First Mod on my 991 GT3
1 Attachment(s)
Had to start somewhere and the clear repeaters for the front still aren't here, and in the absence of any exhaust/suspension and brakes mods to try I had to do something.
VIR sticker on the rear windshield duly applied. Took great care, measured the center of the screen, cleaned using high quality glass products and a micro fibre cloth. Looks good in white. Worth +5mph out of oak tree for sure. Keeping the little track icon sticker for the side window until I get to drive the 'new' VIR post repaving and allegedly widening in places, when they *finally* reopen in march. |
Nice!
|
Tha's it? :) I thought I was going to see your car lifted up in the air with all the parts on the floor.
|
Originally Posted by silverrules
(Post 11007036)
Tha's it? :) I thought I was going to see your car lifted up in the air with all the parts on the floor.
Rollbar then seats would be nice although getting silence from european outlets as everyone is probably off over christmas and new year. Be good to have a 991 GT3 Sharkwerks exhaust bypass. Performance friction have pads for the new car but that seems to be it for the moment. |
You right, everybody kicking back this time of the year. Are you going to leave the PORSCHE sign in the rear alone? I have mixed feeling about the PORSCHE sign on my tail but haven't decided. It will make the GT3 stand out.
|
Here is your honey-do-list:
Techquipment car cover sun shade 1.5m long 3/4 breaker bar for the center locks 1.5m long torque wrench that can handle 600nm Castrol Optimoly paste center lock wheel alignment pin clear bra windshield film hardwire install of radar detector clear side markers paint rear reflectors body color aluminum pedal covers fire extinguisher hardwire data acquisition system track friendly alignment & corner balance And don't forget... PCA stickers! |
Gotdamn that ass!!
Also, good list Chromium :) |
Originally Posted by silverrules
(Post 11007064)
You right, everybody kicking back this time of the year. Are you going to leave the PORSCHE sign in the rear alone? I have mixed feeling about the PORSCHE sign on my tail but haven't decided. It will make the GT3 stand out.
Take all of it off, then buy the black GT3 logo for the 997.2. That logo is larger, so it will look a lot better, filling the space with better proportion, and you'll be able to center it vertically. I think it would look "off" if you merely took off the "PORSCHE" and left the GT3 logo as-is. |
+1 on clear bra!
|
Nice list.
Status:- Done:thumbup: Techquipment car cover Pass : sun shade Done from the 997.2 :thumbup: 1.5m long 3/4 breaker bar for the center locks Done from the 997.2 :thumbup: 1.5m long torque wrench that can handle 600nm Done from the 997.2 :thumbup: Castrol Optimoly paste Never needed so Pass : center lock wheel alignment pin Done :thumbup: clear bra Done :thumbup: (ready to install) windshield film Pass: I dont hardwire into the track vehicle and stick the detector in as required : hardwire install of radar detector Ordered :thumbup: : clear side markers Going to try and Wrap instead : paint rear reflectors body color Good one: aluminum pedal covers OEM Option Done :thumbup:: fire extinguisher Solo DL Installed today via ODBII :thumbup:: hardwire data acquisition system Now this will be a challenge as no baseline yet : track friendly alignment & corner balance Tomorrow, thanks for the reminder :thumbup: And don't forget... PCA stickers! |
Originally Posted by silverrules
(Post 11007064)
You right, everybody kicking back this time of the year. Are you going to leave the PORSCHE sign in the rear alone? I have mixed feeling about the PORSCHE sign on my tail but haven't decided. It will make the GT3 stand out.
|
Originally Posted by FLM911
(Post 11007202)
Nice list.
Status:- Done:thumbup: Techquipment car cover Pass : sun shade Done from the 997.2 :thumbup: 1.5m long 3/4 breaker bar for the center locks Done from the 997.2 :thumbup: 1.5m long torque wrench that can handle 600nm Done from the 997.2 :thumbup: Castrol Optimoly paste Never needed so Pass : center lock wheel alignment pin Done :thumbup: clear bra Done :thumbup: (ready to install) windshield film Pass: I dont hardwire into the track vehicle and stick the detector in as required : hardwire install of radar detector Ordered :thumbup: : clear side markers Going to try and Wrap instead : paint rear reflectors body color Good one: aluminum pedal covers OEM Option Done :thumbup:: fire extinguisher Solo DL Installed today via ODBII :thumbup:: hardwire data acquisition system Now this will be a challenge as no baseline yet : track friendly alignment & corner balance Tomorrow, thanks for the reminder :thumbup: And don't forget... PCA stickers! |
Very cool and we ahem... Have something:) want me to send you one?;)
|
Originally Posted by sharkster
(Post 11007255)
Very cool and we ahem... Have something:) want me to send you one?;)
|
Originally Posted by sharkster
(Post 11007255)
Very cool and we ahem... Have something:) want me to send you one?;)
|
All times are GMT -3. The time now is 02:15 AM. |
© 2024 MH Sub I, LLC dba Internet Brands