Notices
991 Turbo 2012-2019 Turbo and Turbo S
Sponsored by:
Sponsored by: Road Spy

Sharkwerks 991 Turbo (S) exhaust

Thread Tools
 
Search this Thread
 
Old 07-22-2015, 11:35 AM
  #31  
CMS
Former Vendor
Thread Starter
 
CMS's Avatar
 
Join Date: Dec 2014
Posts: 771
Received 22 Likes on 19 Posts
Default

The link below summarizes the Sharkwerks system for the 991 turbo. Let us know how we can help. In stock ready for immediate shipping.

http://www.competitionmotorsport.com...14-SW991TT.htm
Old 07-22-2015, 04:37 PM
  #32  
Need4S
Burning Brakes
 
Need4S's Avatar
 
Join Date: Dec 2014
Location: Silicon Valley
Posts: 1,171
Received 76 Likes on 58 Posts
Default

The SharkWerks exhaust is truly terrific. I've been able to drive it for a few days now, and I can say the videos don't really do it justice. It sounds even better in person. The actual performance differences are small, but I also notice that the turbos spool a bit more quickly and I find myself not needing to dip into the throttle as much as before because the power seems come in just a tick more responsively. At first I thought this was just because I had heard that mentioned, but I looked at the mpg reading today and there is a 1-2 mpg improvement over my same commute with about the same traffic. No one gets these exhausts to improve fuel economy, of course, or for performance improvement (even an added 15 hp is less than 3% of the hp output) but the improvement in mpg is an indication that the freer flow is helping. Highly recommend this to every 991 Turbo/S owner.
Old 07-22-2015, 07:07 PM
  #33  
Dan@SharkWerks
Premium Sponsor
Rennlist
Site Sponsor

 
Dan@SharkWerks's Avatar
 
Join Date: May 2008
Location: Bay Area
Posts: 507
Received 18 Likes on 14 Posts
Default

Thanks for the feedback and glad you like it! Your car looked great in blue!
__________________
Dan Kennedy
SharkWerks: www.sharkwerks.com
Northern California's Porsche Performance, & authorized Evolution Motorsports, TechArt, HRE and Tubi, Cargraphic dealer and installation center
Phone: 510-651-0300
Email: dan@sharkwerks.com

SharkWerks' Latest Updates on Twitter
Old 07-24-2015, 01:06 PM
  #34  
Randyc151
Rennlist Member
 
Randyc151's Avatar
 
Join Date: Jul 2015
Location: Virginia
Posts: 1,480
Received 269 Likes on 171 Posts
Default Picture...finally

I mentioned that my dealer had trouble getting both of the factory tips to line up flush with the back of the car as it comes from the factory. Originally, to keep them centered up, one side would fit flush while the other stuck out about 1 inch. We finally decided to just mount both tips sticking out about 1 inch, because I think it looks badass, and way better than factory anyway. I'm confident others can get them both flush with some slight additional work, but I didn't want to keep paying the shop rate for the local dealer to screw with it the rest of the afternoon. $$$


Here's how it looks on my car.
Attached Images  
Old 07-24-2015, 01:30 PM
  #35  
sharkster
Addict
Rennlist Member


Rennlist
Site Sponsor

 
sharkster's Avatar
 
Join Date: Oct 2002
Location: san jose, california
Posts: 7,427
Received 84 Likes on 38 Posts
Default

Originally Posted by Randyc151
I mentioned that my dealer had trouble getting both of the factory tips to line up flush with the back of the car as it comes from the factory. Originally, to keep them centered up, one side would fit flush while the other stuck out about 1 inch. We finally decided to just mount both tips sticking out about 1 inch, because I think it looks badass, and way better than factory anyway. I'm confident others can get them both flush with some slight additional work, but I didn't want to keep paying the shop rate for the local dealer to screw with it the rest of the afternoon. $$$


Here's how it looks on my car.
hi randy thanks so much for the feedback and glad you're enjoying it What we have found is that a lot of the tips from the factory have been tightened/clamped down pretty hard on to the stock exhaust and so they almost need to be 'bumped' back up if you will (expanded) in order to go back on the whole outlet
Old 09-03-2015, 11:48 PM
  #36  
Cm09578
Instructor
 
