When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
TechArt GT3 RS Carbon fender Vents // TAG Motorsports
Our friends at TechArt are always raising the bar as to what you can do to your Porsche and this particular modification is another perfect example of it.
Introducing the TechArt Carbon Fiber Fender Vents for your 991 GT3RS. These Carbon Fiber covers, or add-ons the factory slats giving them a very clean and classy look and matching the rest of the carbon on the vehicle.
Available in both Gloss and Matte Carbon Finish. For more information click HERE or shoot us a PM
Would be perfect to mate these to the TechArt Carbon Side Carbon Vent Inserts as well! Click HERE for more information on the side vents or shoot us a PM
These pieces actually fit and REPLACE the factory pieces, they dont stick on. The factory slats come apart as you can see in the images.
This is not correct. I have the full Techart kit on my RS and the front carbon slat pieces are shipped from Techart with a special 3M adhesive epoxy that you use to stick the carbon pieces on top of the standard plastic vent slats. Regardless they look fantastic and much better than the vinyl carbon.
This is not correct. I have the full Techart kit on my RS and the front carbon slat pieces are shipped from Techart with a special 3M adhesive epoxy that you use to stick the carbon pieces on top of the standard plastic vent slats. Regardless they look fantastic and much better than the vinyl carbon.
That does look good!
What other bits do you have on the car and do you have any more pics? Did you fit the fender vent pieces yourself and what is involved?
Did you install yourself?
Did you remove vents to install?
Thanks
I just removed the plastic grid under the vents during the install. No need to remove the front wheel either, just jack the car to give access from the top and bottom of the vents
I just removed the plastic grid under the vents during the install. No need to remove the front wheel either, just jack the car to give access from the top and bottom of the vents
TechArt has always made very nice decorative as well as functional parts. In the case of these vent add-ons, will the debris coming out of the vents ruin the nice carbon look.
03-11-2016, 08:49 PM
TechArt GT3 RS Carbon fender Vents // TAG Motorsports
. Not as good as the real one but good enough for me
