steve9

Bob Z.

OP - Note the letters are on the same level as the points on the taillights and yours are higher, which I assume you know by now based on the recent posts.

eastsideguy75

porscherex

What color is your GT3? Nice.

Porschefection

Go out and measure. If your "P" is closer than 2 11/16" from the light strip then they installed it too high.

Here is photo home from the dealer...

eastsideguy75

2 11/16 from the top or from the bottom of the light strip?

Porschefection

Bottom. Use the detailed diagram shared above. The duplicate colors means they share the same measurements.

The letters are positioned ever so slightly different on certain letters to make a very subtle arch. It is not correct to use a straight edge and line them across like Scrabble :-)

trust me on this. I work with type all day.

eastsideguy75

I trust you, but on my car if I measure 2 11/16 from the light strip, the letters look way below the > < from the tail lights. Anyway. I am happy with how it looks.

eastsideguy75

Also, I just measured this one from the dealer which is just PORSCHE with model delete. https://www.porschebellevue.com/new/...cd254ea359.htm

I went and measured it, the distance from the top of "S" to the top edge of the bumper was 2.4675" (which is less than 2 11/16 or 2.6875").

Bud Taylor

I think your

smight be to high here is my model delete car

mfonseca

Can you measure yours for me? I also have a 991.1 and am looking for the proper placement. Thanks in advance.

Porschefection

yes the S should be shorter distance from the light strip than the P. This is reflected in the diagram above.

Porschefection

someone needs to make silicon templates and sell them

PCA1983

While on the subject of lettering and re-lettering, what is the best way to remove existing letters without damaging paint/clearcoat?

Porschefection

Dental floss.