Yellow Fever!
03-14-2015, 01:56 PM
#48
Three Wheelin'
Thread Starter
you can always plastidip them matte black.
see Reidry's "So Brite" thread ---he went from platinum to black
https://rennlist.com/forums/991-gt3/...o-brite-3.html
I've done this from Grey to black on my ZR1 rims and it both protects them from chips and minor scrapes at the track and gives them a different look
100% reversible too if you decide you don't like it or mess up the application
Cheap too! I bought 4 cans and only used 2 for all 4 wheels.....$8.99 a can online
see Reidry's "So Brite" thread ---he went from platinum to black
https://rennlist.com/forums/991-gt3/...o-brite-3.html
I've done this from Grey to black on my ZR1 rims and it both protects them from chips and minor scrapes at the track and gives them a different look
100% reversible too if you decide you don't like it or mess up the application
Cheap too! I bought 4 cans and only used 2 for all 4 wheels.....$8.99 a can online
03-15-2015, 08:58 PM
#50
Three Wheelin'
The Porsche flag is signed by every Porsche driver from the 2014 and 2015 Rolex 24 in addition to Hurley Haywood, Jochen Mass and Hartmut Kristen.
Check my "So Brite" thread, I've put another picture of a different part of our garage where we have a 991 GT America bumper on display.
Ryan
03-21-2015, 07:26 PM
#55
Car looks great. Pardon my ignorance but I can't seem to tell the difference between 997 logo and 991. Seems to be a common thing to change. How is it different?
03-21-2015, 08:25 PM
#58
Three Wheelin'
Thread Starter
If you remove the P O R S C H E and just leave the GT3, it is too small and not centered on the bumper.
see below....
991 GT3 emblem (too small) on red---997 emblem (just right) on white
another white 991 with centered 997 GT3 logo
white 991 with 991 GT3 logo not centered
03-21-2015, 09:52 PM
#60
Thank you. Makes sense.