First Mod on my 991 GT3
12-27-2013, 11:54 PM
#1
Racer
Thread Starter
First Mod on my 991 GT3
Had to start somewhere and the clear repeaters for the front still aren't here, and in the absence of any exhaust/suspension and brakes mods to try I had to do something.
VIR sticker on the rear windshield duly applied.
Took great care, measured the center of the screen, cleaned using high quality glass products and a micro fibre cloth.
Looks good in white.
Worth +5mph out of oak tree for sure.
Keeping the little track icon sticker for the side window until I get to drive the 'new' VIR post repaving and allegedly widening in places, when they *finally* reopen in march.
VIR sticker on the rear windshield duly applied.
Took great care, measured the center of the screen, cleaned using high quality glass products and a micro fibre cloth.
Looks good in white.
Worth +5mph out of oak tree for sure.
Keeping the little track icon sticker for the side window until I get to drive the 'new' VIR post repaving and allegedly widening in places, when they *finally* reopen in march.
I thought I was going to see your car lifted up in the air with all the parts on the floor.
12-28-2013, 12:07 AM
#4
Racer
Thread Starter
Rollbar then seats would be nice although getting silence from european outlets as everyone is probably off over christmas and new year.
Be good to have a 991 GT3 Sharkwerks exhaust bypass.
Performance friction have pads for the new car but that seems to be it for the moment.
12-28-2013, 12:21 AM
#5
Drifting
You right, everybody kicking back this time of the year. Are you going to leave the PORSCHE sign in the rear alone? I have mixed feeling about the PORSCHE sign on my tail but haven't decided. It will make the GT3 stand out.
12-28-2013, 12:23 AM
#6
Drifting
Join Date: Jul 2009
Location: Black Sheep Racing World HQ
Posts: 3,278
Likes: 0
Received 24 Likes
on
13 Posts
Here is your honey-do-list:
Techquipment car cover
sun shade
1.5m long 3/4 breaker bar for the center locks
1.5m long torque wrench that can handle 600nm
Castrol Optimoly paste
center lock wheel alignment pin
clear bra
windshield film
hardwire install of radar detector
clear side markers
paint rear reflectors body color
aluminum pedal covers
fire extinguisher
hardwire data acquisition system
track friendly alignment & corner balance
And don't forget... PCA stickers!
Techquipment car cover
sun shade
1.5m long 3/4 breaker bar for the center locks
1.5m long torque wrench that can handle 600nm
Castrol Optimoly paste
center lock wheel alignment pin
clear bra
windshield film
hardwire install of radar detector
clear side markers
paint rear reflectors body color
aluminum pedal covers
fire extinguisher
hardwire data acquisition system
track friendly alignment & corner balance
And don't forget... PCA stickers!
Trending Topics
12-28-2013, 12:28 AM
#8
Drifting
Join Date: Jul 2009
Location: Black Sheep Racing World HQ
Posts: 3,278
Likes: 0
Received 24 Likes
on
13 Posts
Take all of it off, then buy the black GT3 logo for the 997.2. That logo is larger, so it will look a lot better, filling the space with better proportion, and you'll be able to center it vertically. I think it would look "off" if you merely took off the "PORSCHE" and left the GT3 logo as-is.
12-28-2013, 02:29 AM
#10
Racer
Thread Starter
Nice list.
Status:-
Done
Techquipment car cover
Pass : sun shade
Done from the 997.2 1.5m long 3/4 breaker bar for the center locks
Done from the 997.2 1.5m long torque wrench that can handle 600nm
Done from the 997.2 Castrol Optimoly paste
Never needed so Pass : center lock wheel alignment pin
Done clear bra
Done (ready to install) windshield film
Pass: I dont hardwire into the track vehicle and stick the detector in as required : hardwire install of radar detector
Ordered : clear side markers
Going to try and Wrap instead : paint rear reflectors body color
Good one: aluminum pedal covers
OEM Option Done: fire extinguisher
Solo DL Installed today via ODBII: hardwire data acquisition system
Now this will be a challenge as no baseline yet : track friendly alignment & corner balance
Tomorrow, thanks for the reminder And don't forget... PCA stickers!
Status:-
Done
Techquipment car coverPass : sun shade
Done from the 997.2
1.5m long 3/4 breaker bar for the center locksDone from the 997.2
1.5m long torque wrench that can handle 600nmDone from the 997.2
Castrol Optimoly pasteNever needed so Pass : center lock wheel alignment pin
Done
clear braDone
(ready to install) windshield filmPass: I dont hardwire into the track vehicle and stick the detector in as required : hardwire install of radar detector
Ordered
: clear side markersGoing to try and Wrap instead : paint rear reflectors body color
Good one: aluminum pedal covers
OEM Option Done
: fire extinguisherSolo DL Installed today via ODBII
: hardwire data acquisition systemNow this will be a challenge as no baseline yet : track friendly alignment & corner balance
Tomorrow, thanks for the reminder
And don't forget... PCA stickers!
12-28-2013, 02:30 AM
#11
Racer
Thread Starter
Going to leave it for a while, still getting used to it.
12-28-2013, 02:40 AM
#12
Drifting
Join Date: Jul 2009
Location: Black Sheep Racing World HQ
Posts: 3,278
Likes: 0
Received 24 Likes
on
13 Posts
Nice list.
Status:-
Done Techquipment car cover
Pass : sun shade
Done from the 997.2 1.5m long 3/4 breaker bar for the center locks
Done from the 997.2 1.5m long torque wrench that can handle 600nm
Done from the 997.2 Castrol Optimoly paste
Never needed so Pass : center lock wheel alignment pin
Done clear bra
Done (ready to install) windshield film
Pass: I dont hardwire into the track vehicle and stick the detector in as required : hardwire install of radar detector
Ordered : clear side markers
Going to try and Wrap instead : paint rear reflectors body color
Good one: aluminum pedal covers
OEM Option Done: fire extinguisher
Solo DL Installed today via ODBII: hardwire data acquisition system
Now this will be a challenge as no baseline yet : track friendly alignment & corner balance
Tomorrow, thanks for the reminder And don't forget... PCA stickers!
Status:-
Done
Techquipment car coverPass : sun shade
Done from the 997.2
1.5m long 3/4 breaker bar for the center locksDone from the 997.2
1.5m long torque wrench that can handle 600nmDone from the 997.2
Castrol Optimoly pasteNever needed so Pass : center lock wheel alignment pin
Done
clear braDone
(ready to install) windshield filmPass: I dont hardwire into the track vehicle and stick the detector in as required : hardwire install of radar detector
Ordered
: clear side markersGoing to try and Wrap instead : paint rear reflectors body color
Good one: aluminum pedal covers
OEM Option Done
: fire extinguisherSolo DL Installed today via ODBII
: hardwire data acquisition systemNow this will be a challenge as no baseline yet : track friendly alignment & corner balance
Tomorrow, thanks for the reminder
And don't forget... PCA stickers!
