FVD Brombacher "Full" Cat-Back Exhaust!
#31
Rennlist Member
Matt, Hope to hear the results of your quest in four weeks.
#32
Rennlist Member
See, I demonstrated my incompetence by not even being able to properly articulate my question!!
I just want to know how easy it is to install the 3 pieces in the pics you posted at the start of this thread. Didn't realize that the first two are side mufflers.
I look forward to seeing how your install goes! No bumper removal?!?!?! Wow, that makes it even better!!!
I just want to know how easy it is to install the 3 pieces in the pics you posted at the start of this thread. Didn't realize that the first two are side mufflers.
I look forward to seeing how your install goes! No bumper removal?!?!?! Wow, that makes it even better!!!
#35
It didn't cost me that much more to get a completed center section. I know its shocking, but I'm super **** and like things to be a certain way. I was going to just cap the SW bypass, but asked if they could make me a specific center section. It will be cost neutral when I sell the SW.
I highly doubt this is going to sound much different than using the SW or GMG with caps on the top inlets.
I highly doubt this is going to sound much different than using the SW or GMG with caps on the top inlets.
#36
RL Community Team
Rennlist Member
Rennlist Member
I can't wait for tonight.
Hope it turns out to Matt's satisfaction.
For various reasons, I'd feel awfully bad if it didn't.
Hope it turns out to Matt's satisfaction.
For various reasons, I'd feel awfully bad if it didn't.
#40
Rennlist Member
Thread Starter
I finished install about an hour ago. It raining, so I only took a short, safe trip.
My first impressions are that it's pretty darn good. I'm not sure yet if it's benchmark good, but I certainly like it. It is a little deeper sounding and no drone. It was pouring, so I couldn't put the windows down. I'll have more seat time tomorrow and over the weekend.
Install took me about 4 hours. I did have to remove the rear bumper. In my haste to get out and test the exhaust, I forgot to plug the stupid license plate lights back in!
I have a crap load of photos and video to put up. I'll also be making a bunch of videos in and out of the car to capture the sound. Please bare with me. I think I've reached the wife's limit of tolerance having done the GMG Rollbar and then exhaust today. Oh, and like 10 boxes of detailing supplies have shown up in the past week or so. I need to slow my roll a bit otherwise I may end up on living in my car.
My first impressions are that it's pretty darn good. I'm not sure yet if it's benchmark good, but I certainly like it. It is a little deeper sounding and no drone. It was pouring, so I couldn't put the windows down. I'll have more seat time tomorrow and over the weekend.
Install took me about 4 hours. I did have to remove the rear bumper. In my haste to get out and test the exhaust, I forgot to plug the stupid license plate lights back in!
I have a crap load of photos and video to put up. I'll also be making a bunch of videos in and out of the car to capture the sound. Please bare with me. I think I've reached the wife's limit of tolerance having done the GMG Rollbar and then exhaust today. Oh, and like 10 boxes of detailing supplies have shown up in the past week or so. I need to slow my roll a bit otherwise I may end up on living in my car.
#42
Rennlist Member
Bar and exhaust in one day? That's a big day. Looking forward to your report.
#43
Race Director
Matt - please advise what you did. Did you install their side mufflers with their bypass?
What did you think about their side mufflers? Fit and finish good?? Better than OEM side mufflers?
What did you think about their side mufflers? Fit and finish good?? Better than OEM side mufflers?