super happy with those bolters. The stitching is a perfect match. Interestingly .1 bolster must be bigger/longer than the .2 bolster because I can’t get a tight fit with the bolster covers. Seems like there is some slight excess length when trying to fit them on my 2018 https://cimg5.ibsrv.net/gimg/rennlis...462dd1969.jpeg ‘18 passenger side https://cimg6.ibsrv.net/gimg/rennlis...7a4a4daf1.jpeg ‘18 driver side |
https://cimg9.ibsrv.net/gimg/rennlis...ab626e87a7.png Fitment on a .1 bucket (from the instruction photos) |
Originally Posted by Buddhamonk
(Post 15099070)
https://cimg9.ibsrv.net/gimg/rennlis...ab626e87a7.png Fitment on a .1 bucket (from the instruction photos) I need to do a video or a pictorial As per the install picture ( of old) the new leather is a bit softer and so it goes back a little more As for the back piece ... it looks a bit long and a little to tight hence the wrinkles ? |
https://cimg0.ibsrv.net/gimg/rennlis...ad0d82cb6.jpeg No worries. Looks perfect from the outside. |
Originally Posted by Buddhamonk
(Post 15099160)
https://cimg0.ibsrv.net/gimg/rennlis...ad0d82cb6.jpeg No worries. Looks perfect from the outside. :thumbsup: |
Is there a trick to getting the front piece a little tighter underneath the "grip handle?" Mine is also a little long on my 2018 and is bunching up quite a bit by the seatbelt passthrough and the top edge seems to be about one cm too long and is starting to wrinkle because it is folding down.
|
These look great. I am going to order a set today eddie, order incoming!
|
Originally Posted by richardbf
(Post 15202997)
These look great. I am going to order a set today eddie, order incoming!
Got it ... going out next week :thumbsup: regards Ed |
Let me know when you have the Lizard green ones ready. |
Originally Posted by TRAKCAR
(Post 15210764)
Let me know when you have the Lizard green ones ready. I need to know whether you need stitching on the small rear pieces ? Regards Ed |
What are the small rear pieces? i now have (orange stitch) side bolster left and right and one head feast protection piece. email me, so I don’t forget to do this please. |
Originally Posted by TRAKCAR
(Post 15210775)
What are the small rear pieces? i now have (orange stitch) side bolster left and right and one head feast protection piece. email me, so I don’t forget to do this please. It’s dicpicted in the pict on the right in the 1st page of this thread ... That pict shows stitching on the rear piece .... The pict on the left has no stitching on the rear piece yes we did lava orange on your first set but I don’t remember if we did stitching on the rear pieces regards Ed |
Email sent.
Look forward to dealing with you Ed! |
Hey Eddie... my GT4 is going to a new home and along with it are your excellent covers. They did their job!
PM coming for a new set for my PTS GT3! |
eddie, will you be making these with the lizard green stitching?
|
All times are GMT -3. The time now is 01:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands