Closest wrap color to Mexico?
Didn't get PTS so looking for the closest match in film to Mexico? The Very Light Blue 632 looks extremely close. anyone with any direct knowledge?
|
|
Take a look at this site.
https://www.fellers.com/avery/cat/av...-wrapping-film The 677 blue is very close to Riviera Blue so darker than Mexico. You can order swatches to compare. |
3 Attachment(s)
This is gloss blue (avery dennison) In low light, very blue. In direct sunlight, close to mexico. My calipers are mexico.
The top pic is edited, but the other 2 are natural. |
Just to clarify - Rivi is lighter than Mex.:bigbye:
Originally Posted by RobT 394
(Post 13820687)
Take a look at this site.
https://www.fellers.com/avery/cat/av...-wrapping-film The 677 blue is very close to Riviera Blue so darker than Mexico. You can order swatches to compare. |
if you had samples I could take photos with them up against my car....
|
Thanks guys. Found Mex Blue analogue. Having dealer disassemble car for 4 days process then put back together. Saw a Huracan and R8 that were wrapped and you couldn't even tell it was a wrap after 20 minutes of inspection!!
|
1 Attachment(s)
What i did was actually print the blue rather than picking a stock colour. As at the time the colours where very limited.
Attachment 1195657 |
Pazzo009 -Approx cost to do the car?
THX |
4-5k to do it right.
|
↑↑↑ Cheaper than a new car THX
|
You mean a 300k PTS Mexico Blue RS? :)
|
Originally Posted by rosenbergendo
(Post 13823095)
4-5k to do it right.
|
Originally Posted by Hothonda
(Post 13823091)
Pazzo009 -Approx cost to do the car?
THX
Originally Posted by rosenbergendo
(Post 13823095)
4-5k to do it right.
I must say though, the vinyl is very delicate and I'm a fanatic. My next thing is to do a matte or satin expel over the whole thing...But it would be another $4000 probably. |
All times are GMT -3. The time now is 11:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands