Sharkwerks Exhaust for 991 and 991S - Inventory Blowout!
1 Attachment(s)
Clearing out the warehouse
We have exactly (1) brand new system left in stock. Normally $795+shipping, but this new system is available for $595 shipped saving you more then $200! Contact us today for a great deal on this exhaust. From Sharkwerks: We have re-designed this pipe for better fitment and to reduce vibrations, but there may still be a slight increase in vibration on some PDK-equipped cars (only) when idling at stops in Drive mode. We recommend using the Sport or Sport Plus modes if this is a concern, which allow the engine run smoother and at a slightly higher RPM. Note: Can also be used on S / C4S models with the 3.8 engine, please read below **. Not recommend for systems that already have the PSE "Sport" exhaust. Following on from our well-received Shark Werks 997 GT3, Turbo and Carrera exhaust designs we have now applied our customary Shark-bite to the Porsche 991 Carrera 3.4L non S model. In stock form the car has been accused of sounding high-pitched, tinny and too mechanical in comparison to S models, especially with their deeper sounding PSE options. 3-D CAD designed with optimal flow, fit, weight savings and sound enhancement, our system replaces the center muffler on any Porsche 3.4L and 3.8L 991 Carrera. By utilizing appropriately-sized diameter tubing and straightening out the flow we achieved our desired sound and minimized resonance. Our direct bolt-on exhaust installs into the factory location without any modification or compromise and is completely reversible. An overall weight saving of 7 pounds is achieved with a more aggressive idle and outside bark with a deeper tone. On the inside you can still talk on the phone and/or listen to the radio without any compromise. When you apply aggressive throttle you can hear a more exciting pitch and tone. Playing around with the throttle induces crackles and deeper howls more fitting for a 911. |
Originally Posted by CMS
(Post 14574815)
Clearing out the warehouse
We have exactly (1) brand new system left in stock. Normally $795+shipping, but this new system is available for $595 shipped saving you more then $200! Contact us today for a great deal on this exhaust. From Sharkwerks: We have re-designed this pipe for better fitment and to reduce vibrations, but there may still be a slight increase in vibration on some PDK-equipped cars (only) when idling at stops in Drive mode. We recommend using the Sport or Sport Plus modes if this is a concern, which allow the engine run smoother and at a slightly higher RPM. Note: Can also be used on S / C4S models with the 3.8 engine, please read below **. Not recommend for systems that already have the PSE "Sport" exhaust. Following on from our well-received Shark Werks 997 GT3, Turbo and Carrera exhaust designs we have now applied our customary Shark-bite to the Porsche 991 Carrera 3.4L non S model. In stock form the car has been accused of sounding high-pitched, tinny and too mechanical in comparison to S models, especially with their deeper sounding PSE options. 3-D CAD designed with optimal flow, fit, weight savings and sound enhancement, our system replaces the center muffler on any Porsche 3.4L and 3.8L 991 Carrera. By utilizing appropriately-sized diameter tubing and straightening out the flow we achieved our desired sound and minimized resonance. Our direct bolt-on exhaust installs into the factory location without any modification or compromise and is completely reversible. An overall weight saving of 7 pounds is achieved with a more aggressive idle and outside bark with a deeper tone. On the inside you can still talk on the phone and/or listen to the radio without any compromise. When you apply aggressive throttle you can hear a more exciting pitch and tone. Playing around with the throttle induces crackles and deeper howls more fitting for a 911. |
Originally Posted by raidersfan
(Post 14575283)
What do you recommend on PSE-equipped 991's?
|
What do you recommend on 991.2 non-PSE base?
|
Originally Posted by 2001f4s
(Post 14576213)
What do you recommend on 991.2 non-PSE base?
|
Deleted
|
PM and email sent!
-Brysen |
Still available?
|
is X pipe still available?
|
Are you guys not making them anymore?? If so I’ll have to take mine off my C2 if I ever sell it. Sounds amazing, you guys got the balance of brutality and civility down pat. I’ve seen some manufacturers claim HP gains from these. Is that a realistic expectation? I saw one claim 35+ HP from simply an X pipe which I got a chuckle out of. I’d imagine if anything, maybe 10 or so at the flywheel. Edit: Thought this was a thread by the manufacturer for some reason. |
SOLD
SOLD. Thank you for all the interest. Let us know if we can help with anything else for the upcoming track season.
|
Not available anymore?
|
All times are GMT -3. The time now is 08:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands