View Poll Results: Which color would you order for your .2 GT3?
Black
27
2.96%
White
81
8.88%
Guards Red
73
8.00%
Racing Yellow
26
2.85%
Carrara White Metallic
30
3.29%
Jet Black Metallic
14
1.54%
Graphite Blue Metallic
56
6.14%
Rhodium Silver
14
1.54%
Sapphire Blue Metallic
48
5.26%
Agate Grey Metallic
31
3.40%
GT Silver Metallic
105
11.51%
Carmine Red
50
5.48%
Chalk / Crayon
112
12.28%
Lava Orange
24
2.63%
Miami Blue
97
10.64%
PTS, or take this allocation and shove it!
124
13.60%
Voters: 912. You may not vote on this poll
.2 GT3 COLOR POLL
#571
I've ordered mine in GR with platinum wheels and platinum stitching (leather int). Since I also chose 12 marker and red seat belts I thought red stitching was too much. Hope it'll look good in the end.
#572
Race Director
The problem with the .2 GT3 is you get that silver stripe down the seat and with GR exterior it will look awkward
#574
Race Director
#576
Race Director
Originally Posted by Freddie81
Since it's apparently quite easy to change the pads in the seats, getting another set made in some nice custom way could be an alternative then.
#577
Rennlist Member
That's what quite a few of us did. I have red and black pepita LWB inserts in one car, and if the GT3 comes through, im think corduroy inserts this go around... my position is quite up in the air so I don't want to ginx it, but my secret hope is for a PTS Brewster with black wheels, which I'll go full old school on with corduroy or plaid LWB inserts.
#578
Race Director
Originally Posted by Nacelle
That would look very sharp, hope you get PTS
#581
That's what quite a few of us did. I have red and black pepita LWB inserts in one car, and if the GT3 comes through, im think corduroy inserts this go around... my position is quite up in the air so I don't want to ginx it, but my secret hope is for a PTS Brewster with black wheels, which I'll go full old school on with corduroy or plaid LWB inserts.
#582
I must say if they raised price this much it's not worth it to me. I don't have that one color that I could really "die for". I checked with a company here in Sweden who did one of the 991 RS with the worn out Martini livery floating around early online and this cost approx 2500 USD. 1 color about 2000 USD for a 991 GT3. Could also be an alternative. Or just enjoy GR with a see through bra
Btw saw these rendered images of new GT2 RS in Dark Sea blue on IG. That looks like an amazing color!
Last edited by Freddie81; 07-06-2017 at 03:46 AM.
#583
Burning Brakes
That's what quite a few of us did. I have red and black pepita LWB inserts in one car, and if the GT3 comes through, im think corduroy inserts this go around... my position is quite up in the air so I don't want to ginx it, but my secret hope is for a PTS Brewster with black wheels, which I'll go full old school on with corduroy or plaid LWB inserts.
Btw, the alu wheels weren't a consideration with Brewster ?
#584
Race Director
Originally Posted by Oldmxnut
Nice spec....Good to see a few greens coming out of the woodwork. I'm going Irish green but was considering the CXX option for interior to remove the stripe. But thinking, all theses items just keep adding up, so your suggestion is worth looking into. LWB shouldn't be too hard to redo ?
Btw, the alu wheels weren't a consideration with Brewster ?
Btw, the alu wheels weren't a consideration with Brewster ?
Regarding Those seat pads on LWB which can be reupholstered for $500 in any material you want.. that CXX option is $8500?.. I know you get all sorts of leather changes etc but, it's just a GT3.. I don't mean that in a derogatory way of course, just that once you get the Msrp into RS territory then maybe you get an RS. Trying to keep spec under $170k makes sense to me. Just my own personal judgement of course.
#585
Three Wheelin'