19" wheels over PCCB
03-12-2015, 11:03 PM
#1
Rennlist Member
Thread Starter
19" wheels over PCCB
Thought you guys might be interested in this. Was dropping car off for oil change and they were working on this really sweet blue 991. Putting cup mono ***** everywhere and balancing, etc.
The kicker were these HRE wheels, they look REALLY nice, aggressive motorsport type wheel, the inner bead mount is knurled too to keep tires from slipping, and are 19" and fit over the PCCB setup:
The kicker were these HRE wheels, they look REALLY nice, aggressive motorsport type wheel, the inner bead mount is knurled too to keep tires from slipping, and are 19" and fit over the PCCB setup:
03-12-2015, 11:41 PM
#4
Wow I need to see these. Can't wait to hear how these do on the track. Will the rotors touch? not much room to play with...
03-12-2015, 11:43 PM
#5
Rennlist Member
Join Date: Sep 2014
Location: City of Lost Angels
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
I saw your car when I was getting my pipes installed. It's absolutely perfect.
/threadjack.
Yeah, they showed me the replacement hardware that frees up enough room in the barrel to squeeze the 19's in. I'm wondering if they'll be able to fit a set of 3 piece wheels...
Josh
/threadjack.
Thought you guys might be interested in this. Was dropping car off for oil change and they were working on this really sweet blue 991. Putting cup mono ***** everywhere and balancing, etc.
The kicker were these HRE wheels, they look REALLY nice, aggressive motorsport type wheel, the inner bead mount is knurled too to keep tires from slipping, and are 19" and fit over the PCCB setup
The kicker were these HRE wheels, they look REALLY nice, aggressive motorsport type wheel, the inner bead mount is knurled too to keep tires from slipping, and are 19" and fit over the PCCB setup
Josh
03-13-2015, 12:00 AM
#6
Rennlist Member
I spoke with BBI about this earlier..
We had HRE make a custom set of wheels for us after taking measurements. To make them fit, we had to do the following:
In the rear, we changed the bolts in the control arms.
In the front, we had to upgrade to our adjustable thrust arms and bushings from our BBI Street Cup suspension package:
In the rear, we changed the bolts in the control arms.
In the front, we had to upgrade to our adjustable thrust arms and bushings from our BBI Street Cup suspension package:
Trending Topics
03-13-2015, 01:55 AM
#9
Rennlist Member
Thread Starter
some info posted below, if i can get some pics or see it i'll snap them, they are HRE wheels though, maybe they can chime in. i'll get more info from shop when i'm back in there.
where at? ax?
03-13-2015, 03:21 AM
#11
Former Vendor
I saw your car when I was getting my pipes installed. It's absolutely perfect.
/threadjack.
Yeah, they showed me the replacement hardware that frees up enough room in the barrel to squeeze the 19's in. I'm wondering if they'll be able to fit a set of 3 piece wheels...
Josh
/threadjack.
Yeah, they showed me the replacement hardware that frees up enough room in the barrel to squeeze the 19's in. I'm wondering if they'll be able to fit a set of 3 piece wheels...
Josh
Front: HRE R101 Satin Black 19x9.5 Pirelli P Zero Trofeo R 265/35/19
Rear: HRE R101 Satin Black 19x12 Pirelli P Zero Trofeo R 325/30/19
Below are also some photos of the GT3 with the R101s in action at Willow Springs earlier this week (thanks to Jason Zammit of PCALA for the photos). This car, in addition to BBI, will also be at Sunday's PCAOCR-AutoX at El Toro if anyone is interested in seeing it perform in person. We will also have more photos to document the fit and overall look of the wheels on the car next week.
As always, if anyone has any questions, please let us know!
Last edited by HRE Wheels; 04-20-2015 at 01:35 PM.
03-13-2015, 01:31 PM
#14
Three Wheelin'
