Joe731

I am looking at 19" wheel options for the RS.

My current understanding is that HRE makes a wheel that fits, but are there others?

The GT3RS and the GT3 both w/steel brakes have the same calipers and rotors, but the offsets appear to be different, so I am not sure everything that fits on a GT3 will fit on an RS.

Ideally, I would like to stay with 9.5 and 12.5 widths and stock offsets, just in 19" wheels

For reference stock on each are as follows:

RS Front: 9.5 x 20 50mm offset Rear: 12.5 x 21 48mm offset
3 Front: 9.0 x 20 55mm offset Rear: 11.0 x 20 47mm offset

Anyone running 19's with anything other than HRE? HRE, feel free to show off your wheels here.

Seth Thomas

Forgeline has a 19" option for the RS. I chatted with them about the new GE1 wheels in a 19". They could do it had the figment ready. I chose to got with the stock wheel size option due to worry of tire size by downsizing the wheels.

batmanm3

GMG did it with the LO RS at Thermal...
19" with wider than stock hoosiers, but over Brembo rotors , hats, and pads

I think the 19" would be the best for performance tires (lighter weight, better /sticker / cheaper rubber)...

I'm hoping that someone will run 19" over PCCB and hoosiers...

batmanm3

Found the thread

https://rennlist.com/forums/991-gt3-...nd-rs-s-3.html

Joe731

Thanks Battmann. Yes, I talked with GMG. Those were HRE's and HRE does have a good solution.

At this point I am trying to gather other options and pricing.

btrapps

I have a regular GT3 and love the look of that 19" setup that HRE posted recently. The car looks lower than normal though but I love the way the 19's fill out the fenders. I'm interested in what you guys find out.

GMP Performance

We carry quite a few options for 19" wheels on the 991 RS. I'll shoot you some details and pricing!

batmanm3

Please PM me options, offsets, widths, and prices for 19" wheels that will fit over 410 mm PCCB ...

Bonus if wider Hoosiers or other tires will fit.

Please advise if any rubbing or alteration is needed.

Thanks

Tom Tweed

If these are supposed to be stock 991 GT3 wheel sizes and offsets, they are incorrect. The specs are actually, Front: 9.0 x 20" ET 55mm and Rear: 12.0 x 20" ET 47mm, AFAIK.

TT

HRE Wheels

Hi Joe,
Please let us know if you have any further questions regarding any HRE options for your RS.

Mech33

Barf.

mooty

really, could HRE or GMG or anyone else put a set of 19" on an actual RS with tire and alignment spec.
nothing fit until it fits.
offset on paper is meaningless.
i have a lot of wheels that are supposed to fit various cars but they dont.
and what rubber size and brand will be used with said 19"

mooty

19" all around? i talked to them today, answer was no. maybe i need hearing aid

GMG: to run 19", is it 19" all around or 19 and 20? can it work with oe caliper or must it be brembo?

pls list all available option by brand, model, width, dia, offset.

see above.
we have your 20/21 on our RS, the first set you made. now you have 19" pls do tell

HRE Wheels

Mooty, please see this link: https://rennlist.com/forums/991-gt3-...nd-rs-s-3.html

This is an actual RS with 19" HREs, tires on a track setup...

HRE Wheels

The LO 991 GT3 RS features a full GMG WC Track Package which consists of 19" HRE wheels and Hoosier R7's, along with their upgraded Brembo Brake Package (rotors/hats/pads).

More info here: https://rennlist.com/forums/991-gt3-...-and-rs-s.html