Dragy 1/4 mile test today with the 2019 TTS
#1
Drifting
Thread Starter
Dragy 1/4 mile test today with the 2019 TTS
These cars are crazy fast stock. Backed up yesterday's 2.58 with a 2.59 0 to 60mph too...
#3
Drifting
Thread Starter
Thanks ! I'm still shocked how quick these things are pure stock. My F90 with a tune runs 10.8 at 128mph at the same "strip". It went 11.23 at 124mph pure stock. My stock Z06 went 11.4 at 126mph on a prepped track near "the strip". I hoped the TTS pure stock would match the tuned F90. I was blown away. These cars have bones !
#4
Rennlist Member
Join Date: Aug 2017
Location: Metro Atlanta, GA area
Posts: 7,058
Received 2,011 Likes
on
1,262 Posts
Your 1.60 60Ft. on the street is impressive. Hence the 10.5. Congrats!!!
My 1.86 horrible 60Ft. made my ET slower on the street (spun badly) but the 132.6 mph trap shows I'd be 10.40 - 10.50 with good 60 ft.
Dragy is fun to have.
My 1.86 horrible 60Ft. made my ET slower on the street (spun badly) but the 132.6 mph trap shows I'd be 10.40 - 10.50 with good 60 ft.
Dragy is fun to have.
#5
Drifting
Thread Starter
#6
Rennlist Member
Join Date: Aug 2017
Location: Metro Atlanta, GA area
Posts: 7,058
Received 2,011 Likes
on
1,262 Posts
Decent... It's only the OTS Sgt. 2 - 93 octane Cobb tune and my Europipe.
HP calculator puts it at around 600 WHP with me in the car (race weight). DA was only like 431 though.. Cool out and less than 1000 ft. elevation.
Tune yours and you'll be Right on passed that!! I'm starting out with less, given it's only 530bhp on 997.2TTS's
HP calculator puts it at around 600 WHP with me in the car (race weight). DA was only like 431 though.. Cool out and less than 1000 ft. elevation.
Tune yours and you'll be Right on passed that!! I'm starting out with less, given it's only 530bhp on 997.2TTS's
#7
Rennlist Member
Join Date: Aug 2017
Location: Metro Atlanta, GA area
Posts: 7,058
Received 2,011 Likes
on
1,262 Posts
991.2 TTS curb weight for your car (High side is 3682) plus approx. 200 driver = 3882
I put that into this HP Calculator with your 130.72 Trap speed and it shows your car is making 588 WHP
e
Now depending on options / curb weight and if you weigh less, the WHP would go down a bit. Given it's supposed to be 580bhp, that might be closer if were down a little bit on whp.
I put that into this HP Calculator with your 130.72 Trap speed and it shows your car is making 588 WHP
e
Now depending on options / curb weight and if you weigh less, the WHP would go down a bit. Given it's supposed to be 580bhp, that might be closer if were down a little bit on whp.
Trending Topics
#8
991.2 TTS curb weight for your car (High side is 3682) plus approx. 200 driver = 3882
I put that into this HP Calculator with your 130.72 Trap speed and it shows your car is making 588 WHP
e
Now depending on options / curb weight and if you weigh less, the WHP would go down a bit. Given it's supposed to be 580bhp, that might be closer if were down a little bit on whp.
I put that into this HP Calculator with your 130.72 Trap speed and it shows your car is making 588 WHP
e
Now depending on options / curb weight and if you weigh less, the WHP would go down a bit. Given it's supposed to be 580bhp, that might be closer if were down a little bit on whp.
#9
Rennlist Member
Join Date: Aug 2017
Location: Metro Atlanta, GA area
Posts: 7,058
Received 2,011 Likes
on
1,262 Posts
My last truck made 1053 WHP / 1700 WTQ on the dyno....Then made some passes at the track and used this HP Calc. 10.70 @ 129.4 MPH at 7100 lbs race weight came out to 1044 WHP on the calculator.
#10
That would make sense then. His HP calculator has ALWAYS be spot on for my drag racing traps vs. the dyno jet Dyno pulls on my modded high hp diesel trucks i used to race.
My last truck made 1053 WHP / 1700 WTQ on the dyno....Then made some passes at the track and used this HP Calc. 10.70 @ 129.4 MPH at 7100 lbs race weight came out to 1044 WHP on the calculator.
My last truck made 1053 WHP / 1700 WTQ on the dyno....Then made some passes at the track and used this HP Calc. 10.70 @ 129.4 MPH at 7100 lbs race weight came out to 1044 WHP on the calculator.
Again - we shall see.
#11
Drifting
Thread Starter
That would make sense then. His HP calculator has ALWAYS be spot on for my drag racing traps vs. the dyno jet Dyno pulls on my modded high hp diesel trucks i used to race.
My last truck made 1053 WHP / 1700 WTQ on the dyno....Then made some passes at the track and used this HP Calc. 10.70 @ 129.4 MPH at 7100 lbs race weight came out to 1044 WHP on the calculator.
My last truck made 1053 WHP / 1700 WTQ on the dyno....Then made some passes at the track and used this HP Calc. 10.70 @ 129.4 MPH at 7100 lbs race weight came out to 1044 WHP on the calculator.
I scaled my car. With me in it what does the hp calculate at a total race weight of 3770lbs ?
#12
Rennlist Member
Join Date: Aug 2017
Location: Metro Atlanta, GA area
Posts: 7,058
Received 2,011 Likes
on
1,262 Posts
At 3770 lbs. at 130.72 Trap, it shows you making 571 WHP and 620 BHP. That's probably more like it for a stock TTS at your DA. Still very high but the speed is what it is!
Yes, here's me and my old truck running 10's.
#13
At 3770 lbs. at 130.72 Trap, it shows you making 571 WHP and 620 BHP. That's probably more like it for a stock TTS at your DA. Still very high but the speed is what it is!
Yes, here's me and my old truck running 10's.
http://www.youtube.com/watch?v=9sgubqnDa64&t=65s
http://www.youtube.com/watch?v=iXNpgvNsI2k
Yes, here's me and my old truck running 10's.
http://www.youtube.com/watch?v=9sgubqnDa64&t=65s
http://www.youtube.com/watch?v=iXNpgvNsI2k
571 WHP is 671 HP at 15% drivetrain loss - 648 HP at 12% and 634 HP at 10%. They say the newer cars are more efficient - so either 10 or 12% DTL likely. Either way - it's a solid number.
#14
Rennlist Member
Join Date: Aug 2017
Location: Metro Atlanta, GA area
Posts: 7,058
Received 2,011 Likes
on
1,262 Posts
I agree. His car is Strong!!
Amazing what there new cars are putting out in stock form these days (All brands).
#15