991.2 GT Silver Satin PPF/Nano Coating/Customization
#1
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
991.2 GT Silver Satin PPF/Nano Coating/Customization
This was our final project of 2018 and client gave us a long list of wish lists and we gladly accepted challenge. Project of this scale, and request, requires extreme precision and management. It's a skill we've earned over the past two decades. Specializing in Porsche allows us to make these amazing requests from a client's imagination, a reality. I hope you enjoy the journey as much as we did.
Most projects arrive to our studio, lovingly called The Asylum, via flatbed concierge delivery from dealership, or enclosed trailer from various area of the country. This one was local and arrived safe and sound
Once paint correction is complete, we begin disassembly and cataloging the vehicle, then begin installing ppf, clear bra. In this case, client wanted a satin look, similar to options offered by BMW and Mercedes, but not by Porsche. GT Silver is so stunning, but with matte ppf, it truly becomes enchanting. The metallic fully comes through the satin ppf and paint still looks "alive"
Strategic edges are extended in our software. With matte ppf, extreme attention to detail is given to extensions since NO gloss should be visible
Custom door for a seamless installation around door handle and mirror base
Most will never see behind the scenes. Knowing the project is done with un-paralleled attention-to-detail is satisfying for us and the client. The more functional reason why we obsess over the smallest detail, amazing level of durability and ease of maintenance since there's little to no seams
Custom gas door
At GP, we use DAP from XPEL...arguably the best, and most expensive, pattern software in the industry. Sometimes, patterns aren't suitable for our needs, so we go back to our roots...doing custom installations that started it for us
No detail is too small. These edges MUST be hand trimmed with precision. If you're off by a fraction of mm, the edge of the film will be exposed once the fins are installed back on
Even the carbon fiber door sills are protected and no one would ever know there's ppf on them
Client wanted a few suggestions to make this Turbo S more unique. The bare plastic accents around the 911 didn't quite match the glossy black accents that client optioned. We suggested that all matte plastics be custom painted gloss black to match other various OEM accents. This took tremendous effort to color match, get the overall texture correct, and also to protect with ppf as there was no pattern for these small pieces
Semi-Custom 1-piece 1/4s. The rear 1/4 window and trim are removed for a more seamless and clean installation
Custom Rear bumper
We use OEM emblems. Well-worth the effort considering our goal is to enhance something already new. We invest heavily into proper tooling. We have the entire library of every 991 and 991.2 generation 911
Headlights are also protected against pitting from rock chips
Mirror assembly. The outer cover was GT Silver, gloss. We wanted a SEAMLESS matte look, and only proper way to achieve those results, is to apply a matte clear coat. For an OEM appearance, we separate the mirror into its individual parts, paint each piece, and re-assemble. It's how the factory would do it
First round of this project complete. She'll be back soon for some other amazing upgrades
Custom painted GPS antenna and mirrors
Wheels and calipers nano'd
New gloss accents
All interior surfaces are nano'd giving excellent protection and a richer appearance. This process looks near OEM and doesn't take away new-car smell many enjoy
Most projects arrive to our studio, lovingly called The Asylum, via flatbed concierge delivery from dealership, or enclosed trailer from various area of the country. This one was local and arrived safe and sound
Once paint correction is complete, we begin disassembly and cataloging the vehicle, then begin installing ppf, clear bra. In this case, client wanted a satin look, similar to options offered by BMW and Mercedes, but not by Porsche. GT Silver is so stunning, but with matte ppf, it truly becomes enchanting. The metallic fully comes through the satin ppf and paint still looks "alive"
Strategic edges are extended in our software. With matte ppf, extreme attention to detail is given to extensions since NO gloss should be visible
Custom door for a seamless installation around door handle and mirror base
Most will never see behind the scenes. Knowing the project is done with un-paralleled attention-to-detail is satisfying for us and the client. The more functional reason why we obsess over the smallest detail, amazing level of durability and ease of maintenance since there's little to no seams
Custom gas door
At GP, we use DAP from XPEL...arguably the best, and most expensive, pattern software in the industry. Sometimes, patterns aren't suitable for our needs, so we go back to our roots...doing custom installations that started it for us
No detail is too small. These edges MUST be hand trimmed with precision. If you're off by a fraction of mm, the edge of the film will be exposed once the fins are installed back on
Even the carbon fiber door sills are protected and no one would ever know there's ppf on them
Client wanted a few suggestions to make this Turbo S more unique. The bare plastic accents around the 911 didn't quite match the glossy black accents that client optioned. We suggested that all matte plastics be custom painted gloss black to match other various OEM accents. This took tremendous effort to color match, get the overall texture correct, and also to protect with ppf as there was no pattern for these small pieces
Semi-Custom 1-piece 1/4s. The rear 1/4 window and trim are removed for a more seamless and clean installation
Custom Rear bumper
We use OEM emblems. Well-worth the effort considering our goal is to enhance something already new. We invest heavily into proper tooling. We have the entire library of every 991 and 991.2 generation 911
Headlights are also protected against pitting from rock chips
Mirror assembly. The outer cover was GT Silver, gloss. We wanted a SEAMLESS matte look, and only proper way to achieve those results, is to apply a matte clear coat. For an OEM appearance, we separate the mirror into its individual parts, paint each piece, and re-assemble. It's how the factory would do it
First round of this project complete. She'll be back soon for some other amazing upgrades
Custom painted GPS antenna and mirrors
Wheels and calipers nano'd
New gloss accents
All interior surfaces are nano'd giving excellent protection and a richer appearance. This process looks near OEM and doesn't take away new-car smell many enjoy
__________________
Specializing in Porsche/Ferrari since 1995
Why choose GP...WATCH OUR DOCUMENTARY
Follow Moe HERE
GP Fastrak - Ceramic/PPF/Tint in one simple bundle - Click Here for more info
Specializing in Porsche/Ferrari since 1995
Why choose GP...WATCH OUR DOCUMENTARY
Follow Moe HERE
GP Fastrak - Ceramic/PPF/Tint in one simple bundle - Click Here for more info
Trending Topics
#8
Moe,
This was a wrap. Edges are critical. Do you do the same disassembly on a car getting Xpel PPF?
Great process. You should move to NC and open a shop. I could fill the shop up day one.
Jim
This was a wrap. Edges are critical. Do you do the same disassembly on a car getting Xpel PPF?
Great process. You should move to NC and open a shop. I could fill the shop up day one.
Jim
#9
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Thank you gents for checking thread out. We enjoyed this project very much.
🤙
jim, to clarify, this IS ppf, just matte instead of glossy.
when we do gloss ppf, we can ease back a bit as there’s a bit more wiggle room and we don’t need to cover every small intricate area. I’d say, our normal glossy ppf installation is about 90% of this level of detail...so, not too far off.
when we do gloss ppf, we can ease back a bit as there’s a bit more wiggle room and we don’t need to cover every small intricate area. I’d say, our normal glossy ppf installation is about 90% of this level of detail...so, not too far off.
#12
Rennlist Member
Join Date: Sep 2010
Location: Palm Beach Gardens, FL
Posts: 916
Likes: 0
Received 262 Likes
on
165 Posts
This quality work is obviously very labor intensive and time consuming. Can you please tell us how many man hours this took and what a job like this costs. Thanks for posting these pics.
This pic to me is the most impressive.
This pic to me is the most impressive.
#13
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
#14
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
#15
Drifting
Also, I must say that your video is unbelievably great. I watched it a while ago, and I forgot how truly personal and exceptional it is. Great job.