picture of your garage
#1876
Burning Brakes
a few more pics. The RS is safe in my office warehouse
#1877
Burning Brakes
A close up of the tile going on the floor in the garage. This is the area for the Utility sink and hoses.
#1878
Burning Brakes
A pic of the door install.
#1879
Drifting
#1881
#1882
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
nice! cant wait to see it done
they should hire you to do late night show.
i am pretty certain my entire house can fit in your garage.
thx
hopper = bathroom
brickhouse = bathroom
head = bathroom
sam = unisex name
alex = unisex name
you have no idea how hard it was for me to figure all that out when i moved here. and now i am still messed up with the language.
2 tires missing. my 3500 dually is apparently too small.... i am looking to buy a 18 wheeler no, i dont know how to drive those. but i figured if i hit anything, most likely i will win. so stay the hell out of my way
they should hire you to do late night show.
Making progress on my Build. Doors being installed. Full Bathroom almost done. Electrician getting ready for the HVAC install on Tuesday. Tile guys making headway, can't tile garage till upstairs mezzanine and movie theatre is framed.
Current dimensions of garage portion, 50'x40', Doors are 10'x10'(2), 10'x18'(1), 9'x9'(4).
Current dimensions of garage portion, 50'x40', Doors are 10'x10'(2), 10'x18'(1), 9'x9'(4).
thx
hopper = bathroom
brickhouse = bathroom
head = bathroom
sam = unisex name
alex = unisex name
you have no idea how hard it was for me to figure all that out when i moved here. and now i am still messed up with the language.
2 tires missing. my 3500 dually is apparently too small.... i am looking to buy a 18 wheeler no, i dont know how to drive those. but i figured if i hit anything, most likely i will win. so stay the hell out of my way
#1885
Burning Brakes
What is hard to tell from the pictures is that the springs are 10" in diameter and almost 4' long, the center door needed 4 of these torsion springs.
I am embarrassed to say how much this door set up cost, because it amounts to what some guys spend on their entire build over on the garage journal forum.
Yes, I have used them in the past and they work great. Because of my torsion spring set up it was not a problem. But, I also added additional manual deadbolt latches which you can put a shackle through for additional security.
#1886
Burning Brakes
I will post up the prints.
#1887
Drifting
This was also a concern of mine, I wanted all the doors to match my front door. Because of the size of the doors and that I wanted them fully insulated including double pane privacy glass at the top, I had to go with a full commercial setup and fully custom doors. This allowed me to have them match my front door and all door colors to be the same. The other entry doors will be stained to match the garage doors.
What is hard to tell from the pictures is that the springs are 10" in diameter and almost 4' long, the center door needed 4 of these torsion springs.
I am embarrassed to say how much this door set up cost, because it amounts to what some guys spend on their entire build over on the garage journal forum.
What is hard to tell from the pictures is that the springs are 10" in diameter and almost 4' long, the center door needed 4 of these torsion springs.
I am embarrassed to say how much this door set up cost, because it amounts to what some guys spend on their entire build over on the garage journal forum.
Last edited by nuvolari612; 12-22-2016 at 11:36 PM.
#1889
Drifting
#1890
Burning Brakes
I'm braced send me a pm - matching current is silly $ wish I never put them in width got smaller cars make it by less than 2 inches but if it's approved need a like lift door to submit. New doors will be 9 x 9 matching back garage doors anyone doing carriage doors pm me don't want to bore everyone short story PIA!