Cm09578's Avatar
 
Join Date: Mar 2013
Posts: 165
Likes: 0
Received 2 Likes on 1 Post
Default

Originally Posted by sharkster
hi randy thanks so much for the feedback and glad you're enjoying it What we have found is that a lot of the tips from the factory have been tightened/clamped down pretty hard on to the stock exhaust and so they almost need to be 'bumped' back up if you will (expanded) in order to go back on the whole outlet
yes, I ran into this on the install...other than that the exhaust sounds amazing! thanks Sharkwerks!
Old 09-05-2015, 02:41 PM
  #37  
CMS
Former Vendor
Thread Starter
 
CMS's Avatar
 
Join Date: Dec 2014
Posts: 771
Received 22 Likes on 19 Posts
Default

Systems in stock for immediate shipping guys.
Old 10-13-2015, 11:46 PM
  #38  
CMS
Former Vendor
Thread Starter
 
CMS's Avatar
 
Join Date: Dec 2014
Posts: 771
Received 22 Likes on 19 Posts
Default

991TT systems back in stock. Let us know how we can help.
Old 10-15-2015, 08:59 PM
  #39  
kyrocks
Rennlist Member
 
kyrocks's Avatar
 
Join Date: Oct 2010
Location: Limassol, Cyprus and DFW, Texas
Posts: 4,636
Received 389 Likes on 204 Posts
Default

Just got mine installed today. It transforms the car!
Old 10-16-2015, 03:03 AM
  #40  
JUPJAI
Burning Brakes
 
JUPJAI's Avatar
 
Join Date: Feb 2006
Location: Canada
Posts: 842
Received 45 Likes on 21 Posts
Default

Just ordered!
Old 10-16-2015, 09:09 AM
  #41  
WCH BOS
Rennlist Member
 
WCH BOS's Avatar
 
Join Date: Jan 2012
Location: Boston
Posts: 404
Received 15 Likes on 12 Posts
Default

I've had my Sharkwerks exhaust on for 4 months and it's exactly what I wanted. No drone but more oomph when you get on it.

I also had some trouble getting the tips to line up and ended up having them stick out like the picture above. I'm sure you could get it to fit flush by opening up the various connections but I didn't have the tools myself and didn't want to pay someone else to play with it since I like the extended look.
Old 10-16-2015, 01:23 PM
  #42  
sharkster
Addict
Rennlist Member


Rennlist
Site Sponsor

 
sharkster's Avatar
 
Join Date: Oct 2002
Location: san jose, california
Posts: 7,427
Received 84 Likes on 38 Posts
Default

Originally Posted by kyrocks
Just got mine installed today. It transforms the car!
That's good to hear mate! I remember you from the 997 gt3 days so thanks for stickin' wit us!
Old 10-20-2015, 04:29 PM
  #43  
CMS
Former Vendor
Thread Starter
 
CMS's Avatar
 
Join Date: Dec 2014
Posts: 771
Received 22 Likes on 19 Posts
Default Porsche 911 Twin TurboS Sharkwerks Installation

Another Sharkwerks TTS exhaust install. We have 1 left in stock. Let us know how we can help
Attached Images         
The following users liked this post:
Levrac68 (11-21-2019)
Old 10-21-2015, 01:58 AM
  #44  
altonj
Pro
 
altonj's Avatar
 
Join Date: Mar 2005
Location: West Coast Canada
Posts: 685
Received 5 Likes on 5 Posts
Default

We just installed one as well. Perfect fit and excellent sound/performance. Customer is thrilled.

Cheers
Old 10-24-2015, 10:53 AM
  #45  
The New 911
Pro
 
The New 911's Avatar
 
Join Date: Oct 2015
Posts: 529
Likes: 0
Received 1 Like on 1 Post
Default

One thing all of these exhaust videos should have is have a Camera in the car with the Windows rolled down and a chase car with a camera, again with the windows rolled downed while Driving Into A Tunnel with a Good Downshift. Now that is sublime. Lots of Tunnels around Berkeley up North in California.


Quick Reply: Sharkwerks 991 Turbo (S) exhaust



All times are GMT -3. The time now is 01:09 PM.