it!

That sounds like a great setup! Quick question from someone who doesn't know very much about suspension: are the KW kits compatible with the DSC? My understanding, which sounds like it was wrong, was that KW was a separate system.

Aaand seems like I answered my own question by having a look through the options on the KW site. HAS kit is springs only. Got it.

Question then becomes: did you notice an improvement in handling when you lowered the car, or was it more a cosmetic enhancement? Thanks!

Yes absolutely... part of it was the combination of ride height, more aggressive alignment, and corner balance but there is no doubt the handling is now on another level after installing the KW kit. Flat, sharp, responsive, etc.

Interesting...

Thanks TorqueChap!!! Looking forward to meeting the Blue Baron when she arrives stateside!!!

Ordered the AWE Wind Diffusers. Great service from AWE. Parts arrived in 4 days. Easy installation. I hate reading instructions and I'm a klutz at assembling things. So .... my wife did everything. Took about 10 minutes for the first door as she wasn't sure how hard she could pull and tug to remove the first piece. Second door took about 4 minutes. The Wind Diffusers work as advertised. A quick test to 115 and the cabin was dead silent.

Installed some MagnaGrafik carbon fibre look Stone Guards to change the look a bit. Already had the rear panels done in Xpel, so these replace the Porsche clear guards.

https://magnagrafik.com/Default.aspx

I bought my 991 an Xpel ppf, in Stealth. Turns out the wrap, while good at protecting the paint from the ravages of urban foxes, was less than useless at protecting against stone chips and so ended up more full of holes than the case for Britain leaving the European Union (sorry). So I ditched it and went for paint protection, with a slight difference. For those who don't know, Xpel Stealth is like the regular Xpel Ultimate, but with a matte finish. It looks pretty cool on metallic paint imo, as one can still see all the flecks in and depth to the colour.

Here' are a couple of arty shots from the place that did it

https://cimg7.ibsrv.net/gimg/rennlis...a9515a98e2.jpg


https://cimg3.ibsrv.net/gimg/rennlis...5ef1131024.jpg



And here it is in the real world


https://cimg4.ibsrv.net/gimg/rennlis...2cd3b0fe45.jpg

https://cimg6.ibsrv.net/gimg/rennlis...5f89e9b267.jpg

Excellent pic!

Nice. The matte finish is cool!

[QUOTE=MagicRat;13561177]I bought my 991 an Xpel ppf, in Stealth. Turns out the wrap, while good at protecting the paint from the ravages of urban foxes, was less than useless at protecting against stone chips and so ended up more full of holes than the case for Britain leaving the European Union (sorry). So I ditched it and went for paint protection, with a slight difference. For those who don't know, Xpel Stealth is like the regular Xpel Ultimate, but with a matte finish. It looks pretty cool on metallic paint imo, as one can still see all the flecks in and depth to the colour.

Nice GTS and a very unique look. Any special cleaning required for Matt? I have Xpel on my GTS and so far just used the Griot's Speed Shine.

By the way, I am a British expat living in the US, so nice to see some British street shots :-)

[QUOTE=Paul007;13561458]No special cleaning - just soap and water. I use a quick detail spray and sometimes a left over can of 'bike shine' if I can't be bothered to clean it properly. The only problem it it attracts dust like nobody's business and shows up every spec. Takes 3 minutes to dust it off though, and I believe there are some anti-static sprays available...

Only slight caveat at the moment is that it doesn't appear to be 'self-healing' as the marketing suggests. I have a few little chip marks which have not gone away. My installer says this isn't normal and has sent the pictures to Xpel, who agree. Taking the car in this Friday and leaving it with them for investigation.

New to me CF Airdam and Matte Guards Red Carrera stickers.

https://cimg4.ibsrv.net/gimg/rennlis...3b65d6d747.jpg
New
https://cimg2.ibsrv.net/gimg/rennlis...5512787a38.jpg

Very...very nice. Where did you get the Matte Carrera stickers? Very nice in red.

Me??? Just got my car back after a "run-in" while in Vegas last month where an inattentive driver backed into me. So..replaced my OEM 991 bumper and sport spoiler with a new Sports Design one w/Rennline Grilles in black installed. Very pleased with the results! :)

Thanks Mdrobc, I got the lead on the decals from another member here. Here is a link to the seller in the UK. Very responsive and will work with you on custom designs/looks, as in my case.

http://www.designstuffonline.co.uk/

Nice result on your car.

That's-a-wrap
 

Brilliant Blue Matte Metallic wrap (fresh-reason for post) + Sport front lip +Techart Side Skirts + GTS Rear Deck lid +Clear side markers + Alcantara Shifter/A-pillar and Sport steering wheel+ at her first track event :)

Cool. Where did you get those beauties?

