First Mod on my 991 GT3
01-01-2014, 04:24 PM
#31
Rennlist Member
Nice list.
Status:-
Done
Techquipment car cover
Pass : sun shade
Done from the 997.2 1.5m long 3/4 breaker bar for the center locks
Done from the 997.2 1.5m long torque wrench that can handle 600nm
Done from the 997.2 Castrol Optimoly paste
Never needed so Pass : center lock wheel alignment pin
Done clear bra
Done (ready to install) windshield film
Pass: I dont hardwire into the track vehicle and stick the detector in as required : hardwire install of radar detector
Ordered : clear side markers
Going to try and Wrap instead : paint rear reflectors body color
Good one: aluminum pedal covers
OEM Option Done: fire extinguisher
Solo DL Installed today via ODBII: hardwire data acquisition system
Now this will be a challenge as no baseline yet : track friendly alignment & corner balance
Tomorrow, thanks for the reminder And don't forget... PCA stickers!
Status:-
Done
Techquipment car coverPass : sun shade
Done from the 997.2
1.5m long 3/4 breaker bar for the center locksDone from the 997.2
1.5m long torque wrench that can handle 600nmDone from the 997.2
Castrol Optimoly pasteNever needed so Pass : center lock wheel alignment pin
Done
clear braDone
(ready to install) windshield filmPass: I dont hardwire into the track vehicle and stick the detector in as required : hardwire install of radar detector
Ordered
: clear side markersGoing to try and Wrap instead : paint rear reflectors body color
Good one: aluminum pedal covers
OEM Option Done
: fire extinguisherSolo DL Installed today via ODBII
: hardwire data acquisition systemNow this will be a challenge as no baseline yet : track friendly alignment & corner balance
Tomorrow, thanks for the reminder
And don't forget... PCA stickers!
