Got my Blackvue 900 today...looking for example installs
#1
Rennlist Member
Thread Starter
Got my Blackvue 900 today...looking for example installs
The Blackvue is a bit larger than I expected so would love to see some pics of the installation location of some of your forward looking cameras. Also, with you location what are the pros and cons?
Thanks in advance.
Thanks in advance.
#4
Rennlist Member
Thread Starter
Thanks for the pic....With your install does the mirror mounting area show up in the image....it looks like it may due to the closeness of the camera aperture. If not, I will put it in the same place. I also need to make sure that the there is enough room to slide the camera out of the mount.
Finally, one observation when I compare to the viofo the size of the BV is quite big. Kind of like the Viofo form factor better. seems easier to hide behind the mirror. Still I will be putting the BV in my Turbo. Will put Viofo in one of my sedans and then over time compare.
Finally, one observation when I compare to the viofo the size of the BV is quite big. Kind of like the Viofo form factor better. seems easier to hide behind the mirror. Still I will be putting the BV in my Turbo. Will put Viofo in one of my sedans and then over time compare.
Trending Topics
#10
Rennlist Member
Thread Starter
Finished the install of Blackvue 900S....the hardest part was the planning, figuring out where to get switched power and battery power for the Power Magic Pro. Once the power was Magic Pro was installed the rest went really fast.Tha
Installed Power Magic Pro installed in fuse box on passenger side
Used add a circuit for both battery and accessor connection in empty fuse slots. Battery had always hot fuse slot and Accessory was to switched slot
Looks nicely integrated. I am not planning on messing too much with the magic pro so it will be behind the fuse box panel.
Used the BV trim tool which worked great. Ran power up A piller (pulled it off)...it was all pretty easy even wth the rear view camera. WIres do not show anywhere in the install.
BV behind mirror and When driving the camera is blocked out of my view. Camera is aligned to be at the exact center of the car. Still need to clean up the wiring but it all works now.
The rear camera.
Installed Power Magic Pro installed in fuse box on passenger side
Used add a circuit for both battery and accessor connection in empty fuse slots. Battery had always hot fuse slot and Accessory was to switched slot
Looks nicely integrated. I am not planning on messing too much with the magic pro so it will be behind the fuse box panel.
Used the BV trim tool which worked great. Ran power up A piller (pulled it off)...it was all pretty easy even wth the rear view camera. WIres do not show anywhere in the install.
BV behind mirror and When driving the camera is blocked out of my view. Camera is aligned to be at the exact center of the car. Still need to clean up the wiring but it all works now.
The rear camera.
#12
Burning Brakes
Here is an example of the video quality of the Backvue 650 dual in my ML63....I find it quite good..the alarm is the ALP laser jammer doing it's thing ..then I switched it off
#13
Finished the install of Blackvue 900S....the hardest part was the planning, figuring out where to get switched power and battery power for the Power Magic Pro. Once the power was Magic Pro was installed the rest went really fast.Tha
Installed Power Magic Pro installed in fuse box on passenger side
Used add a circuit for both battery and accessor connection in empty fuse slots. Battery had always hot fuse slot and Accessory was to switched slot
Looks nicely integrated. I am not planning on messing too much with the magic pro so it will be behind the fuse box panel.
Used the BV trim tool which worked great. Ran power up A piller (pulled it off)...it was all pretty easy even wth the rear view camera. WIres do not show anywhere in the install.
BV behind mirror and When driving the camera is blocked out of my view. Camera is aligned to be at the exact center of the car. Still need to clean up the wiring but it all works now.
The rear camera.
Installed Power Magic Pro installed in fuse box on passenger side
Used add a circuit for both battery and accessor connection in empty fuse slots. Battery had always hot fuse slot and Accessory was to switched slot
Looks nicely integrated. I am not planning on messing too much with the magic pro so it will be behind the fuse box panel.
Used the BV trim tool which worked great. Ran power up A piller (pulled it off)...it was all pretty easy even wth the rear view camera. WIres do not show anywhere in the install.
BV behind mirror and When driving the camera is blocked out of my view. Camera is aligned to be at the exact center of the car. Still need to clean up the wiring but it all works now.
The rear camera.