Suncoast

Aren't those the 997 centerlocks?

Yup. Let's see what happens. If any issues arise i'll but the originals back on. :icon107:

Hey Vise, give a review on those sway bars after you try them out. My KW HAS went on today. Those sway bars may be my next mod.

When you get the chance, can you post pics of the car equipped with those CLs?
They look very nice...

Yeah I'll post pics hopefully this weekend. In the meantime it should look exactly like this.


https://cimg2.ibsrv.net/gimg/rennlis...08217f1e03.jpg

Stablemate for DD duty.

https://cimg9.ibsrv.net/gimg/rennlis...f29a147a42.jpg

Nice, best of luck with the centerlocks and hope they work out fine. I'm sure you've read the same but I've heard they do work but aren't recommended by Porsche due to some slight difference to the 991 setup. At the cost + potential impact if something goes wrong I'll stick with my black nuts. :D

As for the sway bars... they are installed but I've only had a very limited opportunity to do any spirited driving. Immediate feedback after a few aggressive on/off ramps is that turn-in feels sharper and overall the car is more planted + stable during aggressive cornering. They do however make some clicking/tapping noise at low speeds due to the drop links included for the front... it is somewhat noticeable but not a huge deal IMO, at least not so far anyways.

The real test will be in two weeks at my next track day, stay tuned... and also make sure you post some pics of your car with the KW HAS kit installed! :thumbup:

991.1 C2S Cab mods
 

Bought a 991.1 C2S cab in agate grey earlier this year and so far can highly recommend the mods I've done, all are fully reversible so far:

- paint protection film
- mod4cars SmartTOP -must-have for cabs
- Brodit (Proclip in US) Centre console mount + iPhone 6 tilt-swivel active holder with cig plug: the fixed black lightning cable runs easily under the trim to the glovebox where it's usb end can be removed from the cig plug if desired. I also bought their 15deg wedge angle spacer (fits between mount and holder) to orient the phone more towards the driver when in place
This setup took a lot of trial and error and buying and returning different parts but v happy with the result, much better than my previous Ram mount + windshield suction cup solution
- t-design sunglasses holster (edit: works fine with Brodit mount in place too on same side, after some customisation by t-design)

P S E Inbound

The gfe was nice, but....


https://cimg0.ibsrv.net/gimg/rennlis...95448ef2e.jpeg

Ryan - wondering if you have had chance to put the red CLs on

I did the same thing about a month ago. You will not be disappointed.
Business must be good at Vandelay Industries. Import and Export ? ;)

Latex.


What did your install cost? So far, I'm quoted 850 one dealer and one Indy shop. $750 at other dealer.

Any issues with setting this wheel up to work? I may go that way and move to this one and have them install the Sports Design control stalk in my 991.1 to control my MF controls. Should work correct?

Bought some more juice! Can't pass up a NAPA sale!

https://www.fototime.com/541CB46A2F1A126/standard.jpg

Is that cheaper than the 5qt jug from Walmart?

I believe there is a rebate. ..I'm too lazy to link

OK. .I'll get off my ass.... thanks to lexvan's hot scorching oil deal from March this year.

Here is the current deal.

https://mobiloil.com/en/promotion/mo...nd-mobil-super

I get 5w50 which most places don't carry. It's on sale for $5.79/qt. Plus there is a $12 rebate per 5 quarts. So it's a great deal.

I got some coil springs from http://www.sterling-springs.co.uk/ company. I guess, it is one of the best manufacturers nowadays. The prices are really good too. I can recommend you guys to go for it as well

just received the car back from ceramic pro coating...

https://cimg5.ibsrv.net/gimg/rennlis...1e65ab255b.jpg

Oops sorry forgot about this thread. Yeah the KW's and Red Center locks are on. I need to take some decent pics. Here's a quick iphone pic.


https://cimg8.ibsrv.net/gimg/rennlis...b4a459b9f8.jpg

Wow, that looks real sweet! More pics please! Assuming no issues at all doing the switch?

Mobil 5W50 is not packaged in those jugs. Only quart bottles.

I'm in Velvet.

Apologies for the late reply. I missed your post. I have a C2 - as you know, your system requires less work. You're on the right track; with regard to asking the dealers to compete . They will.

Happy to PM you the final cost.

A.W.E. wind diffusers. Match perfectly.

Was it hard to install?

Nickel and color matched agate hood crest.

https://cimg5.ibsrv.net/gimg/rennlis...883f5415c.jpeg

Easy. Maybe ten minutes a side, even with the LCA wires.

Very cool, thank you. Reduced wind noise as advertised?

Much improved, especially with both windows down.

My wife installed ours. Took 10 minutes for the first one and then less than 5 minutes for the second one. No wind noise at triple digit speeds.

Edit: don't know why the pict is upside down?