When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hopefully this one will make you feel better. My plebeian Southern California suburban 400sqft garage packed to the gills with my 911, the wife's daily driver, my KTM 530EXC-R (Tucked behind the Porsche), my FJR1300 and the wife's quad! (My truck and the lemon's race car get to live outside.)
That looks larger than 400 sq. ft. (or 20'x20' square)! Are you sure?
I've got a mid-80's "build them tract homes as fast as you can" SoCal house with a 19x21 garage and it's nowhere as close to as large as yours..... not sure I can fit my tool drawer unit and the RS length-wise together while still closing the garage door (as you have done).
That looks larger than 400 sq. ft. (or 20'x20' square)! Are you sure?
I've got a mid-80's "build them tract homes as fast as you can" SoCal house with a 19x21 garage and it's nowhere as close to as large as yours..... not sure I can fit my tool drawer unit and the RS length-wise together while still closing the garage door (as you have done).
Very sure. When I bought the house it had no finished walls or ceiling so I did a lot of work. Note that 20x20 are the dimensions of the floor and the walls are on concrete feet so I suppose it adds about 4" in each direction once you get 3" off the ground. The roll up door is exactly 17' wide. I planned everything out using a 3D modeling software. It's cozy for sure and parking needs to be precise. The Volt is exactly 15 feet long and the 997 is 4" shorter. The work bench and tool chests are only about 24-30" deep.
pls hit up Aaron on RL cant remember his handle but he is the one selling the custom painted S works shiv
you need to buy some alum prints off him and make your sterile garage better looking
'
Aaron can be reached at mile2424. I bought a 935 print but haven't gotten it yet cause garage is still under construction. Can't wait!
Aaron can be reached at mile2424. I bought a 935 print but haven't gotten it yet cause garage is still under construction. Can't wait!
Thanks for the kind words Mooty and Greg. Sorry haven't check this thread in a while, but if anyone is interested please send me a DM or shoot me an email. Love helping you guys in any way I can with these amazing garages.
Very sure. When I bought the house it had no finished walls or ceiling so I did a lot of work. Note that 20x20 are the dimensions of the floor and the walls are on concrete feet so I suppose it adds about 4" in each direction once you get 3" off the ground. The roll up door is exactly 17' wide. I planned everything out using a 3D modeling software. It's cozy for sure and parking needs to be precise. The Volt is exactly 15 feet long and the 997 is 4" shorter. The work bench and tool chests are only about 24-30" deep.
Thanks much! I'm going to re-measure this weekend once I'm home. LOL!
[QUOTE=joejenie;15794600]Garage is almost complete except cabinetry, art and maybe 2 lifts so I can get 6 cars in here. Time to go shopping for cars! [/Q
[QUOTE]
04-12-2019, 11:57 AM
Time to go shopping for cars! 
