To PCCB or not PCCB
#76
I wish I hadn't seen this. Now take my money!!!
#77
"I wish I hadn't seen this. Now take my money!!!"
Sadly that is exactly what Movit did to me, took my money.
I ordered CER rotors for my 997.2 C2S PCCB equipped car in February 2013.
I haven't received them yet !!!
I have found out that Movit went chapter eleven in November 2012 and was under a new investor in January, but still they throw the ball at the attorney's handling the situation.
So one year on €6.000 lost and no rotors so have had to fork out for Porsche OEM PCCB rotors.
They won't return my money or send me a product.
So be very carefull with Movit, I would NOT part with my money before I was holding the product in my hands.
Sadly that is exactly what Movit did to me, took my money.
I ordered CER rotors for my 997.2 C2S PCCB equipped car in February 2013.
I haven't received them yet !!!
I have found out that Movit went chapter eleven in November 2012 and was under a new investor in January, but still they throw the ball at the attorney's handling the situation.
So one year on €6.000 lost and no rotors so have had to fork out for Porsche OEM PCCB rotors.
They won't return my money or send me a product.
So be very carefull with Movit, I would NOT part with my money before I was holding the product in my hands.
#78
"I wish I hadn't seen this. Now take my money!!!"
Sadly that is exactly what Movit did to me, took my money.
I ordered CER rotors for my 997.2 C2S PCCB equipped car in February 2013.
I haven't received them yet !!!
I have found out that Movit went chapter eleven in November 2012 and was under a new investor in January, but still they throw the ball at the attorney's handling the situation.
So one year on €6.000 lost and no rotors so have had to fork out for Porsche OEM PCCB rotors.
They won't return my money or send me a product.
So be very carefull with Movit, I would NOT part with my money before I was holding the product in my hands.
Sadly that is exactly what Movit did to me, took my money.
I ordered CER rotors for my 997.2 C2S PCCB equipped car in February 2013.
I haven't received them yet !!!
I have found out that Movit went chapter eleven in November 2012 and was under a new investor in January, but still they throw the ball at the attorney's handling the situation.
So one year on €6.000 lost and no rotors so have had to fork out for Porsche OEM PCCB rotors.
They won't return my money or send me a product.
So be very carefull with Movit, I would NOT part with my money before I was holding the product in my hands.
Please forward me your information and I will personally assist you in getting your order.
#79
My Invoice no. 13-46064 dated 15.02.2013 ordered through Hussien Chahrour.
In April I was told the following by Karin Huber:
I'm
sorry for late answering.
The production of your replacement is retarding, because we’ve problems with one of our supplier.
We would ask you for some patience – I will inform you as soon as possible
Then a lot of mails back and forth
And the last one is from December:
sorry for late answering.
I’ve asked more than once to get an answer what happened after your payment of 26th February 2013 on invoice no. 13-46064 of 15.02.13 about 5.170,70 €.
In the time during the insolvency of the old MOV’IT company the insolvency agents Mr. Pehl and Mr. Ball were responsible for all
business operations.
Please contact the insolvency agency to get more informations:
Schultze & Braun GmbH
Herr Pehl / Herr Ball
Eisenbahnstr. 19-23
D-77855 Achern
Germany
So I am quite angry with them, I even offered them to send me a CER kit for my M3 CSL instead of returning my money.
So I ended up buying OEM PCCB rotors back in September and have now sold the 997 in exchange for my 991 GT3.
But please do help, I am at the end of the line in patience and if they don't step up soon I will start spilling my knowledge of how I have been treated as many places as I can possibly think of to make sure others won't be caught by them and loose their hard earned money
In April I was told the following by Karin Huber:
I'm
sorry for late answering.
The production of your replacement is retarding, because we’ve problems with one of our supplier.
We would ask you for some patience – I will inform you as soon as possible
Then a lot of mails back and forth
And the last one is from December:
sorry for late answering.
I’ve asked more than once to get an answer what happened after your payment of 26th February 2013 on invoice no. 13-46064 of 15.02.13 about 5.170,70 €.
In the time during the insolvency of the old MOV’IT company the insolvency agents Mr. Pehl and Mr. Ball were responsible for all
business operations.
Please contact the insolvency agency to get more informations:
Schultze & Braun GmbH
Herr Pehl / Herr Ball
Eisenbahnstr. 19-23
D-77855 Achern
Germany
So I am quite angry with them, I even offered them to send me a CER kit for my M3 CSL instead of returning my money.
So I ended up buying OEM PCCB rotors back in September and have now sold the 997 in exchange for my 991 GT3.
But please do help, I am at the end of the line in patience and if they don't step up soon I will start spilling my knowledge of how I have been treated as many places as I can possibly think of to make sure others won't be caught by them and loose their hard earned money
#81
It is true that MovIt went through a bankruptcy last year and there is a new investor in place. The original owner is still in place. I will send this information off to him and seek a resolution for you.
We have processed dozens of order since the insolvency took place, al be it with a few delays all the orders I proceed have been carried through. I will assist you in accomplishing the same.
I want to apologize for this situation and I want to apologize to the OP for hijacking the thread. Please email me directly with all the information and your contact information. Once we take care of this you can return to the thread and tell all that your problem has been handled to your satisfaction. Now that the 997 GT3 is gone also please tell me how we can handle this.
We have processed dozens of order since the insolvency took place, al be it with a few delays all the orders I proceed have been carried through. I will assist you in accomplishing the same.
I want to apologize for this situation and I want to apologize to the OP for hijacking the thread. Please email me directly with all the information and your contact information. Once we take care of this you can return to the thread and tell all that your problem has been handled to your satisfaction. Now that the 997 GT3 is gone also please tell me how we can handle this.
#82
Rennlist Member
#85
i am currently using alcon ceramic rotors on my 997.2 gt3. They are made by surface transforms, the company that makes movit's rotors also. The ones I run are 390mm fronts and 360mm rears. That means the calipers have to be bumped out with 5mm spacers. But that is the only change necessary. Im using pagid rsc-1 pads. Have done two track weekends with the setup so far. They feel pretty darn good, basically the same weight savings as oem pccb's and a helluva lot cheaper. Will they last forever? Of course not, nothing does. But hopefully they will last long enough to justify the cost when the unsprung weight advantage is considered.
#86
alcon sells a ceramic rotor option for 997 GT3's. The rotors are made by surface transforms who supplies rotors to movit as well. Movit seems to offer more size options than alcon. Actually surface transforms sells them as well. Google them. You will find it easily. Maybe they will make 991 options soon. I like my Alcons so far. The feel is good, i am happy to have made the car 40 lbs lighter in unsprung weight, but in the end it will come down to how many track days I get out of them. That remains to be seen.
#88
Just to add, Movit discs are a direct fit onto the original PCCB calipers, no spacers or other changes needed.
And now Tom from Movit seems to be moving them towards helping me.
And now Tom from Movit seems to be moving them towards helping me.
#89
Three Wheelin'
Someone posted this on another forum about PTV potentially damaging PCCB and of course Porsche refusing to warranty it - http://jimmy348.blogspot.com/
#90
Nordschleife Master
Someone posted this on another forum about PTV potentially damaging PCCB and of course Porsche refusing to warranty it - http://jimmy348.blogspot.com/
He is now running brembo type III rotors. They still look brand new after 5 track days