Carbon Rear Wing End Plates for RS
#1
Carbon Rear Wing End Plates for RS
Competition Motorsport (CMS) is proud to announce the release of our latest C3 Carbon product.
Replacement rear wing end plates for the GT3RS made of 100% pre-preg 2x2 twill dry carbon fiber to match the OEM rear wing.
C3 Carbon 100% carbon fiber rear wing end plates with the look, fitment, and finish that matches your GT3 RS carbon rear wing perfectly.
C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates.
The result of countless hours of refinement, the fitment is as good as the OEM Porsche parts.
The look, however, is pure carbon fiber! These really are the pieces Porsche should have put on the GT3 RS in the first place.
The 2x2 carbon weave matches the rear wing to perfection, lining up seamlessly with the wing's weave.
The high-gloss automotive urethane top coat is hand-applied and polished to a smooth mirror finish.
Easy bolt on replacement of the plastic OEM end plates. Installation takes less than 10 minutes and can be accomplished in your garage.
We are offering a new product introduction special for the first 10 sets.
Normally $1,495, we are offering the first 10 sets for $995 as a pre-order special for RL members. We are expecting to be ready to ship the sets the first week of July.
You can find them here on our website
For the pre-order special price for the first 10 pairs please use code: "C3ENDPLATE"
Replacement rear wing end plates for the GT3RS made of 100% pre-preg 2x2 twill dry carbon fiber to match the OEM rear wing.
C3 Carbon 100% carbon fiber rear wing end plates with the look, fitment, and finish that matches your GT3 RS carbon rear wing perfectly.
C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates.
The result of countless hours of refinement, the fitment is as good as the OEM Porsche parts.
The look, however, is pure carbon fiber! These really are the pieces Porsche should have put on the GT3 RS in the first place.
The 2x2 carbon weave matches the rear wing to perfection, lining up seamlessly with the wing's weave.
The high-gloss automotive urethane top coat is hand-applied and polished to a smooth mirror finish.
Easy bolt on replacement of the plastic OEM end plates. Installation takes less than 10 minutes and can be accomplished in your garage.
We are offering a new product introduction special for the first 10 sets.
Normally $1,495, we are offering the first 10 sets for $995 as a pre-order special for RL members. We are expecting to be ready to ship the sets the first week of July.
You can find them here on our website
For the pre-order special price for the first 10 pairs please use code: "C3ENDPLATE"
Last edited by CMS; 06-13-2019 at 02:33 PM.
#2
Those look fantastic! Any chance of making a carbon set of GT2 RS endplates with fitment for the GT3 RS? I know there are many others interested besides myself in such a product.
#3
#4
Rennlist Member
Looks like a nice product but guys be careful of mixing the 2 and 3RS endplates. There is probably a 15-20% effective change to the wing because of different size endplates, its more than you think. There is a lot of engineering work done to balance the aerodynamic effect of those cars I can tell you from experience I would be hesitant to just start changing parts. Not meant to offend or disparage the bits they look well made just my 2 cents on making an arbitrary swap.
#5
Drifting
I would so be in for a set of GT2RS endplates that fit the GT3RS. But not in carbon. In black to match the OEM.
#6
Just to be clear, these are identical in shape and size to the stock 991.2 GT3RS end plates (they are not the larger GT2 end plates). Their aerodynamic function will be the same as the stock pieces, just in carbon fiber instead of painted plastic.
Trending Topics
#9
Rennlist Member
#10
Any chance you guys will produce the GT2 RS ones?
#13
Drifting
I started a thread a while back about the GT2RS endplates for the 3RS. Lots of demand for that...